Foundry sand recycling in the troughs of blast furnaces: a technical note

The foundry sand agglomerated with alkaline phenolic resin, used for the manufacture of molds, was found to be a residue which is able to be recycled, minimizing the costs of disposal and the environmental impact. This paper analyzes the thermomechanical regeneration and leaching processes and also assesses the influence of additives on the improvement of the mechanical properties of the sands. Besides, the industrial experiments carried out at CSN aiming at the foundry sand recycling in the covering of the blast furnace troughs are presented. (C) 2003 Elsevier B.V. All rights reserved.

Antimicrobial resistance and species composition of Enterococcus spp. isolated from waters and sands of marine recreational beaches in Southeastern Brazil

Density, species composition and antimicrobial resistance in bacteria of the Enterococcus genus were evaluated in seawater and sands from 2 marine recreational beaches with different levels of pollution. The 2 beaches showed predominance of Enterococcus faecalis and Enterococcus faecium, in the water and the sand. Dry sand presented higher densities of Enterococcus sp. and higher frequency of resistant strains than wet sand and seawater. The beach with a higher degree of pollution presented higher percentages of resistant strains (66.7% and 61.5%, in sand and in water, respectively) and resistance to a larger number of antimicrobials compared with the less polluted beach, Ilha Porchat (35.7% and 31.25% of resistant strains in sand and water, respectively). in water samples, the highest frequencies of resistance were obtained against streptomycin (38.5%) and erythromycin (25%), whilst in sand, the highest frequencies were observed in relation to erythromycin and tetracycline (38.1% and 14.3%, respectively). These results show that water and sands from beaches with high indexes of faecal contamination of human origin may be potential sources of contamination by pathogens and contribute to the dissemination of bacterial resistance. (C) 2007 Elsevier Ltd. All rights reserved.

Effects of Silicon and Drought Stress on Tuber Yield and Leaf Biochemical Characteristics in Potato

Silicon has beneficial effects on many crops, mainly under biotic and abiotic stresses. Silicon can affect biochemical, physiological, and photosynthetic processes and, consequently, alleviates drought stress. However, the effects of Si on potato (Solanum tuberosum L.) plants under drought stress are still unknown. The objective of this study was to evaluate the effect of Si supply on some biochemical characteristics and yield of potato tubers, either exposed or not exposed to drought stress. The experiment was conducted in pots containing 50 dm(3) of a Typic Acrortox soil (33% clay, 4% silt, and 63% sand). The treatments consisted of the absence or presence of Si application (0 and 284.4 mg dm(-3)), through soil amelioration with dolomitic lime and Ca and Mg silicate, and in the absence or presence of water deficit (-0.020 MPa and -0.050 MPa soil water potential, respectively), with eight replications. Silicon application and water deficit resulted in the greatest Si concentration in potato leaves. Proline concentrations increased under lower water availability and higher Si availability in the soil, which indicates that Si may be associated with plant osmotic adjustment. Water deficit and Si application decreased total sugars and soluble proteins concentrations in the leaves. Silicon application reduced stalk lodging and increased mean tuber weight and, consequently, tuber yield, especially in the absence of water stress.

Solar energy budgets in central Amazonian ecosystems: a comparison between natural forest and bare soil areas

In order to estimate the deforestation consequences on the actual solar energy budget of the Central Amazon Region, two ecosystems of different characteristics were compared. The present conditions of the region were represented by a typical 'terra firme' forest cover located at INPA's Ducke Forest Reserve, where the measurements necessary to evaluate its solar energy balance were carried out. The second ecosystem, simulating a deforested area, was represented by an area about 1.0 ha without natural vegetation and situated in the same Reserve. In this area lysimeters were placed, two of them filled with yellow latosol and two others with quartzose sand soil. Both soils are representative soils in the region. Their water balances were taken into account as well as the other parameters necessary to compute the solar energy balances. The results showed that water loss by evaporation was about 41.8% of the total precipitation in the yellow latosol lysimeters and about 26.4% for the quartzose sand ones. For the forest cover it was estimated an evapotranspiration of 67.9% of the rainfall amount. In relation to solar energy balance calculated for the forest cover, it was found that 83.1% of the total energy incoming to this ecosystem was used by the evapotranspiration process, while the remaining of 16.9% can be taken as sensible heat. For bare soils, 55.1% and 31.8% of the total energy were used as latent heat by yellow latosol and quartzose sand soils, respectively. So, the remaining amounts of 44.9% and 68.2% were related to sensible heat and available to atmospheric air heating of these ecosystems. Such results suggest that a large deforestation of the Amazon Region would have direct consequences on their water and solar radiation balances, with an expected change on the actual climatic conditions of the region. © 1993.

Densities and antimicrobial resistance of Escherichia coli isolated from marine waters and beach sands

Bacterial resistance is a rising problem all over the world. Many studies have showed that beach sands can contain higher concentration of microorganisms and represent a risk to public health. This paper aims to evaluate the densities and resistance to antimicrobials of Escherichia coli strains, isolated from seawater and samples. The hypothesis is that microorganisms show higher densities in contaminated beach sands and more antimicrobial resistance than the water column. Density, distribution, and antimicrobial resistance of bacteria E. coli were evaluate in seawater and sands from two recreational beaches with different levels of pollution. At the beach with higher degree of pollution (Gonzaguinha), water samples presented the highest densities of E. coli; however, higher frequency of resistant strains was observe in wet sand (71.9 %). Resistance to a larger number of antimicrobial groups was observe in water (betalactamics, aminoglycosides, macrolides, rifampicins, and tetracyclines) and sand (betagalactamics and aminoglycosids). In water samples, highest frequencies of resistance were obtain against ampicilin (22.5 %), streptomycin (15.0 %), and rifampicin (15.0 %), while in sand, the highest frequencies were observe in relation to ampicilin (36.25 %) and streptomycin (23.52 %). At the less polluted beach, Ilha Porchat, highest densities of E. coli and higher frequency of resistance were obtain in wet and dry sand (53.7 and 53.8 %, respectively) compared to water (50 %). Antimicrobial resistance in strains isolated from water and sand only occurred against betalactamics (ampicilin and amoxicilin plus clavulanic acid). The frequency and variability of bacterial resistance to antimicrobials in marine recreational waters and sands were related to the degree of fecal contamination in this environment. These results show that water and sands from beaches with a high index of fecal contamination of human origin may be potential sources of contamination by pathogens and contribute to the dissemination of bacterial resistance.

Attraction of the sand fly Nyssomyia neivai (Diptera: Psychodidae) to chemical compounds in a wind tunnel

Background: Similar to other hematophagous insects, male and female sand flies must feed on plants to obtain sugar and, subsequently, energy to complete their life cycles. A large number of compounds emitted by plants may act as volatile signals to these insects. Primary alcohols have been detected in some plants, but in small amounts. In a previous report, the attractiveness of saturated primary alcohols with 7 to 9 carbons was evaluated for Lutzomyia longipalpis, the vector of American visceral leishmaniasis, with positive results.Methods: In the present study, a wide range of primary alcohols, 3 to 10 carbons, were tested to investigate their attractiveness to another sand fly species, Nyssomyia neivai, a putative vector of American cutaneous leishmaniasis. The mixture of compounds that induced the best sand fly response was also evaluated.Results: Of the eight compounds evaluated, hexanol and octanol elicited the best attractive responses for sand fly females.Conclusion: Phytochemicals may be an interesting source of search for new sand fly attractants.

Fixação biológica do nitrogênio e crescimento de plantas de leucena (Leucaena leucocephala (Lam.) de wit.) sob salinidade

This study aimed to evaluate the effects of salinity in the growth and nitrogen fixation in leucaena. Plants were cultivated in Leonard pots containing clean and sterilized sand. The treatments were distributed in a completely randomized design, in a 3x3 factorial, with five replicates. The first factor corresponded to no inoculation and inoculation with Bradyrhizobium sp SEMIA 6070 and SEMIA 6153 strains. The second factor corresponded to NaCl concentrations: 0, 25 and 50 mol m(-3). Were analyzed the height and dry matter accumulation, the number of nodules and nitrogen in plants. The inoculation of plants with the strain SEMIA 6070 provided higher growth and greater nitrogen accumulation in plants thar were not subject to salinity. Nodulation was not affected by salinity. Inoculation with SEMIA 6153 strain provided greater tolerance to salinity.

Efeito de Colletotrichum dematium var. truncata e Cercospora kikuchii na germinação de sementes de soja

A antracnose, causada por Colletotrichum dematium var. truncata, é a principal doença da soja que afeta a fase inicial de formação das vagens, podendo causar a morte das plântulas. Cercospora kikuchii é o fungo causador da doença mancha púrpura nas sementes de soja, responsável por severas reduções no rendimento e na qualidade das sementes. O objetivo deste trabalho foi determinar o tempo mais apropriado para infecção das sementes de soja por C. dematium var. truncata e C. kikuchii, para posterior avaliação dos danos causados pelo fungo na germinação. Tais fungos foram cultivados em meio BDA. As sementes de soja cultivar MSOY 6101 foram colocadas sobre meio contendo o patógeno C. dematium var. truncata por 0 (testemunha), 4, 16, 24, 32 e 40h. As sementes da cv. CD 208 foram inoculadas com C. kikuchii pelos mesmos períodos citados, com adição de 48 e 56h. Após os respectivos tempos de contato, as sementes foram submetidas ao teste de sanidade (papel de filtro), com duas variações, sem e com assepsia superficial (hipoclorito de sódio 1% por três minutos). Determinado o tempo mais adequado de infecção, outras sementes foram infectadas pelo patógeno e, posteriormente, foram realizados testes de germinação em papel e areia com uma mistura de sementes sadias (colocadas sobre o meio BDA) e sementes inoculadas, resultando em lotes com 0, 20, 40, 60, 80 e 100% de sementes infectadas. O tempo de incubação de 40 e 56 horas para C. dematium var truncata e C. Kikuchii, respectivamente são suficientes para obtenção da totalidade das sementes infectadas. C. Kikuchii não prejudica a germinação das sementes.

Seletividade de imazapic às soqueiras de cana-de-açúcar (Saccharum spp.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temperatura e substrato para a germinação de sementes de Piptadenia moniliformis Benth.

In germination tests, substrate and ideal temperature are important for providing favorable conditions for the germination of seeds and the eventual development of seedlings. This research aimed at evaluating the effects of temperature and substrate on the germination of Piptadenia moniliformis Benth seeds. Two trials were done. In the first, seeds were submitted to germination under constant temperatures of 5 to 40 degrees C (increases of 5 degrees C) and alternated temperatures of 20-25, 25-30, 30-35, 20-30, 25-35 and 20-35 degrees C on paper. In the second trial, temperatures of 25, 20-30 e 20-35 degrees C were used in the substrates on (OP) and between paper (BP), on (OS) and between sand (BS), on (0V) and between vermiculite (BV) and paper roll (PR). The following traits were evaluated: percentage of seeds with protrusion of primary root and normal seedlings; speed germination index; length of primary root and of the hypocotyls and the dry mass of seedlings. A completely randomized design was used with 14 treatments. In the first experiment and a factorial scheme of 7 x 3 (7 substrates and 3 temperatures) was used in the second with four replicates of 25 seeds each. In the first experiment the constant temperatures of 25 e 30 degrees C and the alternated of 20-30 e 20-35 degrees C provided best results for the germination of seeds. In the second, the temperature of 25 C associated with the substrates BP, BS and BV surpassed the other treatments proving adequate for carrying out the germination tests of Piptadenia moniliformis Benth seeds.

Adição de areia para dispersão de solos na análise granulométrica

A acurácia da análise granulométrica depende da obtenção de suspensões de solo completamente dispersas e estáveis para possibilitar a separação das suas frações granulométricas. O objetivo do presente trabalho foi avaliar a eficácia da adição de quantidades e tamanhos de grãos de areia na fase de dispersão da análise granulométrica de solos, visando à maior acurácia na obtenção dos resultados da análise granulométrica. Os solos utilizados foram: Latossolo Vermelho eutroférrico (LVef), LatossoloVermelho acriférrico (LVwf), Latossolo Vermelho eutrófico (LVe), Argissolo Vermelho-Amarelo eutrófico (PVAe) e Nitossolo Vermelho eutroférrico (NVef). A dispersão das amostras dos solos foi realizada por meio da adição de hidróxido de sódio e agitação rotativa (60 rpm) por 16 h. O delineamento experimental adotado foi o inteiramente casualizado, com esquema fatorial 6 x 2, com três repetições. Os tratamentos foram constituídos por seis quantidades (0, 5, 10, 15, 20 e 25 g) e dois diâmetros (2,0-1,0 e 1,0-0,5 mm) de areia, adicionados na fase de dispersão da análise granulométrica dos solos. de acordo com as equações ajustadas, a adição de areia com diâmetro entre 1,0 e 0,5 mm nas quantidades de 21,4 g para LVef, 19,6 g para LVwf e 25,8 g para NVef proporciona, respectivamente para esses solos, aumentos de 50, 38 e 14,5 % nos teores de argila. No LVe e no PVAe não se justifica a adição de areia na análise granulométrica, pois esses solos não apresentaram problemas de dispersão. Os resultados demonstram que a adição de 25 g de areia, com diâmetro entre 1,0 e 0,5 mm, na fase de dispersão da análise granulométrica de solos argilosos com altos teores de óxidos de Fe e com dificuldades de dispersão, é eficiente para promover efetiva dispersão das partículas primárias do solo.

Esterco bovino e calagem para formação de mudas de guanandi

O objetivo deste trabalho foi avaliar, em casa de vegetação, os efeitos de doses de esterco bovino e de calcário na formação de mudas de guanandi (Calophyllum brasiliense Cambèss.). Foram avaliadas quatro doses de cada fator, combinadas em esquema fatorial 4x4. O delineamento experimental foi inteiramente ao acaso com quatro repetições, e cada parcela continha cinco mudas. O substrato foi formado pela mistura, em volume, de oito partes de subsolo e duas partes de areia, e doses de esterco correspondentes a 0, 2, 4 e 6 partes que, em massa, equivalem a 0, 101, 175 e 229 kg m-3. As doses de calcário foram calculadas para elevar a saturação por bases (V%) a 20, 35, 50 e 65%. Aos 120 dias, foram avaliados: altura, diâmetro do colo, número de folhas, área foliar e matéria seca das partes aérea e radicular das mudas. em substrato constituído de subsolo+areia, a calagem e a adubação com esterco bovino não são necessárias para produção de mudas de guanandi.

Análise multivariada e variabilidade espacial na estimativa da erodibilidade de um argissolo vermelho-amarelo

A erodibilidade é um fator de extrema importância na caracterização da perda de solo, representando os processos que regulam a infiltração de água e sua resistência à desagregação e o transporte de partículas. Assim, por meio da análise de dependência espacial dos componentes principais da erodibilidade (fator K), objetivou-se estimar a erodibilidade do solo em uma área de nascentes da microbacia do Córrego do Tijuco, Monte Alto-SP, e analisar a variabilidade espacial das variáveis granulométricas do solo ao longo do relevo. A erodibilidade média da área foi considerada alta, e a análise de agrupamento k-means apontou para uma formação de cinco grupos: no primeiro, os altos teores de areia grossa (AG) e média (AM) condicionaram sua distribuição nas áreas planas; o segundo, caracterizado pelo alto teor de areia fina (AF), distribui-se nos declives mais convexos; o terceiro, com altos teores de silte e areia muito fina (AMF), concentrou-se nos maiores declives e concavidades; o quarto, com maior teor de argila, seguiu as zonas de escoamento de água; e o quinto, com alto teor de matéria orgânica (MO) e areia grossa (AG), distribui-se nas proximidades da zona urbana. A análise de componentes principais (ACP) mostrou quatro componentes com 87,4 % das informações, sendo o primeiro componente principal (CP1) discriminado pelo transporte seletivo de partículas principalmente em zonas pontuais de maior declividade e acúmulo de sedimentos; o segundo (CP2), discriminado pela baixa coesão entre as partículas, mostra acúmulo da areia fina nas áreas de menor cota em toda a área de concentração de água; o terceiro (CP3), discriminado pela maior agregação do solo, concentra-se principalmente nas bases de grandes declives; e o quarto (CP4), discriminado pela areia muito fina, distribui-se ao longo das declividades nas maiores altitudes. Os resultados sugerem o comportamento granulométrico do solo, que se mostra suscetível ao processo erosivo devido às condições texturais superficiais e à movimentação do relevo.

EFFECT of DIFFERENT AIRBORNE-PARTICLE ABRASION/BONDING AGENT COMBINATIONS on THE BOND STRENGTH of A RESIN CEMENT TO A BASE METAL ALLOY

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversidade e ocorrência de peixes na área de influência da UHE Mogi Guaçu e lagoas marginais, bacia do alto rio Paraná, São Paulo, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)