Investigação de técnicas para o acompanhamento do desgaste de um par engrenado utilizando tribologia e análise da resposta dinâmica processada via função densidade probabilidade Beta

Pós-graduação em Engenharia Mecânica - FEIS

A mechatronic system applied to wear particle analysis

This paper describes the development of a mechatronic system for a predictive maintenance grounded on wear particle analysis. The reckoning of wear particles containing in lubricating industrial oils brings the image acquisition system into being. The ISO 4406:1999 standard is a guide to establish the counting and evaluation processes of particles. The system applied to the acquisition and analysis of the data consists of a digital camera, a monocular microscope and an oil filtering system. A computational program was developed with the application of Visual Microsoft C++ in a way to detain the oil sample image from the microscope slide to the computer screen. Quantitative analyses of the wear debris particles bulk are exploited applying a graphical interface that was developed to render the image processing of the sample test. The implemented system has a reachable cost thus it can be applied for schooling goals and for bolstering laboratories of minor industries and medium size companies.

Influência das propriedades petrográficas na qualidade do polimento de rochas ornamentais

Pós-graduação em Geologia Regional - IGCE

Influência da velocidade de deslizamento no desgaste do par tribológico ferro fundido cinzento (MC 12 e MC 13) - ferro fundido cinzento centrifugado

Pós-graduação em Engenharia Mecânica - FEG

Manutenção preditiva de motores de combustão interna, à gasolina, através da técnica de análise de lubrificantes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manutenção de redutores de velocidade pela integração das técnicas preditivas de análise de vibrações e análise de óleo lubrificante

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização de materiais utilizados na fabricação de cilindros de laminação submetidos ao desgaste abrasivo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do comportamento ao desgaste de compósitos poliméricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um sistema de análise de imagem para quantificação do tamanho e distribuição de partículas de desgaste

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de pastilhas cerâmicas à bases de Si3N4 para aplicações tribológicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um tribômetro, tipo cilindro sob disco, para ensaios tribológicos em formulações com óleos vegetais

Pós-graduação em Engenharia Mecânica - FEIS

Desenvolvimento de um equipamento para análise de desgastes em prótese de articulação total de quadril

Pós-graduação em Engenharia Mecânica - FEG

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Avaliação de lubrificantes para aplicação em componentes mecânicos pelo método de compressão do anel

The current lubricants are getting better with advancing technology and more specific to each case of application. Its use is directly linked to the level of waste by friction generated between objects in direct contact and it is essential to promote greater durability of mechanical components. This study refers to behavioral assessment of some types of lubricants and rank among them which one presents the lowest friction between metal components. For this work, will be used the method of ring compression test (RCT), after performed tests and analyzed the results, will be possible to report which lubricant will bring the best reduction in friction. The need for this work was given initially by the observation that some mechanical projects developed at FEG does not conduct in-depth studies the lubricants used. Therefore this study aims to provide better support to these projects. In this work were used five different lubricants, three oils and two greases.