Desenvolvimento do Trato Gastrointestinal de Embriões Oriundos de Matrizes Pesadas de 30 e 60 Semanas de Idade

O objetivo deste trabalho foi investigar o efeito da idade das matrizes pesadas sobre o desenvolvimento do trato gastrointestinal (TGI) dos embriões no terço final do período de incubação, bem como a utilização das reservas do saco vitelino nas 24 h pós-eclosão, em pintos alimentados ou em jejum. Foram utilizados ovos férteis da linhagem Cobb 500, oriundos de matrizes pesadas com 30 e 60 semanas de idade. O desenvolvimento do TGI (proventrículo+moela, segmentos do intestino delgado e saco vitelino) foi estudado entre o 17º e 21º dias de incubação (Experimento 1). Nas 24 h pós-eclosão foi pesquisado o efeito da presença ou não de alimento no lúmen intestinal sobre a utilização das reservas do saco vitelino (Experimento 2). Os achados deste trabalho mostraram que, ao contrário do embrião, o desenvolvimento do intestino delgado e o peso do saco vitelino não sofreram influência da idade das matrizes. Na fase pós-eclosão, na ausência de alimento, o desenvolvimento do intestino delgado foi maior nas matrizes com 60 semanas, sendo dependente do crescimento do jejuno. A presença do alimento no lúmen teve influência na utilização das reservas do saco vitelino apenas nas matrizes com 30 semanas de idade. Os resultados deste experimento mostraram que a idade da matriz é importante fator no desenvolvimento do trato gastrointestinal do embrião, sendo fator relevante no crescimento pós-ecloão dos pintos.

Recombinant expression of glycerol-3-phosphate dehydrogenase using the Pichia pastoris system

In the present study, the GPD2 gene from Saccharomyces cerevisiae, which codifies for the enzyme glycerol-3-phosphate dehydrogenase (GPDH), was cloned from the pPICZ-alpha expression vector and used with the purpose of inducing the extracellular expression of the glycerol-3-phosphate dehydrogenase under the control of the methanol-regulated AOX promoter. The presence of the GPD2 insert was confirmed by PCR analysis. Pichia pastoris X-33 (Mut(+)) was transformed with linearized plasmids by electroporation and transformants were selected on YPDS plates containing 100 mu g/mL of zeocin. Several clones were selected and the functionality of this enzyme obtained in a culture medium was assayed. Among the mutants tested, one exhibited 3.1 x 10(-2) U/mg of maximal activity. Maximal enzyme activity was achieved at 6 days of growth. Medium composition and pre-induction osmotic stress influenced protein production. Pre-induction osmotic stress (culturing cells in medium with either 0.35 M sodium chloride or 1.0 M sorbitol for 4h prior to induction) led to an increase in cell growth with sorbitol and resulted in a significant increase in GPDH productivity with sodium chloride in 24h of induction approximately fivefold greater than under standard conditions (without pre-induction). (C) 2010 Elsevier B.V. All rights reserved.

Dietary restriction, caloric value and the accumulation of hepatic fat

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Realized evolvability: quantifying phenotypic evolution in a Drosophila clade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7

Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance to wear, reworking and rebuilding operations and repair of worn components on landing gear, hydraulic cylinders, actuators, propeller hub assemblies, gas turbine engines, and so on. The aircraft industry is also trying to use thermal spray technology to replace electroplating coatings such as hard chromium. In the present work, WC-Co coatings were built up on an AA 7050 aluminum alloy using high velocity oxygen fuel (HVOF) technology and a liquid nitrogen cooling prototype system. The influence of the spray parameters (standard conditions, W19S, increasing the oxygen flux, W19H, and also increasing the carrier gas flux, W19F) on corrosion, friction, and abrasive wear resistance were also studied. The coatings were characterized using optical (OM) and scanning electron (SEM) microscopy, and X-ray diffraction (XRD). The friction and abrasive wear resistance of the coatings were studied using Rubber Wheel and Ball on Disk tests. The electrochemical studies were conducted using open-circuit potential (E(oc)) measurements and electrochemical impedance spectroscopy (EIS). Differences among coated samples were mainly related to the variation of the thermal spray parameters used during the spray process. No significant differences were observed in the wear resistance for the coatings studied, and all of them showed a wear rate around 10 times lower than that of the aluminum alloy. The results of mass loss and wear rate were interpreted considering different mechanisms. Comparing the different spray parameters, the oxygen flux (higher flame temperature) produced the sample which showed the highest corrosion resistance in aerated and unstirred 3.5% NaCl solution. Aluminum ions were detected on the surface almost immediately after the immersion of samples W19S and W19F in chloride solution, showing that the electrolyte reached the substrate and galvanic corrosion probably occurred. For sample W19H, aluminum ions were not detected even after 120 min of immersion in NaCl solution. (C) 2008 Elsevier B.V. All rights reserved.

Corrosion and Wear Studies of Cr3C2NiCr-HVOF Coatings Sprayed on AA7050 T7 Under Cooling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dietary macronutrients, endocrine functioning and intermediary metabolism in broiler chickens - Pair wise substitutions between protein, fat and carbohydrate

Three pens of male broiler chicks were raised under standard conditions and fed from 7 to 42 days of age three isocaloric diets each with 15.8; 19.6 and 19.5% of CP; and 51, 51, and 44% of CHO; and 6.5; 3.0 and 7.7% of fat, and designated as the low protein (LowCP), low lipid (LowL) and low carbohydrate (LowCHO) diets, respectively. Body weights and feed intake were monitored weekly and blood samples were collected at the same time for posterior analysis of hormone and metabolite content. Chickens fed the LowCP diet were characterized by a reduced body weight gain and feed intake and poorer feed conversion efficiency compared to those fed the LowL and LowCHO diets, which were very similar in this respect. Plasma corticosterone and glucose levels and creatine kinase activity were not significantly changed by diet composition. LowCP chickens were characterised by the lowest plasma T-4 and uric acid levels (indicative for reduced protein breakdown and lower protein ingestion) but highest plasma triglyceride levels (congruent with their higher fat deposition) compared to the LowL and LowCHO chickens. LowL chickens had on average higher plasma T-3 and free fatty acid levels compared to the LowCP and LowCHO chickens.In conclusion, a limited substitution of carbohydrate for fat in iso-nitrogenous, iso-energetic diets has no pronounced effects on plasma hormone and metabolite levels, except for the elevation in T-3 (may enhance glucose uptake) and free fatty acid levels in the plasma of the chickens fed the LowL diet. The protein content of the diet has a greater impact on zootechnical performance, and underlying endocrine regulation of the intermediary metabolism compared to the dietary lipid and CHO fraction. (C) 2003 Elsevier B.V. All rights reserved.

A comparative study of MPPT strategies and a novel singlephase integrated buck-boost inverter for small wind energy conversion systems

This paper presents the analysis of some usual MPPT (Maximum Power Point Tracking) strategies intended for small wind energy conversion (up to 1kW) based on permanent magnet synchronous generators (PMSG), considering the stand-alone application for a novel buck-boost integrated inverter. Each MPPT method is analytically introduced and then it is simulated using MatLab/Simulink considering standard conditions of wind and also commercially available turbines and generators. The extracted power in each case is compared with the maximum available power, so the tracking factor is calculated for each method. Thus, the focus is on the application to improve the efficiency of stand-alone wind energy conversion systems (WECS) with battery chargers and AC load supplied by inverter. Therefore, for this purpose a novel single phase buck-boost integrated inverter is introduced. Finally, the main experimental results for the introduced inverter are presented. © 2011 IEEE.

Estudo dos difenilfosfinatos de lantânio ativados por cério, európio e térbio emissores luminescentes multicores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da resistência ao desgaste e à corrosão de revestimentos metálico-cerâmicos aplicados na liga AA7050 mediante aspersão térmica oxicombustível de alta velocidade (HVOF)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Accumulation of dry mass and macronutrients by sourgrass plants

The experiment was carried out aiming to analyze the dry mass production and distribution and the content and accumulation of macronutrients in sourgrass (Digitaria insularis) plants cultivated under mineral nutrition standard conditions. Plants grew in 7-liter pots filled with sand substrate and daily irrigated with nutrient solution, being maintained under greenhouse conditions. Treatments consisted of times of evaluation (21, 35, 49, 63, 77, 91, 105, 119, and 133 days after emergence - DAE) and were arranged in a completely randomized design with four replicates. Sourgrass showed small accumulation of dry mass (0.3 g per plant) and macronutrients (3.7 mg of N per plant, 0.4 mg of P per plant, 5.6 mg of K per plant, 0.9 mg of Ca per plant, 0.7 mg of Mg per plant, and 0.3 mg of S per plant) at vegetative growth stage (< 49 DAE). Those accumulations increased mainly after 77 DAE, reaching the maximum theoretical value at 143, 135, 141, 129, 125, 120, and 128 DAE, for dry mass (12.4 g per plant), N (163.2 mg per plant), P (27.1 mg per plant), K (260.5 mg per plant), Ca (47.6 mg per plant), Mg (30.9 mg per plant), and S (13.7 mg per plant), respectively. K and N were found with higher rates and, as a consequence, they were required and accumulated in greater amounts in plant tissues of sourgrass.

Crescimento e nutrição mineral de Sida rhombifolia

This experiment was carried out to analyze dry mass production and distribution, and the content and accumulation of macronutrients in arrowleaf sida (Sida rhombifolia) plants cultivated under mineral nutrition standard conditions. Plants grew in seven liter pots filled with sand substrate and daily irrigated with nutrient solution, under greenhouse conditions. Treatments consisted of times of evaluation (21, 35, 49, 63, 77, 91, 105, 119, and 133 days after emergence - DAE) and were arranged in a completely randomized design with four replicates. Arrowleaf sida plants showed small accumulation of dry mass (0.3 g per plant) and macronutrients (6.9 mg N per plant, 0.7 mg P per plant, 8.6 mg K per plant, 4.9 mg Ca per plant, 2,6 mg Mg per plant, and 0.3 mg S per plant) at the vegetative growth stage (< 49 DAE). Those accumulations increased, mainly after 63 DAE, and the daily accumulation rate was crescent up to 94 DAE (dry mass - DM), 89 DAE (N and P), 98 DAE (K), 95 DAE (Ca and S), and 93 DAE (Mg), when there was accumulation of 26.3 g DM per plant, 402.6 mg N per plant, 45.6 mg P per plant, 359.3 mg K per plant, 337.6 mg Ca per plant, 71.9 mg Mg per plant, and 20.9 mg S per plant. N and K had the highest rates and, consequently, were the most required and accumulated in greater amounts in plant tissues of arrowleaf sida.

Effect of ultrasonic ecxitation on the ultimate tensili strength of glass ionomer cements after different water storage times

The application of ultrasound waves with a conventional dental ultrasonic scaler on glass ionomer cements surface accelerated initial setting reaction and improved the mechanical properties. Objective: This study evaluated the ultimate tensile strength of glass ionomer cements after ultrasonic excitation and different water storage times. Material and method: Twelve specimens of each material (Fuji IX GP, Ketac Molar Easymix and Vitremer) were prepared, and six of each received a 30-second ultrasound application during initial setting of the cements. After storage of the 24 hours or 30 days, the specimens were sectioned into stick to microtensile testing and the mean ultimate tensile strength values were submitted to Welch’s ANOVA and Tamhane’s test. Result: The results showed that the Vitremer presented the highest mean tensile strength. The chemically set Fuji IX GP presented significantly higher mean tensile strength after 30 days than after 24 hours of storage (p < 0.05). At 24 hours, the ultrasonically set Fuji IX GP presented significantly higher mean tensile strength than their counterparts set under standard conditions (p < 0.05). Conclusion: Treatment with ultrasound increased the tensile strength of Fuji IX GP in the early period of maturation.

Crescimento e nutrição mineral de Urochloa arrecta

The experiment was carried out aiming to analyze dry mass production and distribution, and the content and accumulation of macronutrients in Urochloa arrecta plants cultivated under mineral nutrition standard conditions. Plants grew in seven-liter pots filled with sand substrate, were daily irrigated with nutrient solution, and maintained under greenhouse conditions. Treatments corresponded to assessment periods (21, 35, 49, 63, 77, 91, 105, 119, 133, 147, and 161 days after emergence - DAE) and were arranged in a completely randomized design with four replicates. Plants of U. arrecta showed low accumulation (less than 7% of the maximum accumulation at 161 DAE) of dry mass (5.1 g DM per planta) and of macronutrients (57.7 mg N per planta, 8.9 mg P per planta, 167.8 mg K per planta, 21.3 mg Ca per planta, 14.7 mg Mg per planta, and 9.2 mg S per planta) up to 49 DAE. Such accumulations increased mainly after 91 DAE. Daily accumulation rate was crescent up to 130 DAE (DM and S), 137 DAE (N), 125 DAE (P), 119 DAE (K), 144 DAE (Ca), and 128 DAE (Mg), when there was accumulation of 87.7 g DM per planta, 918.0 mg N per planta, 105.8 mg P per planta, 1,643.9 K per planta, 390.4 mg Ca per planta, 200.0 mg Mg per planta, and 103.5 mg S per planta. K and N were found to have the highest rates and, hence, they were the most demanded and accumulated in the greatest amounts in U. arrecta plant tissues.

Biomassa do fungo filamentoso Lasiodiplodia theobromae: composição química e utilização como nutriente para bioprocesso

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)