Esterase patterns and phylogenetic relationships of species and strains included in the Drosophila buzzatii cluster

Ten strains of two species in the Drosophila buzzatii cluster (D. serido and D. seriema) were examined as to esterase patterns using polyacrylamide gel electrophoresis. The migration rate of esterases, and their substrate specificity to alpha and beta naphthyl acetates, were analysed. Other esterase features such as inhibition behaviour, presence in males and females and location in the head, thorax or abdomen of flies, were also examined. The present data,together with results obtained by others for eight strains of D. koepferae, D. serido, D. seriema and D. buzzatii, show that 69 bands have been detected in the eighteen strains studied. This total number of bands was used for comparison of strains and species by similarity index, analysis of dependence and cluster analysis. The comparisons confirmed the existence of a high degree of similarity among D. seriema strains and among D. koepferae strains, but indicated differentiation among the D. serido strains. Two strains (D69R2 and D69R5) which differed from the others of the latter species, showed closer affinities with D. buzzatii, which indicates the need for further work on those strains classified as D. serido.

Effect of porcine reproductive and respiratory syndrome virus on subsequent Pasteurella multocida challenge in pigs

This trial was conducted to evaluate the effect of Porcine reproductive and respiratory syndrome virus (PRRSv) on a subsequent challenge with Pasteurella multocida in pigs. Sixteen, 3-4 week-old piglets, from a PRRSv and Aujeszky disease virus (ADV) free herd were used. Animals were equally and randomly allocated in four groups which were treated according the following schedule: Group I: negative controls; Group II: inoculation with only PRRSV; Group III: inoculation with PRRSV and P. multocida; Group IV: inoculation with ADV and multocida (positive controls), PRRSV and ADV were inoculated intranasally, at the doses of 10(4.6) and 10(4.5) TCID50/ml, respectively. Five days later, pigs from groups III and IV were inoculated intranasally, with two ml of a 10(9) CFU/mL suspension of equal parts of P. multocida, strains A52 and A24. No lesions were observed in piglets of group I. Microscopically, interstitial pneumonia was identified in all piglets of groups II and III and 3/4 piglets from group IV. Bronchopneumonia was detected in 3/4 of the piglets from group III and in all animals of group TV which, additionally, showed meningo-encephalitis and purulent rhinitis. Macroscopically, only piglets of groups III and IV had lung consolidation. However, much lower pneumonic scores (2.3%) were observed in group III, where 3 of 4 piglets were affected. on the other hand, all piglets of group IV showed some degree of pulmonary consolidation, with a mean score of 13.7%. Based on these results, it appears that the role of PRRSV as a initiator of secondary diseases is still undefined, but is probably mild, There was no clear interaction between PRRSV and Pasteurella multocida under the conditions and strains tested here. (C) 1997 Elsevier B.V. B.V.

Geotechnical and structural behavior of the railroad track in large-scale apparatus

This paper analyses the static and dynamic behavior of the railroad track model in laboratory. Measurements of stresses and strains on a large-scale railroad track apparatus were studied. The model includes: compacted soil, representing the final layers of platform, ballast layer, and ties (steel, wooden, and pre-stressed concrete). The soil and soil ballast interface were instrumented with pneumatic stress gauge. Settlement measurement device were positioned at the same levels as the load cells. Loads were applied by hydraulic actuators, statically and dynamically. After the prescribed number of load cycles, in pre-determined intervals, stresses and strains were measured. Observations indicate that stress and strain distributions, transmitted by wooden or steel ties, behave similarly. A more favorable behavior was observed with pre-stressed concrete mono block ties. Non-linear response was observed after a threshold numbers of cycles were surpassed, showing that the strain modulus increases with the numbers of cycles. © 2009 IOS Press.

Photoelastic stress analysis of splinted and unitary implant-supported prostheses

The aim of this study was to evaluate the effects that splinting and different lengths of implants have on the stress distribution in implant-supported prostheses by photoelastic analysis. A total of five photoelastic resin models were made with different proposed situations, and 400 load applications were performed for the analysis. Compared with the unitary prosthesis, the splinted implant-supported prosthesis acted favorably in the distribution of stresses and strains to the implant (p < 0.001). The increase in length was a significant factor in the stress distribution (p < 0.05) and, ultimately, the overall reduction in stress. It was concluded that the splinted implant-supported prosthesis behaved better biomechanically compared with the unitary prosthesis.

Bone stress and strain after use of a miniplate for molar protraction and uprighting: a 3-dimensional finite element analysis

The aim of this study was to use the finite element method to evaluate the distribution of stresses and strains on the local bone tissue adjacent to the miniplate used for anchorage of orthodontic forces. Methods: A 3-dimensional model composed of a hemimandible and teeth was constructed using dental computed tomographic images, in which we assembled a miniplate with fixation screws. The uprighting and mesial movements of the mandibular second molar that was anchored with the miniplate were simulated. The miniplate was loaded with horizontal forces of 2, 5, and 15 N. A moment of 11.77 N.mm was also applied. The stress and strain distributions were analyzed, and their correlations with the bone remodeling criteria and miniplate stability were assessed. Results: When orthodontic loads were applied, peak bone strain remained within the range of bone homeostasis (100-1500 mu m strain) with a balance between bone formation and resorption. The maximum deformation was found to be 1035 mu m strain with a force of 5 N. At a force of 15 N, bone resorption was observed in the region of the screws. Conclusions: We observed more stress concentration around the screws than in the cancellous bone. The levels of stress and strain increased when the force was increased but remained within physiologic levels. The anchorage system of miniplate and screws could withstand the orthodontic forces, which did not affect the stability of the miniplate.

Propriedades reológicas e efeito da adição de sal na viscosidade de exopolissacarídeos produzidos por bactérias do gênero Rhizobium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antimicrobial activity of the essential oils of some spice herbs

Essential oils were obtained from fennel seeds, dill, cumin and coriander. Their antimicrobial activity was tested on isolated clinical specimens of patients treated at the University Hospital of the School of Medicine of Botucatu, SP, UNESP. Microorganisms were grown in BHI (Brain Heart Infusion/Oxoid) at 37oC/18 hours and resuspended in 0,5 Mac Farland's Standard (1,5 x 108 CFU/mL). The diffusion method was performed, putting 10 μl of the essential oils on paper disks (6mm of diameter) (Blank Disks/CECON) at 37oC/24 hours. After this period, the disks were put on plates containing Mueller Hinton Agar (Oxoid) and inoculated with the microorganisms. After 48 hours at 37oC, inhibitory zones were measured (mm) for the respective oils and strains. The essential oil from Anethum graveolens showed antimicrobial activity against Staphylococcus aureus (inhibitory zone=18 mm), Salmonella sp. (=11 mm) and E. coli (10 mm). The Cuminum cyminum essential oil was effective against E. coli, P. aeruginosa and Salmonella sp. and their inhibitory zones were 18, 10 and 23 mm, respectively. Coriandrum sativum oil was active only against Salmonella sp. (18 mm) and Foeniculum vulgare inhibited only E. coli (9 mm).

Mechanical behavior of isolated intervertebral disc

The study on several components of intervertebral joints is essential to understand the spine's degenerative mechanisms and to assess the best method for their treatment. For such study it is necessary to know the mechanical properties of the isolated intervertebral disc (ID) mechanical properties and, it is necessary to evaluate its stresses and strains. In order to assess the ID displacements, a fine, U-shaped blade was developed, over which two extensometers connected in a Wheatstone bridge were placed. The device was then tested on porcine spine ID, where compression loads were applied and the extremities displacements of the blade coupled to the intervertebral disc were measured. Stress/strain diagram, both on the compression and on the decompression phases, evidencing the non-linear nature of such relationship. With the experiment, it was possible to obtain approximate values of the longitudinal elasticity module (E) of the disc material and of the Poisson coefficient (n ). After several tests, E results are compatible with those obtained by others studies, with very simple and low-cost device. This experiments can be used for obtained others mechanical properties of isolated ID with precision and accuracy.

Acúmulo de biomassa em variedades de cana-de-açúcar inoculadas com diferentes estirpes de bactérias diazotróficas

The objective of this study was to evaluate the contribution of inoculation with diazotrophs, applied both individually and in combination, in commercial varieties of sugarcane. The experiment was carried out at the experimental grounds of Embrapa Agrobiologia, in Seropédica, Rio de Janeiro, Brazil. The experimental design was of randomised blocks, with sub-divided plots and six replications. Six varieties of sugarcane with six treatments were used: control, control with nitrogen, inoculation of the individual strains: BR 11512, BR 11724 and BR 11411, in addition to inoculation with a cocktail consisting of five strains of diazotrophs. Differences were observed between varieties and between treatments, and an interaction observed between the treatments and varieties. For all the parameters evaluated, no response was observed in the sugarcane varieties RB855536 and RB92606. In the variety RB918639, the only difference was in the accumulation of green biomass. No difference was observed between the treatments for total nitrogen accumulation. The most responsive variety to inoculation was RB867515, differing in the accumulation of fresh and dry biomass. This study showed that inoculation promotes the accumulation of biomass, the contribution being different for the varieties and strains of bacteria, suggesting an interaction between the factors studied. The variety RB867515 is promising for use in studies of inoculation with diazotrophs.

Seletividade de herbicidas à cultura da mandioca

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo teórico e experimental das ligações diretas contra-fiadas entre paredes de blocos de concreto em escala real e reduzida 1:4

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade populacional de Plutella xylostella (L., 1758) (Lepidoptera: Plutellidae) e suscetibilidade a Bacillus thuringiensis Berliner

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Comportamento ao cisalhamento da madeira de Eucalyptus citriodora através do ensaio OFF-AXIS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e sensibilidade de isolados de Xanthomonas axonopodis pv. citri a bacteriocinas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Método dos elementos finitos para determinação da área de contato, entre um rodado e uma superfície deformável

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)