Composition of stingless bee honey: Setting quality standards

Compositional data from 152 stingless bee (Meliponini) honey samples were compiled from studies since 1964, and evaluated to propose a quality standard for this product. Since stingless bee honey has a different composition than Apis mellifera honey, some physicochemical parameters are presented according to stingless bee species. The entomological origin of the honey was known for 17 species of Meliponini from Brazil, one from Costa Rica, six from Mexico, 27 from Panama, one from Surinam, two from Trinidad & Tobago, and seven from Venezuela, most from the genus Melipona. The results varied as follows: moisture (19.9-41.9g/100g), pH (3.15-4.66), free acidity (5.9-109.0meq/Kg), ash (0.01-1.18g/100g), diastase activity (0.9-23.0DN), electrical conductivity (0.49-8.77mS/cm), HMF (0.4-78.4mg/Kg), invertase activity (19.8-90.1IU), nitrogen (14.34-144.00mg/100g), reducing sugars (58.0-75.7g/100g) and sucrose (1.1-4.8g/100g). Moisture content of stingless bee honey is generally higher than the 20% maximum established for A. mellifera honey. Guidelines for further contributions would help make the physicochemical database of meliponine honey more objective, in order to use such data to set quality standards. Pollen analysis should be directed towards the recognition of unifloral honeys produced by stingless bees, in order to obtain standard products from botanical species. A honey quality control campaign directed to both stingless beekeepers and stingless bee honey hunters is needed, as is harmonization of analytical methods. © 2007 Asociación Interciencia.

The variability and predictors of quality of AIDS care services in Brazil

Background: Since establishing universal free access to antiretroviral therapy in 1996, the Brazilian Health System has increased the number of centers providing HIV/AIDS outpatient care from 33 to 540. There had been no formal monitoring of the quality of these services until a survey of 336 AIDS health centers across 7 Brazilian states was undertaken in 2002. Managers of the services were asked to assess their clinics according to parameters of service inputs and service delivery processes. This report analyzes the survey results and identifies predictors of the overall quality of service delivery.Methods: The survey involved completion of a multiple-choice questionnaire comprising 107 parameters of service inputs and processes of delivering care, with responses assessed according to their likely impact on service quality using a 3-point scale. K-means clustering was used to group these services according to their scored responses. Logistic regression analysis was performed to identify predictors of high service quality.Results: The questionnaire was completed by 95.8% (322) of the managers of the sites surveyed. Most sites scored about 50% of the benchmark expectation. K-means clustering analysis identified four quality levels within which services could be grouped: 76 services (24%) were classed as level 1 (best), 53 (16%) as level 2 (medium), 113 (35%) as level 3 (poor), and 80 (25%) as level 4 (very poor). Parameters of service delivery processes were more important than those relating to service inputs for determining the quality classification. Predictors of quality services included larger care sites, specialization for HIV/AIDS, and location within large municipalities.Conclusion: The survey demonstrated highly variable levels of HIV/AIDS service quality across the sites. Many sites were found to have deficiencies in the processes of service delivery processes that could benefit from quality improvement initiatives. These findings could have implications for how HIV/AIDS services are planned in Brazil to achieve quality standards, such as for where service sites should be located, their size and staffing requirements. A set of service delivery indicators has been identified that could be used for routine monitoring of HIV/AIDS service delivery for HIV/AIDS in Brazil (and potentially in other similar settings).

Meat quality of young Nellore bulls with low and high residual feed intake

Fifty-nine Nellore bulls from low and high residual feed intake (RFI) levels were studied with the objective of evaluating meat quality traits. Animals were slaughtered when ultrasound-measured backfat thickness reached 4. mm, and samples of Longissimus were collected. A mixed model including RFI as fixed effect and herd and diet as random effects was used, and least square means were compared by t-test. More efficient animals consumed 0.730. kg dry matter/day less than less efficient animals, with similar performance. No significant differences in carcass weight, prime meat cuts proportion, chemical composition, pH, sarcomere length, or color were observed between RFI groups. Shear force, myofibrillar fragmentation index and soluble collagen content were influenced by RFI, with a higher shear force and soluble collagen content and a lower fragmentation index in low RFI animals. Feedlot-finished low RFI young Nellore bulls more efficiently convert feed into meat, presenting carcasses within quality standards. © 2012 Elsevier Ltd.

Bacteriological quality of irrigation water from vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, SP

This work aimed to assess the bacteriological quality of water used in the irrigation of vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, São Paulo, Brazil. A total of 80 samples of water used in the irrigation of 40 vegetable gardens were analyzed, two samples coming from each vegetable garden. They were collected at the same site in different months, which resulted in two sample collection groups. The most probable number (MPN/100mL) of total coliforms, thermotolerant coliforms and enterococci was identifi ed by means of the multiple tube technique. The analysis of the fi rst group samples showed quantities of thermotolerant coliforms above the amount allowed by current law for irrigation water (CONAMA Resolution n. 357) in nine cases. The owners of those vegetable gardens were then instructed in water disinfection procedures. After the analysis of the second group samples, it was noticed that only one sample did not meet the quality standards, and it was collected at a site where no disinfection procedure had been carried out. According to the results, 77.5% of the vegetable gardens were using water whose samples meet the quality standards. After the owners were instructed with regard to disinfection procedures, that number changed to 97.5%, which confi rms the importance of controlling and supervising irrigation water quality

Condutividade elétrica da solução nutritiva para o cultivo do crisântemo em vaso

Em se tratando do crisântemo de vaso, que constitui relevante contribuição à atividade de plantas ornamentais, ainda há necessidade de uma recomendação consistente sobre a condutividade elétrica (CE) da solução nutritiva para seu cultivo. Nesse sentido, realizou-se um experimento em ambiente protegido, objetivando avaliar o crescimento do crisântemo cv. Miramar cultivado em vaso, em função da CE da solução nutritiva e da lixiviação de sais do substrato. O delineamento experimental foi em blocos casualizados, com quatro repetições; os tratamentos foram distribuídos em esquema fatorial 5 x 2, referentes aos valores de CE da solução nutritiva (2,1; 2,8; 3,5; 4,2; e 4,9 dS m-1), em substrato com e sem lavagem para lixiviação dos sais. O aumento da CE inibiu o crescimento e desempenho vegetativo, mas estimulou o diâmetro da haste. A lixiviação dos sais estimulou, exceto quanto ao diâmetro da haste, o maior crescimento avaliado pelas demais variáveis fitotécnicas. A CE de 2,1 dS m-1 possibilita a produção de crisântemo dentro de padrões qualitativos de comercialização, mediante lixiviação periódica do substrato.

Avaliação física e química da polpa de maracujá congelada comercializada na região de Bauru

A indústria de polpa de maracujá tem como objetivo a obtenção de produtos com características sensoriais e nutricionais próximas da fruta in natura. O objetivo deste trabalho foi avaliar as informações nutricionais das embalagens e as características físico-químicas das polpas de maracujá congeladas. Foram analisadas 25 amostras, de 07 marcas diferentes, adquiridas em supermercados de Bauru-SP, e região. Apenas uma das marcas analisadas (14,3%) encontra-se em acordo com a legislação vigente, sendo que as demais apresentam tabelas ultrapassadas ou incompletas. As características físico-químicas diferem entre as marcas comercializadas, principalmente quanto ao teor de ácido ascórbico, sendo que 64,0% das amostras se encontram em desarcordo com o Regulamento Técnico para Fixação dos Padrões de Identidade e Qualidade (PIQ) para polpa de maracujá do Ministério da Agricultura. As variações observadas entre a polpa in natura e a congelada são menores nos itens: densidade, pH, sólidos solúveis totais, acidez em ácido cítrico e ratio, mas altas quanto ao teor de ácido ascórbico.

Thermoeconomic model considering the environment impacts on thermoelectric power plants: Natural gas versus diesel

In this paper a comparative analysis of the environmental impact caused by the use of natural gas and diesel in thermoelectric power plants utilizing combined cycle is performed. The objective is to apply a thermoeconomical analysis in order to compare the two proposed fuels. In this analysis, a new methodology that incorporates the economical engineering concept to the ecological efficiency once Cardu and Baica [1, 2], which evaluates, in general terms, the environmental impacts caused by CO2, SO2, NOx and Particulate Matter (PM), adopting as reference the air quality standards in vigour is employed. The thermoeconomic model herein proposed utilizes functional diagrams that allow the minimization the Exergetic Manufacturing Cost, which represents the cost of production of electricity incorporating the environmental impact effects to study the performance of the thermoelectric power plant [3,4], It follows that it is possible to determine the environmental impact caused by thermoelectric power plants and, under the ecological standpoint, the use of natural gas as a fuel is the best option compared to the use of the diesel, presenting ecological efficiency values of 0.944 and 0.914 respectively. From the Exergoeconomic point of view of, it was found out that the EMC (Exergetic Manufacturing Cost) is better when natural gas is used as fuel compared to the diesel fuel. Copyright © 2006 by ASME.

Uso de regressão linear para estimar parâmetros físico-químicos relacionados à qualidade do jerked beef

Jerked beef is officially defined as salted, cured and dried beef. Water activity (Aw), moisture, ash and residual nitrite are the physicochemical parameters that define this product identity and quality standards. In this work, the behavior of these parameters during jerked beef processing was evaluated and a significant correlation among them was revealed. These results allowed the establishment of statistical equations that enable the estimation of all the physicochemical parameters from the results obtained in the measurement of just one of them.

A case study of concurrent engineering application on the development of parts for the white goods industry in Brazil

This classical way to manage product development processes for massive production seems to be changing: high pressure for cost reduction, higher quality standards, markets reaching for innovation lead to the necessity of new tools for development control. Into this, and learning from the automotive and aerospace industries factories from other segments are starting to understand and apply manufacturing and assembly oriented projects to ease the task of generate goods and from this obtain at least a part of the expected results. This paper is intended to demonstrate the applicability of the concepts of Concurrent Engineering and DFM/DFA (Design for Manufacturing and Assembly) in the development of products and parts for the White Goods industry in Brazil (major appliances as refrigerators, cookers and washing machines), showing one case concerning the development and releasing of a component. Finally is demonstrated in a short term how was reached a solution that could provide cost savings and reduction on the time to delivery using those techniques.

Infrared thermography applied to the evaluation of metabolic heat loss of chicks fed with different energy densities

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Monitoramento hídrico e determinação de áreas de conflito da sub-bacia do Córrego Saudade, Uberaba-MG

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

As contribuições do design instrucional na elaboração de ambiente de aprendizagem para a TV digital interativa

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Análise isotópica da variabilidade natural do carbono-13 e avaliação energética em néctares de pêssego – Prunus persica (L.) Batsch

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Barreiras e motivações à adoção de práticas de Green Supply Chain Management: estudo de casos no setor de baterias automotivas

Pós-graduação em Engenharia de Produção - FEB

Análise multivariada no monitoramento do processo de produção de óleo diesel numa refinaria de petróleo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)