Economic analysis of the intercropping of lettuce and tomato in different seasons under protected cultivation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Productivity of cherry tomatoes under protected cultivation carried out with different types of pruning and spacing

The aim of the study was to evaluate production and determine the level of total soluble solids for cherry tomatoes, under protected cultivation carried out with different types of spacing and pruning. The experiment was performed according to a randomized block design in a 2×2 factorial scheme, with two types of spacing between plants and two types of pruning, and with five repetitions. The cultivar 'Sindy' (De Ruiter) was utilized. Each experimental parcel contained seven plants, and fruits were collected from the five central plants. The seedlings were produced in Styrofoam trays of 128 cells and transplanted at 33 days after planting using two types of spacing between plants (0.3 and 0.5 m) and 1 m spacing between rows. The plants were grown as single-or double-stem form and staked individually. The parameters evaluated were the number of fruit per plant, fresh weight of fruit and the level of total soluble solids expressed in °Brix. There was no evidence of significant interaction between the treatments. For fresh weight of fruit per plant, there was a significant effect when the plants were grown with a spacing of 1 × 0.5 m, with 4.12 kg per plant, compared to a production of 3.00 kg per plant with a spacing of 1 × 0.3 m. With regard to the number of fruit per plant, a significant difference was seen between the two types of spacing, where a spacing of 1 × 0.3 m yielded a lower number of fruit per plant (188.8), compared to that observed with a spacing of 1 × 0.5 m (238.1). With regard to the two types of pruning, there was a significant effect for only the number of fruit per plant, where the mean number of fruit was 188.4 with one stem and 238.4 with two stems. No significant difference was observed between the treatments for the level of total soluble solids. It is concluded that for the cultivar 'Sindy', under protected cultivation, production is better with a spacing of 0.5 m between plants and the use of two stems per plant.

Production of four cultivars of iceberg lettuce, under protected cultivation, with and without black polyethylene ground cover

The aim of the work was to evaluate the performance of four cultivars of iceberg lettuce, in a greenhouse, with and without ground cover. The experimental design adopted was that of subdivided parcels, where parcels were provided with and without ground cover consisting of black polyethylene and the subparcels consisted of the cultivars. There were three repetitions per treatment and six central plants of each parcel were evaluated. Drip irrigation was utilized. The cultivars studied were: 'Laurel', 'AF-389', 'Mayara' and 'Tainá'. The seeds were planted in Styrofoam trays with 288 cells containing the substrate Plantmax Hortaliças® A. The trays were kept in a greenhouse until transplanting, 25 days after seeding. The parameters examined were: fresh weight of the aerial part per plant, longitudinal (DL) and transverse (DT) diameters of the head, height of the plant and mean number of leaves per plant. Only among the cultivars there were significant differences in transverse and longitudinal diameters of the head and height of the plant. No significant interactions were detected between ground cover and cultivars. With regard to longitudinal and transverse diameters, 'AF-839' (DL = 27.11 cm; DT = 24.53 cm) showed smaller diameters than those of 'Laurel' (DL = 31.13 cm; DT = 30.55 cm), but did not differ from the other cultivars. In regard to height of the plants, 'Laurel' (20.66 cm) had the greatest value and 'AF-839' (16.02 cm) the lowest. The cultivars did not differ with respect to mean number of leaves and fresh weight of the aerial part of the plant. It is concluded that there were no significant differences in the cultivation of the iceberg lettuce with and without ground cover. The cultivar 'Laurel' stood out with respect to longitudinal and transverse diameters and height of the plant, only differing from the 'AF-839' with regard to the diameters.

Effect of plastic film mulch on the production of butterhead lettuce cultivars under protected cultivation

The study was performed in a greenhouse with the aim of evaluating the production of butterhead lettuce cultivars with and without plastic film mulch in the summer. The cultivars studied were 'Elisa', 'Lídia', 'Herman' and 'Luísa'. The experimental design was a split plot, in which the main plot was plastic film mulch (with or without black polyethylene film) and the subplots were the cultivars, with three repetitions. The seedlings were grown in Styrofoam trays of 288 cells and transplanted 25 days after seeding in a space of 25 × 25 cm. Harvests were carried out 45 days after transplanting and the following variables were determined: fresh and dry weights of the aerial part, number of leaves per plant, plant height and the longitudinal and transverse diameters of the plant. Significant differences were found only among the cultivars for the characteristics studied, with no cover × cultivar interaction. Fresh weight of the aerial part of 'Lídia' (270.9 g) was greater than that of 'Herman' (142.5 g), but did not differ from those of 'Luísa' (229.8 g) or 'Elisa' (204.8). The dry weight of the aerial part of 'Lídia' (12.4 g) differed statistically only with respect to that of 'Herman' (7.9 g). The cultivars 'Luísa' and 'Elisa' had an aerial part dry weight of 11.4 and 11.2 g, respectively. The number of leaves per plant of the cultivars 'Luísa' (45.1) and 'Elisa' (43.0) was higher than for 'Herman' (24.05), but did not differ from that of the cultivar 'Lídia' (39.5). The mean transverse and longitudinal diameters, as well as the mean height of the plants, showed that 'Lídia', 'Elisa' and 'Luísa' had the greatest values. The cultivars 'Lídia', 'Elisa' and 'Luísa' were the most productive and plastic film mulch had no effect on lettuce production under protected cultivation.

Response of rootstocks to stem canker and the production and quality of melon under protected cultivation

Two tests were performed. In the first, resistance to Didymella bryoniae was determined for the following genotypes: the pumpkins 'Ikky', 'Agroceres', 'Kirameki' and 'Shelper', watermelon progenies 1a, 2a, 3a, 5a, 1b, 2b, 3b and 5b, and 'Gherkin' (C. anguria). The plants were inoculated with the fungus during transplanting. The evaluations of the test were performed every 15 d according to a scoring scale adopted by Dusi et al. (1994). The second test examined compatibility among the rootstocks x grafts, and their effects on production. The rootstocks, 5 pumpkins including 'Ikky', 'Agroceres', 'Kirameki', 'Shelper', six watermelon progenies 1a, 2a, 5a, 1b, 2b and 5b, and one 'Gherkin', were planted one week before planting of the grafted 'Bônus No. 2' melon. The experiments were carried out with 12 treatments, including the control ('Bônus No. 2') with 3 replications with 14 grafted plants per each replication. For the first test, the first three evaluations (at 15, 30 and 45 d after inoculation) did not show characteristic lesions of stem canker, but progeny 3b was found to be susceptible in evaluations performed at 60 and 75 d after inoculation. Progeny 3a demonstrated intermediate susceptibility, while progenies 1a, 2a, 5a, 1b, 2b and 5b, the pumpkins 'Kirameki', 'Shelper', 'Ikky' and 'Agroceres', and 'Gherkin', showed resistance to Didymella bryoniae. In the second test, watermelon progenies 1a, 5a, 1b and 2b, and the pumpkins 'Kirameki', 'Shelper', 'Ikky' and 'Agroceres' showed a level of grafting success of 100%, while results with progenies 2a and 5b, and 'Gherkin' were different in grafting success, respectively 91.67, 98.33 and 43.33%. For other fruit parameters, weight, longitudinal and transverse diameters, pulp thickness and level of total soluble solids, there were no differences among the treatments.

Production and quality of melons grown in two different substrates under soilless cultivation

This investigation was conducted at UNESP, Jaboticabal campus, São Paulo, Brazil, from March 8 to June 21, 1999, to evaluate net melon yield and fruit quality, using soilless culture. 'Bônus 2' and 'Mission' cultivars were grown in a substrate of ground quartz or thick sand, in a randomized block experimental design. Leaf and stem dry matter production, leaf size and soluble solids content of the fruit, of 'Bônus 2' were superior to 'Mission'. There was a significant interaction for the evaluated characteristics of fruit dry mass production and yield. The largest accumulation of fruit dry mass and yield of the 'Bônus 2' cultivar (61,325 kg/ha) was observed when a substrate of ground quartz was used, while the yield for the 'Mission' cultivar was higher in a substrate of thick sand (42,125 kg/ha).

Híbridos experimentais de melão rendilhado cultivados em solo e substrato

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade, adaptabilidade e estabilidade fenotípica de cultivares de tomateiro sob diferentes condições de ambiente

O objetivo deste trabalho foi estudar o desempenho produtivo, adaptabilidade e estabilidade fenotípica de seis genótipos de tomateiro na região de Marília, SP. Os experimentos foram conduzidos em nove ambientes (seis sob condições de cultivo protegido e três sob condições de céu aberto), com seis genótipos (Carmen, Diva, Donador, Graziela, Vita e HE-295), em blocos casualizados, com quatro repetições. Ocorreram diferenças significativas entre ambientes, e a média geral dos cultivos protegidos superou a dos cultivos a céu aberto quanto à produtividade, apesar de a média geral dos cultivos a céu aberto ser superior quanto ao peso médio de frutos. As cultivares, à exceção de HE-295, demonstraram alta estabilidade, merecendo destaque as cultivares Carmen, Donador e Vita, que tiveram rendimento médio superior ao da média geral, adaptabilidade geral e comportamento previsível em todos os ambientes estudados. Quanto ao peso médio dos frutos, as cultivares Diva e Vita foram as únicas que mostraram ampla adaptabilidade a todos os ambientes, comportamento previsível, além de apresentarem peso médio do fruto superior ao da média geral.

Produção de minitubérculos básicos de batata em três sistemas hidropônicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade de tomate tipo cereja cultivado em ambiente protegido e em diferentes substratos

O experimento foi realizado em Jaboticabal-SP, sob ambiente protegido, objetivando avaliar quatro substratos (Rendimax-Estufa®, areia, solo coberto com filme de polietileno preto e solo descoberto) e quatro híbridos de tomateiro tipo cereja ('Mascot', 'Gisela', 'Cheri' e 'Sweet Million'), sendo os substratos comercial e areia acondicionados em sacos plásticos. O delineamento experimental foi em blocos casualizados, em esquema fatorial 4 x 4, com quatro repetições. Utilizou-se irrigação por gotejamento, sendo a dotação hídrica realizada em função dos dados obtidos em um tanque Classe A. A solução nutritiva utilizada foi a recomendada por Castellane & Araújo (1995) para a cultura do tomateiro. Os frutos foram colhidos semanalmente, durante o período de 24/11/2000 a 24/01/2001, sendo avaliados o número e produtividade diária de frutos. Os cultivos em solo proporcionaram maior produção diária que no substrato comercial e em areia, para os híbridos Gisele e 'Mascot'. O híbrido 'Gisela' mostrou-se mais produtivo nos cultivos em solo, enquanto o híbrido 'Cheri', embora tenha proporcionado menores produções em peso, produziu maior número de frutos por planta. A produtividade dos tratamentos mais produtivos foi satisfatória, estando de acordo com os padrões de produção para a cultura no Brasil.

Performance of four tomato cultivars, with and without ground cover

The aim of the study was to evaluate the production of four tomato cultivars of determinate growth, in the field, with and without ground cover. The cultivars examined were: 'AP-533', 'AP-529', 'Hypeel 5131 and 'PS-41816', which were cultivated with a spacing of 1 m between rows and 0.4 m between plants. The experimental design utilized was that of subdivided parcels, where parcels were provided with and without a ground cover of black polyethylene, and subparcels consisted of the cultivars; eight repetitions were used. The eight central plants in the parcel were evaluated according to the following characteristics: fresh weight of fruit per plant and number of fruit per plant, separated by size. For the classification of fruit, the same plants were divided into classes based on the diameter of the fruit. The diameter size was as follows: class 1, 3 cm; class II, 4 cm; class III, 4.5 cm; and class IV, 5.5 cm. The results showed that there were no significant differences in production among the cultivars studied. Cultivars 'AP-533' and 'Hypeel 513' demonstrated greater production per plant, when ground cover was used, yielding 1474 and 1404 g/plant, respectively. When black polyethylene ground cover was not used, these cultivars produced 1258 and 1271 g of fruit per plant, respectively. The cultivars 'AP-529' and 'PS41818' showed a greater yield of fruit when cultivated without ground cover, with 1548 and 1663 g/plant, respectively. The cultivar 'Hypeel 513' had the highest percentage of fruit with the largest dimensions. An interaction was appeared between 'AP-529' and ground cover, where the production of this cultivar was lower with black polyethylene ground cover compared to bare ground. It is concluded that there are no significant differences in the cultivation of the tomato hybrids 'AP-533', 'Hypeel 513' and 'PS-41816' with and without ground cover, but that the cultivar 'AP-529' should be planted preferentially in soil without black polyethylene cover.

Interação entre alface e tomateiro consorciados em ambiente protegido, em diferentes épocas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção e qualidade de melão rendilhado sob diferentes substratos em cultivo protegido

This paper aimed to evaluate the performance of hybrids of muskmelon on different substrates. Five substrates were evaluated: S(1) = coconut husk fiber, S(2) = sand; S(3) = 1/2 sand and 1/2 crushed of sugarcane, S(4) = 1/2 sand and 1/2 of peanut shell, and S(5) = 1/3 sand, 1/3 of crushed sugarcane and I of peanut shell and four hybrids of muskmelon (Bonus N(o). 2, Louis, Fantasy Jab and 2007 # 16). The plants were cultivated in plastic pots of 13 dm(3), which were filled with these substrates; they were arranged in plants spacing of 1,0 x 0,5 m between plants. The Fertirrigation was done by dripping, using a nutrient solution for the culture. The experimental design was a randomized blocks, in a 5 X 4 factorial design with four replications. The characteristics evaluated were: total production, average transverse and longitudinal diameter of fruit, fruit shape index; mesocarp thickness; average transverse and longitudinal diameter of the locule; index format locule; mass of fresh fruit; soluble solids, pH; titratable acidity; C vitamin; firmness of flesh; tracery of shell; and maturation index. The optimal substrate for muskmelon cultivation is a combination of 50% sand + 50% peanut shell. The hybrid Fantasy performed better compared to other hybrids.

Cultivo de híbridos de pimentão amarelo em fibra da casca de coco

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção do híbrido Momotaro de tomateiro, em função da enxertia e do estádio das mudas no plantio

O experimento desenvolveu-se em ambiente protegido, de outubro de 1997 a julho de 1998, na Fazenda São Manuel da UNESP, Campus de Botucatu. O solo no local foi classificado como Latossolo Vermelho Amarelo fase arenosa. O tomateiro, híbrido Momotaro T-93, foi cultivado em pé franco e sobre dois porta-enxertos (híbridos Anchor T e Kaguemusha), com objetivo de determinar o desenvolvimento da muda para o transplante, no estádio de 5 a 6 folhas definitivas, de plena floração e de início da frutificação. O delineamento experimental foi o de blocos ao acaso, em esquema fatorial de 3 x 3, num total de 9 tratamentos e 4 repetições. Foram avaliados o peso médio, diâmetro e produção total em kg por planta de frutos. O estádio de desenvolvimento de mudas de pé franco, transplantadas com 5 a 6 folhas definitivas, apresentou as melhores médias para produção, diâmetro e peso médio de frutos. Para mudas enxertadas não houve diferença na produtividade e qualidade final, do estádio de desenvolvimento de 5 a 6 folhas definitivas até o estádio de plena floração, sendo os melhores desempenhos obtidos pelo porta-enxerto 'Anchor T'.