The role of B-mode ultrasonography in the musculoskeletal anatomical evaluation of the cervical region of the dog spine

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização da rigidez póstero-anterior da coluna lombar in vivo: uma análise biomecânica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesis and physical properties of lipid-based poly(ester-urethane)s, I: Effect of varying polyester segment length

Four aliphatic thermoplastic poly(ester-urethane)s (PEUs) with similar molecular weights but varying polyesters molecular weight (534-1488 g/mol) were prepared from polyester diols, obtained by melt condensation of Azelaic acid and 1,9-Nonanediol, and 1,7-heptamethylene di-isocyanate (HPMDI) all sourced from vegetable oil feedstock. The thermal, and mechanical properties, and crystal structure of PEUs were investigated using DSC, TGA, DMA, tensile analysis and WAXD. For sufficiently long polyester chain, WAXD data indicated no hydrogen bonds polyethylene (PE)-like crystalline packing and for short polyester chains, small crystal domains with significant H-bonded polyamide (PA)-like packing. Crystallinity decreased with decreasing polyester molecular weights. The polymorphism of PEUs and consequently their melting characteristics were found to be largely controlled by polyester segment length. TGA of the PEUs indicated improved thermal stability with decreasing polyester chain length, suggesting a stabilization effect by urethane groups. Mechanical properties investigated by DMA and tensile analysis were found to scale predictably with the overall crystallinity of PEUs. (C) 2012 Elsevier Ltd. All rights reserved.

Superconducting state in a mesoscopic segment ring

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness

Engineers often face the challenge of reducing the level of vibrations experienced by a given payload or those transmitted to the support structure to which a vibrating source is attached. In order to increase the range over which vibrations are isolated, soft mounts are often used in practice. The drawback of this approach is the static displacement may be too large for reasons of available space for example. Ideally, a vibration isolator should have a high-static stiffness, to withstand static loads without too large a displacement, and at the same time, a low dynamic stiffness so that the natural frequency of the system is as low as possible which will result in an increased isolation region. These two effects are mutually exclusive in linear isolators but can be overcome if properly configured nonlinear isolators are used. This paper is concerned with the characterisation of such a nonlinear isolator comprising three springs, two of which are configured to reduce the dynamic stiffness of the isolator. The dynamic behaviour of the isolator supporting a lumped mass is investigated using force and displacement transmissibility, which are derived by modelling the dynamic system as a single-degree-of-freedom system. This results in the system dynamics being approximately described by the Duffing equation. For a linear isolator, the dynamics of the system are the same regardless if the source of the excitation is a harmonic force acting on the payload (force transmissibility) or a harmonic motion of the base (displacement transmissibility) on which the payload is mounted. In this paper these two expressions are compared for the nonlinear isolator and it is shown that they differ. A particular feature of the displacement transmissibility is that the response is unbounded at the nonlinear resonance frequency unless the damping in the isolator is greater than some threshold value, which is not the case for force transmissibility. An explanation for this is offered in the paper. (C) 2011 Elsevier Ltd. All rights reserved.

An experimental switchable stiffness device for shock isolation

The development of an experimental switching stiffness device fcr shock isolation is presented. The system uses magnetic forces to exert a restoring force, which results in an effective stiffness that is used to isolate a payload. When the magnetic force is turned on and off, a switchable stiffness is obtained. Characterization of the physical properties of the device is presented. They are estimated in terms of the percentage stiffness change and effective damping ratio when switched between two constant stiffness states. Additionally, the setup is used to implement a control strategy to reduce the shock response and minimize residual vibration. The system was found to be very effective for shock isolation. The response is reduced by around 50 percent compared with passive isolation showing good correlation with theoretical predictions, and the effective damping ratio in the system following the shock was increased from about 4.5 percent to 13 percent. (c) 2012 Elsevier Ltd. All rights reserved.

Direct effects of colchicine on myocardial function - Studies in hypertrophied and failing spontaneously hypertensive rats

The aging spontaneously hypertensive rat (SHR) is a model in which the transition from chronic stable left ventricular hypertrophy to overt heart failure can be observed. Although the mechanisms for impaired function in hypertrophied and failing cardiac muscle from the SHR have been studied, none accounts fully for the myocardial contractile abnormalities. The cardiac cytoskeleton has been implicated as a possible cause for myocardial dysfunction. If an increase in microtubules contributes to dysfunction, then myocardial microtubule disruption by colchicine should promote an improvement in cardiac performance. We studied the active and passive properties of isolated left ventricular papillary muscles from 18- to 24-month-old SHR with evidence of heart failure (SHR-F, n=6), age-matched SHR without heart failure (SHR-NF, n=6), and age-matched normotensive Wistar-Kyoto rats (WKY, n=5). Mechanical parameters were analyzed before and up to 90 minutes after the addition of colchicine (10(-5), 10(-4), and 10(-3) mol/L). In the baseline state, active tension (AT) developed by papillary muscles from the WKY group was greater than for SHR-NF and SHR-F groups (WKY 5.69+/-1.47 g/mm(2) [mean+/-SD], SHR-NF 3.41+/-1.05, SHR-F 2.87+/-0.26; SHR-NF and SHR-F P<0.05 versus WKY rats). The passive stiffness was greater in SHR-F than in the WKY and SHR-NF groups (central segment exponential stiffness constant, K-cs: SHR-F 70+/-25, SHR-NF 44+/-17, WKY 41+/-13 [mean+/-SD]; SHR-F P<0.05 versus; SHR-NF and WKY rats). AT did not improve after 10, 20, and 30 minutes of exposure to colchicine (10(-5), 10(-4), and 10(-3) mol/L) in any group. In the SHR-F group, AT and passive stiffness did not change after 30 to 90 minutes of colchicine exposure (10(-4) mol/L). In summary, the data in this study fail to demonstrate improvement of intrinsic muscle function in SHR with heart failure after colchicine. Thus, in the SHR there is no evidence that colchicine-induced cardiac microtubular depolymerization affects the active or passive properties of hypertrophied or failing left ventricular myocardium.

Changes in the stiffness of demineralized dentin following application of tooth whitening agents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytogenetic characterization of a supernumerary chromosome segment and of B-chromosomes in Astyanax scabripinnis (Teleostei, Characidae)

The chromosome complement of a local population of Astyanax scabripinnis in Brazil was investigated with emphasis on the study of the heterochromatin attached to the A-chromosomes and present in the macro B-chromosome. Analysis after C-banding, silver and CMA(3) staining, incorporation of 5-bromo-2'-deoxyuridine and chromosome digestion with nine restriction endonucleases revealed that the heterochromatin in the B-chromosomes was different from that found in the A-chromosomes. A polymorphism due to the presence of a supernumerary heterochromatic chromosome segment was observed in the population investigated. Some aspects related to the origin of the heterochromatin polymorphism in Astyanax scabripinnis are discussed.

On the larval stages of Macrocoeloma diplacanthum (Decapoda : Brachyura : Majidae), and a review of mithracine phylogenetic aspects

Larval development of Macrocoeloma diplacanthum (Stimpson) consists of two zoeal stages, followed by the megalopa. Each larval stage is described in detail. The duration of the zoeal stages was 2-3 (2.4 +/- 0.5) and 3-4 (3.5 +/- 0.5) days for the first and second zoea, respectively, the megalopa phase appearing 6-8 (7.0 +/- 0.5) days after hatching. Unlike for other majids, zoeal stages of M. diplacanthum can be readily distinguished by their distended forehead with strong underlying muscle bands, undercut dorsal carapace spine, and spine on the terminal endopod segment of the first maxilliped. No other known mithracine or majid zoeae exhibit this combination of features. Our zoeal account of M. diplacanthum from Mexico is remarkably consistent with Floridian specimens previously described. However, we have found some differences between descriptions, which could be attributed to natural variation or inadequate description. Previous attempts to evaluate the relationships within Mithacinae have been based on larval characters widely distributed throughout Majidae and therefore are considered inadequate to infer sister-group relationships. The phylogenetic analysis of majids suggested that the position of Mithracinae is still uncertain, as is its monophyletic status. We recommend that additional characters, particularly of the megalopa phase, be sought for a better resolution of majid evolutionary history.

Larval development of Apiomithrax violaceus (A. Milne Edwards, 1868) (Decapoda : Brachyura : Majoidea : Pisidae) reared in laboratory conditions, and a review of larval characters of Pisidae

Apiomithrax violaceus (A. Milne Edwards, 1868 ) is a pisid majoid crab occurring in tropical and subtropical coastal waters of the eastern and western South Atlantic. Larval development consists of two zoeal stages and a megalopa. Beginning with the first zoea, the duration of each larval stage at 24degreesC was 3-8 (5+/-1), 3-5 (4+/-0.5) and 9-15 (11+/-2) days, the megalopa and first crab instar appearing 9-11 (10+/-1) and 20-27 (23+/-2) days after hatching, respectively. Larval characters agree with those proposed for the Majoidea, in having nine or more setae on the scaphognathite in the first zoea and well-developed pleopods in the second zoea. However, larvae of A . violaceus do not fit larval pisid features. Zoeal stages differ from most other Pisidae in having lateral spines, a long rostral spine extending beyond the antenna, two spines per telson fork and a dorsolateral process on the third abdominal somite. The megalopa differs in having a spine dorsally on the carapace and on the basial segment of the second pereiopod. Two characters that are potentially unique to Apiomithrax include a zoeal antenna with an exopod that is much longer than the protopod, and a rostral spine that is longer than the dorsal spine. These characters should facilitate the identification of this taxon and could also be useful for phylogenetic studies. A review of larvae of 28 species among 14 genera indicated that there is no apparent single larval character that differentiates the Pisidae, with more limited phylogenetic analyses suggesting that this is a paraphyletic group. Apiomithrax , Eurynolambrus , Pisoides , Rochinia and Scyra have the most divergent morphological characters within the family. The analysis and inclusion of additional taxa is likely to shed more light on the sister-group relationships of the Pisidae. However, based on the extent of morphological interspecific variability of known larvae it is likely that the group, as presently defined by adult morphology, is not monophyletic.

Population biology of spine shrimp Exhippolysmata oplophoroides (Holthuis) (Caridea, Hippolytidae) in a subtropical region, São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Terapia manual no tratamento da espondilólise e espondilolistese: revisão de literatura

A espondilólise é um defeito na pars interarticularis da vértebra com descontinuidade óssea do segmento intervertebral; a progressão do defeito resulta em deslizamento de uma vértebra sobre a outra, chamado espondilolistese, o que pode provocar dor. O tratamento não-cirúrgico é a escolha inicial na maioria dos casos de espondilolistese, mas poucos estudos verificam a eficácia dos tratamentos conservadores. O objetivo deste estudo foi realizar uma revisão da literatura sobre esses tratamentos, sobretudo no que concerne à terapia manual, a fim de ajudar os terapeutas na prescrição de intervenções eficazes. Os resultados mostram que tanto a terapia manual como a fisioterapia convencional apresentam efeitos benéficos na redução da dor lombar e na melhora funcional do paciente. As terapias manuais envolvem manipulação da coluna vertebral e articulação sacroilíaca, músculo-energia e alongamento dos músculos afetados. Exercícios de estabilização lombopélvica, fortalecimento dos músculos posturais e alongamento dos isquiotibiais e psoas também foram considerados importantes. O paciente deve ser avaliado individualmente em seu quadro clínico e radiográfico para determinação do plano de tratamento. Dentre as opções conservadoras de tratamento encontradas, nenhuma se mostrou conclusivamente superior às outras e todas podem ser incluídas no tratamento sintomático de pacientes com espondilólise/listese.

A and B mode ultrasonography in preoperative evaluation of lens and posterior segment of dogs eyes with cataract

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rotor support stiffness estimation by sensitivity analysis

In the present work, a method for rotor support stiffness estimation via a model updating process using the sensitivity analysis is presented. This method consists in using the eigenvalues sensitivity analysis, relating to the rotor support stiffnesses variation to perform the adjustment of the model based on the minimization of the difference between eigenvalues of reference and eigenvalues obtained via mathematical model from previously adopted support bearing stiffness values. The mathematical model is developed by the finite element method and the method of adjustment should converge employing an iterative process. The performance and robustness of the method have been analyzed through a numerical example.