Effect of soccer training on the running speed and the blood lactate concentration at the lactate minimum test

Tegtbur et al. [23] devised a new method able to estimate the intensity at maximal lactate steady state termed lactate minimum test. According to Billat et al. [7], no studies have yet been published on the affect of training on highest blood lactate concentration that can be maintained over time without continual blood lactate accumulation. Therefore, the aim of the present study was to verify the effect of soccer training on the running speed and the blood lactate concentration (BLC) at the lactate minimum test (Lac(min)). Thirteen Brazilian male professional soccer players, all members of the same team playing at National level, volunteered for this study. Measurements were carried out before (pre) and after (post) eight weeks of soccer training. The Lac(min) test was adapted to the procedures reported by Tegtbur et al. [23]. The running speed at the Lac(min) test was taken when the gradient of the line was zero. Differences in running speed and blood lactate concentration at the Lac(min) test before (pre) and after (post) the training program were evaluated by Student's paired t-test. The training program increased the running speed at the Lac(min) test (14.94 +/- 0.21 vs. 15.44 +/- 0.42* km(.)h(-1)) and the blood lactate concentration (5.11 +/- 2.31 vs. 6.93 +/- 1.33* mmol(.)L(-1)). The enhance in the blood lactate concentration may be explained by an increase in the lactate/H+ transport capacity of human skeletal muscle verified by other authors.

Genetic associations between flight speed and growth traits in Nellore cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Relationship Between Speed and Time in Running

The purpose of this study was to evaluate the effect of using different mathematical models to describe the relationship between treadmill running speed and time to exhaustion. All models generated a value for an aerobic parameter (critical speed; S(critical)). 35 university students performed 5-7 constant-speed 0%-slope treadmill tests at speeds that elicited exhaustion in similar to 3 min to similar to 10 min. Speed and time data were fitted using 3 models: (1) a 2-parameter hyperbolic model; (2) a 3-parameter hyperbolic model; and (3) a hybrid 3-parameter hyperbolic + exponential model. The 2-parameter model generated values for S(critical) (mean (+/- SD): 186 +/- 33 m.min(-1)) and anaerobic distance capacity (ADC; 251 +/- 122 m) with a high level of statistical certainty (i.e., with small SEEs). The 3-parameter models generated parameter estimates that were unrealistic in magnitude and/or associated with large SEEs and little statistical certainty. Therefore, it was concluded that, for the range of exercise durations used in the present study, the 2-parameter model is preferred because it provides a parsimonious description of the relationship between velocity and time to fatigue, and it produces parameters of known physiological significance, with excellent confidence.

Critical speed and endurance capacity in young swimmers: Effects of gender and age

This study analyzed the relationship between critical speed (CS) and maximal speed for 30 min (S30) in swimmers of ages 10-15 years. Fifty-one swimmers were divided by chronological age (10-12 years = G10-12, 13-15 years = G13-15), sexual maturation (pubic hair stages; P1-P3 and P4-P5), and gender (M = boys, F = girls). The CS was determined through the slope of the linear regression between the distances (100, 200, and 400 m) and participants' respective times. CS and S30 were similar in the younger (G10-12M = 0.97 vs. 0.97 m/s, and G10-12F = 1.01 vs. 0.97 m/s, respectively), and older swimmers (G13-15M = 1.10 vs. 1.07 m/s and G13-15F = 0.93 vs. 0.91 m/s, respectively). In conclusion, the CS can be used in young swimmers for the evaluation of aerobic capacity, independent of gender and age. © 2005 Human Kinetics, Inc.

Effects of gender on stroke rates, critical speed and velocity of a 30-min swim in young swimmers

Our objective was to analyze the effect of gender on the relationship between stroke rates corresponding to critical speed (SRCS) and maximal speed of 30 min (SRS30) in young swimmers. Twenty two males (GM1) (Age = 15.4 ± 2.1 yr., Body mass = 63.7 ± 12.9 kg, Stature = 1.73 ± 0.09 m) and fourteen female (GF) swimmers (Age = 15.1 ± 1.6 yr., Body mass = 58.3 ± 8.8 kg, Stature = 1.65 ± 0.06 m) were studied. A subset of males (GM2) was matched to the GF by their velocity for a 30 min swim (S30). The critical speed (CS) was determined through the slope of the linear regression line between the distances (200 and 400 m) and participant's respective times. CS was significantly higher than S30 in males (GM1 - 1.25 and 1.16 and GM2 - 1.21 and 1.12 m·s-1) and females (GF - 1.15 and 1.11 m·s-1). There was no significant difference between SRCS and SRS30 in males (GM1 - 34.16 and 32.32 and GM2 - 34.67 and 32.46 cycle·s-1, respectively) and females (GF - 34.18 and 33.67 cycle·s-1-1, respectively). There was a significant correlation between CS and S30 (GM1 - r = 0.89, GF - r = 0.94 and GM2 - r = 0.90) and between SRCS and SRS30 (GM1 - r = 0.89, GF - r = 0.80 and GM2 - r = 0.88). Thus, the relationship between SRCS and SRS30 is not influenced by gender, in swimmers with similar and different aerobic capacity levels. ©Journal of Sports Science and Medicine (2007).

Comparison of the lactate minimum speed and the maximal lactate steady state to determine aerobic capacity in purebred Arabian horses

AIM: To compare five different protocols for estimating the lactate minimum speed (LMS) with that for estimating the maximal lactate steady state (MLSS) in Arabian horses, in order to obtain a more rapid method for monitoring aerobic capacity and prescribing training schedules. METHODS: Eight purebred Arabian horses were conditioned to exercise on a treadmill for 12 days then submitted to three to five exercise sessions to determine the MLSS. Blood samples were collected from a jugular catheter at specific intervals for measurement of lactate concentrations. The MLSS was the velocity maintained during the last 20 minutes of constant submaximal exercise, at which the concentration of lactate increased by no more than 1.0 mmol/L. The LMS test protocols (P1 - P5) included a warm-up period followed by a high-intensity gallop. The speed was then reduced to 4 m/s, and the incremental portion of the test was initiated. In P1, P2, and P3, the velocity increment was 0.5 m/s, and the duration of each incremental stage was three, five and seven minutes, respectively. In P4 and P5, the velocity increments were 1.0 and 1.5 m/s, respectively, and the duration of the stages was fixed at five minutes each. A second-degree polynomial function was fitted to the lactate-velocity curve, and the velocity corresponding to the lowest concentration of lactate was the LMS. RESULTS: Only the mean LMS determined by P1 and P2 did not differ from the velocity determined by the MLSS test (p > 0.1). There was a strong correlation (r >0.6) between P1 and the MLSS velocity. A limits of agreement plot revealed that the best agreement occurred between the MLSS test and P1 (mean bias = 0.14 m/s), followed by P2 (bias = -0.22 m/s). The lactate concentrations associated with the various LMS protocols did not differ. CONCLUSIONS: This study shows the variation between protocols of the LMS test for determining the onset of blood lactate accumulation but also reveals that, at least for Arabian horses, the P1 protocol of the LMS has good agreement with the MLSS. © 2013 Copyright New Zealand Veterinary Association.

Tractor perfomance as a function of speed and seeder s tire inflation pressure

O desempenho de tratores agrícolas em condições de campo resulta da interação entre pneu e rodado, influenciado pela velocidade de deslocamento. O objetivo deste trabalho foi avaliar o desempenho de um trator agrícola sob diferentes pressões de inflação dos pneus da semeadora (518, 483, and 414kPa) e em duas marchas que proporcionaram velocidades de 3,0 e 6,0km h-1. O experimento foi realizado no campus de Jaboticabal da Universidade Estadual Paulista (UNESP). O delineamento experimental utilizado foi fatorial inteiramente casualizado (3x2), com quatro repetições. A força de tração foi influenciada pela marcha e pela potência exigida; no entanto, a pressão de inflação do pneu da semeadora não alterou esses parâmetros. Além disso, o consumo de combustível foi influenciado apenas pela marcha do trator. O consumo de energia foi maior com o aumento da velocidade, ocasionada pela mudança de marcha. A velocidade de deslocamento foi maior para a pressão de 518kPa, em razão da menor patinagem da semeadora promovida por essa pressão. A patinagem do trator não foi alterada pelos fatores testados.

Increase of gastric area and weight gain in rats submitted to the ingestion of gasified water

OBJETIVO: em virtude do aumento progressivo da utilização de bebidas gaseificadas e do ganho de peso na população brasileira, e sabendo-se que os refrigerantes têm no gás carbônico um fator em comum, planejou-se um estudo experimental em ratos para investigar os efeitos da água gaseificada na ingestão hídrica e alimentar, ganho de peso, área gástrica, glicemia, hematócrito e hemoglobina. MÉTODOS: Foram constituídos 4 grupos de 12 ratos acompanhados por 36 dias. Ao Grupo-1 foi oferecido 35 g/dia de ração ad libitum e 20 ml de água não gaseificada em 4 períodos diários, ao Grupo-2 foi oferecido 35 g/dia de ração ad libitum e 20 ml de água gaseificada em 4 períodos diários, ao Grupo-3 foi oferecido 10 g/dia de ração ad libitum e 20 ml de água não gaseificada em 4 períodos diários e ao Grupo-4 foi oferecido 10 g/dia de ração ad libitum e 20 ml de água gaseificada em 4 períodos diários. RESULTADOS: Os resultados identificaram que os animais que foram submetidos ao tratamento com água gaseificada (Grupo-2 e Grupo-4), apresentaram um maior volume de ingestão hídrica e aumento significativo da área gástrica (p<0,001), no Grupo-2 a ingestão alimentar assim como o ganho de peso foi significativo (p<0,01), os dados de glicemia, hematócrito e hemoglobina não tiveram alterações significativas entre os grupos estudados. CONCLUSÃO: Nas condições em que foi realizado este experimento, concluímos que a água gaseificada favoreceu a ingestão hídrica e alimentar, o ganho de peso e o aumento da área gástrica.

Pulpal temperature increases with Er : YAG laser and high-speed handpieces

Statement of problem. During tooth preparation, both high-speed handpieces and lasers generate heat, which, if not controlled, can cause pulpal necrosis.Purpose. The aim of this study was to compare temperature increases produced by a high-speed dental handpiece with those produced by a relatively new instrument, the Er:YAG (erbium: yttrium-aluminum-garnet) laser.Material and methods. Thirty bovine mandibular incisors were reduced to an enamel/dentin thickness of 2.5 mm. Class V preparations were completed to a depth of 2.0 mm, measured with a caliper or by a mark oil the burs. A thermocouple was placed inside the pulp chamber to determine temperature increases (degreesC). Analysis was performed on the following groups (n = 10): Group 1, high-speed handpiece without water cooling, Group 11, high-speed handpiece with water cooling (30 mL/min), and Group III, the noncontact Er:YAG laser (2.94 mum at 350 mJ/10 Hz) with water cooling (4.5 mL/min). The temperature increases were recorded by a computer linked to the thermocouples. The data were analyzed using the Kruskal-Wallis test. The Dunn multiple comparison test was used as post hoc test (alpha = .05).Results. The average temperature rises were: 11.64degreesC (+/-4.35) for Group 1, 0.96degreesC (+/-0.71) for Group 11, and 2.69degreesC (+/-1.12) for Group III. There were no statistical differences between Groups 11 and III, both 11 and III differed from Group I significantly (P = .000 and P = .002, respectively).Conclusion. The preparations made with the high-speed and the laser instrument generated similar heat increases under water cooling. Water cooling was essential to avoid destructive temperature increases when using both the high-speed handpiece and laser.

Flavonoid increase in soybean as a response to Nezara viridula injury and its effect on insect-feeding preference

The ability of the stink bug (Nezara viridula) to induce and/or increase production of chemical defenses, i.e., flavonoids, in immature seeds of five genotypes of soybean (BR-16, IAC-100, PI 227687, PI 229358, and PI 274454) was investigated under greenhouse and laboratory conditions. Samples from pods of each genotype damaged by stink bug were analyzed for flavonoid content with high performance liquid chromatography. A dual-choice test was conducted to evaluate the feeding preference of N. viridula comparing BR-16 pods treated with extracts of PI 227687 seeds (with and without stink-bug injury), with water-treated pods. Seeds of PI 227687 damaged by N. viridula presented the highest concentration (352 mug/g) of daidzin (4'-hydroxyisoflavone-7-glucoside). The same trend was observed with genistin (4',5,7-trihydroxyisoflavone-7-glucoside): PI 227687 contained 142.4 mug/g, PI 274454, 31.6 mug/g, and PI 229358, 38.9 mug/g. Seeds damaged by stink bugs had higher isoflavone contents (daidzin and genistin), compared to controls. However, after being damaged, PI 274454 and PI 229358 produced less genistin than the other genotypes and no differences in concentration between damaged and nondamaged plants of this genotypes were observed. The numbers of observations of the insect feeding and the numbers of stylet sheaths left in water-treated BR-16 pods were greater than in those treated with PI 227687 extracts. The insects fed for longer periods on BR-16 pods treated with extract of PI 227687 without injury compared to those that were treated with extract of PI 227687 previously injured by stink bugs. Extracts of PI 227687 pods ( damaged or not) were deterrent to adults of N. viridula, and insect injury increased concentrations of daidzin and genistin in PI 227687 seeds. The deterrence seemed to be more pronounced after pods had suffered stink-bug injury.

Influence of the tool edge geometry on specific cutting energy at high-speed cutting

This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN coated carbides with seven different geometries of chip breaker were applied on dry tests. A special milling tool holder with only one cutting edge was developed and the machining forces needed to calculate the specific cutting energy were recorded using a piezoelectric 4-component dynamometer. Workpiece roughness and chip formation process were also evaluated. The results showed that the specific cutting energy decreased 15.5% when cutting speed was increased up to 700%. An increase of 1 °in tool chip breaker chamfer angle lead to a reduction in the specific cutting energy about 13.7% and 28.6% when machining at HSC and conventional cutting speed respectively. Furthermore the workpiece roughness values evaluated in all test conditions were very low, closer to those of typical grinding operations (∼0.20 μm). Probable adiabatic shear occurred on chip segmentation at HSC Copyright © 2007 by ABCM.

Brazilian soccer players and no-players adolescents: effect of the maturity status on the physical capacity components performance

The aim of this study was to compare the speed and the agility between Brazilian soccer players and non-players, regarding maturity status in adolescents 11-15 years old. Forty and two soccer players (age – 159.30±17.28 months old; weight – 48.45±9.96 kg; height – 1.53±0.10 m) and 45 non-players (age – 162.62±24.92 months old; weight – 48.30±8.35 kg; height – 1.54±0.12 m) participated of this study. Participants were classified by maturity status. On 2 different days with 1 week of differences between the assessments the participants were evaluated the agility, by Shuttle Run test, and the speed, by 30 m maximum speed test. The results showed that the maturity status was an influential factor in the performance with better results for individuals in a more advanced stage. The soccer practice does not seem to interfere in the performance of the physical capacity components analyzed, only effective when different maturity levels are involved in the analysis. It is also possible that late maturing boys selectively drop-out of soccer as age and sport specialization increase.

Allelopathic potential of Equisetum giganteum L. and Nephrolepis exaltata L. on germination and growth of cucumber and lettuce

Nephrolepis exaltata L. Schott "Bostoniensis" family Davalliaceae and Equisetum giganteum L. family Equisetaceae, Phylum Pteridophyta, exhibit a strong mechanism of dominance in the areas in which they live. Have secondary compounds with allelopathic activity. The objective of this article was evaluate allelopathic potential of two ferns species, using bioassay applying aqueous extracts of dried fronds, in cucumber and lettuce seeds, and observing germination and initial development. To observe the influence on germination was analyze the percentage of germinated seeds and germination speed index (GSI). To observe initial development was analyzed shoot and root growth of the seedlings. The bioassays revealed that no concentration significantly inhibited the germination, but germination speed was delayed gradually in two species tested, as increased the extract concentration. In initial development, all the extracts showed a tendency to inhibit the growth, and an increase in extract concentration decreasing growth of radicle and hypocotyl axis. We conclude that the aqueous extract has inhibitory activity more pronounced in early development than in seed germination, affecting the primary structures of the tested plants, corroborating with the observations of occurrences of the species in natural places where dominate and suppress the growth of other species.

Purification and biological effects of a C-type lectin isolated from Bothrops moojeni

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)