Produtividade, eficiência agronômica, características nutricionais e tecnológicas do feijão adubado com nitrogênio em plantio direto e convencional

Altas produtividades do feijoeiro são obtidas sob condições tecnológicas adequadas, destacando-se o uso de sistemas de manejos de solo e a adubação nitrogenada, porém, há pouco conhecimento sobre tais técnicas culturais interferindo nas características nutricionais e tecnológicas de grãos. Desse modo, o trabalho teve como objetivo verificar a interferência da adubação nitrogenada em cobertura (0, 40, 80, 120 e 160 kg ha-1 de N) no feijoeiro, cultivar Pérola, cultivado no preparo convencional do solo e no plantio direto e suas relações com a produtividade, eficiência agronômica, características nutricionais e tecnológicas do grão. O delineamento experimental empregado foi o de blocos ao acaso em esquema de parcelas subdivididas, com quatro repetições, onde as parcelas foram constituídas pelos sistemas de manejo de solo e as subparcelas pelas doses de N em cobertura. A produtividade do feijoeiro é influenciada positivamente pela adubação nitrogenada em cobertura, com maior necessidade de fertilizante no plantio direto. A eficiência agronômica é superior no sistema de preparo convencional do solo. O aumento do teor de proteína bruta é em função das doses crescentes de N em cobertura nos sistemas de plantio direto e de preparo convencional do solo. O tempo para cozimento dos grãos é diminuido em função das doses de N empregadas no sistema de plantio direto em relação ao preparo convencional. Há aumento no tempo para a máxima hidratação dos grãos até a aplicação de 120 kg ha-1 de N no sistema de plantio direto e no preparo convencional do solo.

SURFACE MODIFICATION of SUGARCANE BAGASSE CELLULOSE and ITS EFFECT on MECHANICAL and WATER ABSORPTION PROPERTIES of SUGARCANE BAGASSE CELLULOSE HDPE COMPOSITES

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Protein content and electrophoretic profile of fat body and ovary extracts from workers of Melipona quadrifasciata anthidioides (Hymenoptera, Meliponini)

Workers of Melipona quadrifasciata anthidioides (Lepeletier, 1836) develop their ovaries and lay eggs, therefore the production of vitellogenin is expected. In electrophoretic profiles only fat body extracts from nurse workers and ovary extracts from newly-emerged workers show protein with molecular mass similar to vitellogenin. However, an increase in the protein content was detected in forager fat body. This increase was attributed to storage of vitellogenin or other proteins in the previous phase and not discharged into the hemolymph or to an effect of the increased titre of juvenile hormone in this phase of worker life over the fat body functioning.

Morphology and protein content of hepatocytes in type I diabetic rats submitted to physical exercises

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of ball milling on structural and physicochemical characteristics of cassava and Peruvian carrot starches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of ball milling on the physicochemical characteristics of Peruvian carrot and cassava starches

Peruvian carrot and cassava starches were ground in a ball mill for 4, 8, 16, and 32 h and their structural and physicochemical characteristics were determined. Results obtained from HPAEC-PAD, GPC, and amylose content indicated a breaking of hydrogen bounds and α-(1 [RIGHTWARDS ARROW] 6) linkages of the starch molecules after treatment. X-ray diffractograms showed that the milling provided a reduction in the crystalline area of the starch granules. Most of the starch granules displayed agglomeration after 4 h of milling, when observed under a scanning electron microscope, and after 16 h a shapeless mass was observed for Peruvian carrot starch. Solubility and water absorption capacity of the starches increased with an increase in the milling time, while RVA profiles showed a progressive reduction of peak, breakdown, and final viscosities, as well as the development of initial viscosity. Gelatinization temperatures and enthalpies were reduced. Prolonged ball milling accelerated the enthalpy relaxation in both starches. These results confirmed a partial gelatinization of the starches, which was 82.6% for Peruvian carrot and 65.4% for cassava starches after 32 h of milling. The Peruvian carrot starch was more affected by the ball milling because of both its lower amylose content and the defects in its crystalline structure

COMPENSATORY LUNG GROWTH: LUNG PROTEIN,DNA and RNA CONTENTS IN TRILOBECTOMIZED RATS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical characterization of particleboard produced with waste from ethanol and sugar mill

The problem of proper disposal of solid waste generated in different industrial processes is one of worldwide environmental concerns nowadays. Thus, this study aimed to establish a new alternative for the disposal of two agro-industrial residues employing them to produce particleboard for different purposes in building construction. The focus was given to the reuse of the sugarcane bagasse (SB) originated during the processing of Saccharum officinarum for sugar and ethanol production, and bamboo stem leaves of Dendrocalamus giganteus(BB). For this, six particleboards were produced in the following compositions: with 100% SB, 75% SB + 25% BB, 50% SB+50% BB, 40% SB +60 BB, 25% SB+ 75% BB and 100% BB in the total mass of the composites. The particleboards physical characterization followed Brazilian Standard ABNT NBR 14810-3 to density, moisture content and water absorption. Results showed these raw materials are compatible to particleboard production.

Avaliação e caracterização da qualidade da carne de peito (Pectoralis major) de matrizes pesadas em final de ciclo produtivo

Este trabalho teve por objetivo avaliar as características da qualidade da carne de matrizes pesadas de descarte. Para isto, foram coletadas 40 amostras de filés de peito (Pectoralis major) de matrizes da linhagem Ross com 68 e 69 semanas de idade. As coletas foram divididas em duas, com 20 amostras coletadas em cada uma delas. No tempo zero (após o resfriamento) foi medido o pH e coletados fragmentos para a avaliação do valor R. Nos tempos 4 e 24 horas post-mortem, foram feitas as seguintes análises: pH, valor R, cor objetiva, perda por exsudação (drip loss), capacidade de retenção de água (CRA), capacidade de absorção de água (CAA), perdas de peso por cozimento (PPC) e força de cisalhamento (FC). Houve diferença (p < 0,05) para os valores médios de pH entre os tempos zero (após o resfriamento), 4 e 24 horas que foram de 6,49; 5,78; e 5,65, respectivamente. O resultado médio encontrado para CRA foi de 26,45. Para a cor objetiva, os resultados médios para o L*, a* e b* foram de 52,20; 3,64; 0,51, respectivamente. Portanto, conclui-se que, quando observados os resultados das análises para os parâmetros perda por exsudato, perda de peso por cozimento e capacidade de absorção de água, a carne de peito das matrizes pesadas apresenta ótima qualidade tecnológica apesar de apresentar problemas na sua textura.

Medicinal Mushroom Growth as Affected by Non-Axenic Casing Soil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

Thermophysical Properties of Lemon Juice as Affected by Temperature and Water Content

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the proteins in the defatted flour and protein concentrate of baru nuts (Dipteryx alata Vog)

O baru (Dipteryx alata Vog.) é uma leguminosa abundante no Cerrado brasileiro, cuja castanha pode ser explorada através do uso sustentável para o aproveitamento das frações proteicas e lipídicas. Este trabalho teve como objetivo estudar as proteínas desta castanha, presentes na farinha desengordurada e no concentrado proteico, quanto as suas propriedades funcionais, ao perfil das frações proteicas e à digestibilidade in vitro. A farinha desengordurada com hexano foi submetida à extração no pH de maior solubilidade das proteínas, obtendo-se o concentrado proteico. O perfil eletroforético das frações proteicas foi avaliado em gel de SDS-PAGE. As propriedades funcionais indicaram a possibilidade de emprego em diversos alimentos, assim como a soja, conferindo capacidade de absorção de água, capacidade de absorção de óleo, propriedades emulsificantes e espumabilidade. As globulinas, seguidas das albuminas, são as frações majoritárias da farinha e do concentrado proteico, respectivamente. A digestibilidade foi superior no concentrado em relação à farinha desengordurada.

Photosynthetic capacity and water use efficiency in sugarcane genotypes subject to water deficit during early growth phase

The objective of this study was to compare the gas exchange, photosynthetic capacity and water potential of sugarcane genotypes cultivated under water deficit conditions imposed during the initial growth phase. Experiments were performed in a greenhouse using two sugarcane genotypes namely: HoCP93-776 (drought susceptible) and TCP02-4587 (drought tolerant). Sixty days after planting, two different water treatments were applied (i.e., with or without water deficit). At 0,30 and 60 days after the treatment, gas exchange variables were evaluated for their relationship with water use, intrinsic instantaneous water use efficiency and instantaneous carboxylation efficiency. The SPAD index, photosynthetic pigments, water potential and relative water content in the leaves were also analyzed. The genotype HoCP93-776 was more sensitive to drought treatment as indicated by the significantly lower values of SPAD index, photosynthetic pigments, water potential (Ψw) and relative water content (RWC) variables. The genotype TCP02-4587 had higher water potential, stomatal control efficiency, water use efficiency (WUE), intrinsic instantaneous water use efficiency (WUEintr), instantaneous carboxylation efficiency and photosynthetic capacity. The highest air vapor pressure deficit during the drought conditions could be due to the stomatal closing in the HoCP93-776, which contributed to its lower photosynthetic capacity.

Spatial variability of soil water content and mechanical resistance of Brazilian ferralsol

The spatial variability of mechanical resistance to penetration (PR) and gravimetric moisture (GM) was studied at a depth of 0-0.40 m, in a ferralsol cropped with corn, and under conventional tillage in llha Solteira, Brazil (latitude 20 degrees 17'S, and longitude 52 degrees 25'W). The purpose of this study was to analyse and to try explaining the spatial variability of the mentioned soil physical properties using geostatistics. Soil data was collected at points arranged on the nodes of a mesh with 97 points. Geostatistics was used to analyse the spatial variability of PR and GM at four depths: 0-0. 1, 0.1-0.2, 0.2-0.3 and 0.3-0.4 m. PR showed a higher variability of data, with coefficients of variation of 52.39, 30.54, 16.91, and 15.18%, from the surface layers to the deepest layers. The values of the coefficients of variation for GM were lower: 9.99, 5.13, 5.59, and 5.69%. Correlation between GM and PR for the same soil layers was low. Penetration resistance showed spatial structure only in the 0.30-0.40 m layer, while gravimetric moisture showed spatial structure at all depths except for 0-0. 10 m. All the models of fitted semivariograms were spherical and exponential, with ranges of 10-80 m. Data for the variable 'GM' in the 0.20-0.30 and 0.30-0.40 m layers revealed a trend in data attributed to the occurrence of subsurface water flow. (C) 2005 Elsevier B.V. All rights reserved.