A pesquisa brasileira em educação musical infantil: tendências teórico-metodológicas e perspectivas

Pós-graduação em Música - IA

A inserção e o impacto internacional da pesquisa brasileira em 'estudos métricos': uma análise na base Scopus

This research aims at analyzing the Brazilian scientific contribution on “metric studies” in the mainstream science through journals indexed in the Scopus basis, intending to visualize its insertion and international impact in the area. Mainly, to diachronically study the researches, the most productive authors and the scientific support network generated among them, as well as to identify the journals in which such production has been disseminated. It is based upon the three main target groups of current bibliometrics, as in Glänzel’s perspective (2003), and upon the impact of Brazilian researches in the international community through the citations received. Were found 263 articles and tables concerning the diachronical study and the highlighted researchers and journals were constructed analyzing the insertion in the target groups, the number of articles, number of citations and the average of citations. As results, researchers from the Federal Universities of Rio de Janeiro and São Paulo have stood out. All the researchers permeate the application of metric studies to several scientific areas, with emphasis on the health and biological sciences. The least contemplated researches were the ones whose objective was to develop and to discuss the bibliometrics as methodology, contributing to its on conceptual-theoreticalmethodological development, as well as those focusing on contributing, assessing and guiding scientific policies. We conclude by suggesting scientific and academic policies which motivate the researchers to publish in journals indexed in international bases in order to internationalize Brazilian science.

O que sabemos sobre a pesquisa brasileira voltada à educação em museus de ciências?

Over the past four decades it occurred a great expansion of science education research in Brazil (TEIXEIRA, 2008). Considering the scientific production in the area, descriptive studies, called state of the art are necessary, but little found in Brazilian scientific literature, especially in the field of science education. In this context, this paper identifies and describes the main features and trends of Brazilian research in the field of education in science museums, released in the form of dissertations and thesis, in the period 1970 to 2010. It is a qualitative and quantitative research, which performs a document analysis, in a bibliographical review. We mapped 153 academic researches, mainly in the Rio-São Paulo axis, mostly in the last decade, showing that the area can be characterized as an emerging field in science education.

Indicadores cientométricos normalizados: um estudo na produção científica brasileira internacional (1996 a 2011)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rigitano: nova cultivar de umezeiro para porta-enxerto de pessegueiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da fotopolimerização e da cor da resina composta na microdureza

Objective: To study the influence of color opacity and light-curing systems (halogen light vs blue LED) on the microhardness of a composite resin. Methods: Esthet-X composite resin (Dentsply), shades A2 and A2-O, was inserted in a stainless steel matrix (5 mm diameter and 2 mm deep) and was light cured for 40 seconds with a halogen light source (XL 3000; 3M/ESPE) or a blue LED (Optilight LD II; Gnatus). Eight groups of 15 specimens each were formed, and were further divided according to the light-curing systems, the exposed area (base and surface), and the opacity of the composite resin, producing 120 specimens. The specimens were next stored in distilled water for 24 hours, embedded in a chemically activated acrylic resin, then subjected to finishing and polishing with sandpaper and felt discs. Microhardness was measured with a Vickers Digital Microhardness meter, with a 50 g load for 30 seconds. The obtained microhardness means were analyzed by ANOVA and Tukey's multiple-comparison test at 5% significance level. Results: The surface microhardness was always greater than the base microhardness, regardless of the light-curing source. The halogen light lamp produced significantly higher composite resin microhardness means than the blue LED (57.61 vs. 42.53 HV) (p<0.05). Statistically significant differences (p<0.05) were obtained between the microhardness means for the different composite opacities; lowest microhardness in depth was produced by the A2-O shade. Conclusion: Composite resin opacity as well as the light-curing system influenced the microhardness of the material.

A ótica do usuário na avaliação da qualidade do programa de atenção odontológica à gestante

Objective: To evaluate the pregnant women's perception of the FOA-UNESP's Pregnant Women Dental Care Program (Araraquara, SP, Brazil). Method: The sample included 75 pregnant women and used a questionnaire with 16 closed questions, containing variables grouped in the following categories: the didactic-psychological meetings, clinical treatment, professional's profile, clinical facility, fear/confidence in the treatment, and learning. Except for the variables fear/confidence in the treatment and learning, to which 'yes' or 'no' answers were attributed, the remaining variables were attributed answers varying from weak to excellent. The questionnaire pretested in a pilot-study and applied after informed consent was obtained from all pregnant women treated between 2005 and 2006. Results: Most women rated as excellent the information addressed during the didactic-psychological meetings (81.1%), the clinical treatment (90.6%), the professional as to personal appearance, kindness and attention (88.7%, 96.2% and 90.6%, respectively), and the clinical facility as to cleanness, ventilation and comfort (92.5%, 86.8% and 90.6%, respectively). Most of them stated to feel confident (96.2%) and have no fear (86.8%) during the treatment and also affirmed having learned new information in the didactic-psychological meetings of the program (92.5%). Conclusion: The services and actions developed in the program have reached successful outcomes, providing health to the pregnant women and their forthcoming babies.

Razões para substituição de restaurações em clínica integrada

Objective: To analyze the reasons for replacing amalgam and composite resin restorations of patients treated at the Integrated Clinic Discipline of the Dental School of Araçatuba (UNESP), SP, Brazil. Method: After examining the patients for data collection to obtain a diagnosis, the treatment plan was outlined using a clinical form containing the restorations to be replaced, the reasons for replacing, the restorative material of choice and the number of restored surfaces. Next, all restorations indicated for replacement were examined as to their real need of replacement by 5 calibrated examiners taking into account the theorical concepts on the proposed criteria for the need of replacing or not. The analyzed period comprised 5 years (2001 to 2005). The criteria adopted for replacement were attached to the data collecting form in order to standardize the analysis of the restorations. Results: 856 patients were treated within the studied period and 753 needed restoration replacement. The main reasons for replacing amalgam restorations were defective marginal adaptation (40.9%), recurent caries (24.1%) and deficient anatomical form (15.4%). The main reasons for replacing resin restorations were esthetics (31.4%), defective marginal adaptation (29.2%) and recurent caries (20.7%). Conclusion: In spite of the little clinical experience of the studied population (undergraduate students), the reasons for replacing restorations were in accordance with the literature, having estehtics as the main reason for the replacement of composite resin restorations and defective marginal adaptation for amalgam restorations.

Educação em saúde: Efeito de um método de auto-instruçáo sobre os níveis de higiene oral em escolares

Objective: To identify the effect of a self-instructive method (comic strip), applied with distinct approaches and evaluated over two periods, on the oral health of schoolchildren. Method: The sample comprised 2nd year elementary schoolchildren chosen randomly and divided into four groups: a control group (G1) which received no material, a reading group (G2), which was given the comic strip and read it in the classroom, a discussion group (G3), who received the comic strip, which was read out loud in the classroom and discussed, and a complete group (G4), which received the comic strip and which, after reading it, was asked to rewrite the story. O'Leary's plaque index was used as an evaluation instrument, measured immediately prior to application of the program and again 30 days later. The plaque index measured after and 30 days was compared, in each group, using the Wilcoxon test. The plaque index of the diferents groups was compared using the Kruskal-Walis test, in two moments diferents. The significance level was 5%. Results: The results of the evaluation revealed a statistically significant reduction (p<0.05) of the plaque index presented between the two periods in the four groups studied here. However, this reduction was considerably greater in the discussion and complete groups. Conclusion: The use of the self-instruction method associated with work on its content, as occurred in the discussion and complete groups, led to a better understanding of the subject matter, resulting in a higher reduction of plaque indices.

Limpeza do forame e extrusão apical de raspas de dentina em dentes unirradiculares submetidos ao procedimento de patência apical

Objective: To verify the cleaning of the apical foramen and apical extrusion of dentin chips in single-rooted teeth instrumented with two techniques, one of which including the apical patency procedure. Method: Thirty teeth were internally stained with Indian ink, divided in two groups, of which only group I was subjected to apical patency. The dentin chips extruded through the apical foramen were collected in a glass receptacle and quantified. The apical foramen region was divided in quadrants and analyzed with a stereomicroscope to verify the action of the instrument on the cemental canal walls. The teeth were scored 0 4 according to the number of clean walls (without Indian ink), 0 corresponding to no clean wall. Results: In group I, there was no dentin plug, but only 1 tooth was scored 4. In group II, 10 teeth presented dentin plug and all of them were scored 0. There was no statistically significant difference between groups I and II regarding the extruded dentin mass (Scheffé test; p<0.05). Conclusion: The use of the apical patency procedure in single-rooted teeth does not modify the amount of dentin chips extruded through the apical foramen, does not produce an adequate cleaning of the cemental canal walls, but remove the plug of dentin chips from the cemental canal.

Avaliação das condutas de biossegurança em laboratórios de prótese dentária de João Pessoa, PB, Brasil

Objective: To evaluate the biosecurity measures adopted in dental prosthesis laboratories of the city of João Pessoa, PB, Brazil with respect to prosthetic works sent by dentists. Method: Twenty-five dental prosthesis technicians (DPT) of the city of João Pessoa, PB, filled out a questionnaire referring to their knowledge of the biosecurity principles, disinfection of impressions and other prosthetic items, and the use of individual protection equipment (IPE). Results: Although 92% of the interviewees believed in the possible occurrence of cross-infection between dental prosthesis laboratories and dental offices, 64% declared that the prosthetic works received in their laboratories do not undergo any disinfection procedure. It was also observed that, for disinfection of impressions and stone casts, the chemical substances are not used as recommended by the manufacturers or are innocuous to microorganisms. Regarding the use of IPE, 60% of the DPT used mask, but only 4% used gowns. With respect to the measures taken regarding the impressions received from dental offices, 56% of the interviewees only wash them in running tap water, and 56% of the stone casts that arrive at the laboratory are not disinfected in any way. Conclusion: There is a need for more motivation and instructions to DPT regarding the prevention of cross-contamination during sending and receiving of prosthetic works between dental prosthesis laboratories and dental offices because the DPT evaluated in this study were found negligent with respect to disinfection procedures.

Associação entre condição periodontal de gestantes e variáveis maternas e de assistência à saúde

Objective: To evaluate the periodontal condition of pregnant women and to analyze the influence of maternal variables - socioeconomic-demographic data, health, deleterious habits and access to dental service - and the existence of the Family Health Program (FHP) at the public assistance services to pregnant women. Method: This evaluation was part of a cohort study with pregnant women and children conducted in two cities of the São Paulo State, one of which with an implemented FHP. Oral examinations were done using the Community Periodontal and Periodontal Attachment Loss Indexes, and semi-structured interviews with the pregnant women at their homes. Data were analyzed statistically by the chi-square test and Fisher's exact test at 5% significance level (α=0.05). Results: All pregnant women (n=119) registered at the public health service of each city were examined. The mean age was 24.7 years; 61.4% were black or black/white mixed-race women; most (65.5%) earned 2-3 minimum wages, and only 6.7% initiated higher education. Only 8% of the patients presented periodontal health. Bleeding and calculus were observed in 66% of them, and shallow and deep periodontal pockets in 20%. Periodontal attachment loss > 4 mm was observed in 24% of the pregnant women. The group was homogeneous as to the maternal characteristics, age (p=0.0384) and smoking (p=0.0102) being the only factors associated with periodontal disease. The existence of a FHP at the public assistance service was not associated with a lower prevalence of the disease. Conclusion: The findings of this study show a high prevalence of periodontal alterations during pregnancy, with no influence from the existence of a FHP on the observed conditions. Among the risk variables, age and smoking were the factors associated with the presence of periodontal disease. There is a need for a better planing and accomplishment of oral health actions during the prenatal period.

Conhecimento Odontológico e Comportamento de Retorno de Escolares em Função do Tipo de Instituição (Pública ou Privada)

Objective: To evaluate the dental knowledge and attendance of elementary schoolchildren according to the type of institution (public or private). Method: The sample was composed of 800 children from the 5th to 8th grades of the elementary education. The research instrument was a questionnaire composed of open questions referring to the last recall visit, type and importance of the recall visit, and knowledge of dental caries and periodontal disease. Descriptive statistical analysis was done and the chisquared test was used with a significance level of 5%. Results: There was statistically significant difference between the students from the different institutions regarding the time (p=0.001) and main reason (p=0.001) of the last visit to the dentist, knowledge of the need of periodic visits to the dentist (p=0.001), importance (p=0.001) and frequency (p=0.001) of periodic recalls, and knowledge of dental caries (p=0.001) and periodontal disease (p=0.001). Conclusion: The adolescents presented different dental knowledge and attendance, according to the type of teaching institution.

Avaliação de Diferentes Compósitos na Resistência à Fratura de Núcleos de Preenchimento

Objective: To evaluate and compare the fracture strength of different composite resins used for core buildup. Method: Thirty-six bovine teeth were decoronated at the cervical third to standardize the length of specimens at 20 mm. Under constant irrigation, the canals were prepared with #5 Largo drills corresponding to the size and diameter of #3 Reforpost fiberglass post. The posts were cemented with Enforce resin sealer, being 16 mm inside the root canal and 4 mm outside the root canal, and the material was light-activated for 30 seconds at each side. The specimens were divided into 3 groups (n=12), in which cores (4 mm diameter and 5 mm high) were prepared from a prefabricated standard with three types of composite resins: Group 1: Z100 (3M), Group 2: Z250 (3M) and Group 3: P60 (3M). The specimens were fixed in a cylindrical device with an adaptor at 45o inclination. This device was adapted to a universal testing machine (EMIC) to simulate the force until fracture of the specimen. Data were subjected to ANOVA (p<0.05). Results: The Z250 resin cores presented the highest mean fracture strength (45.453 kgf), while the mean fracture strengths in Group 1 and Group 3 were 38.014 and 39.506 kgf, respectively. P60 caused the largest number of root fractures. Conclusion: Considering the characteristics and properties of the tested resins, Z250 appears as the most indicated for core buildup.

Avaliação das dimensões transversas na maxila e mandíbula em pacientes na fase da dentição mista tratados com aparelho ortodôntico removível superior

Objeti vo: Avaliar os efeitos da expansão lenta na maxila e na mandíbula com o aparelho ortodônti co removível superior com torno de expansão simétrico e mediano, nas regiões oclusal, gengival e alveolar de pacientes jovens com atresia maxilar. Método: A amostra compreendeu 18 indivíduos leucodermas (11 meninas e 7 meninos; idade média: 8 anos e 10 meses no início do tratamento) que apresentavam atresia da maxila, acompanhadas ou não de mordida cruzada posterior uni ou bilateral na fase de denti ção mista. Todos os pacientes foram tratados com aparelho ortodônti co removível superior com torno de expansão simétrico e mediano, sendo o tempo médio de tratamento de 15,4 meses (± 7,6). Para avaliar a infl uência do tratamento nas mensurações dos pontos demarcados nas regiões oclusal, gengival e alveolar, foram uti lizados os modelos de gesso dos arcos superior e inferior (36 pares) obti dos em dois tempos: T1: início do tratamento e T2: ao fi nal do tratamento. Para cada paciente em ambos os tempos, foram mensuradas as distâncias transversas na região oclusal entre caninos decíduos, 1o molares decíduos ou 1o pré-molares permanentes e entre 1o molares permanentes, superiores e inferiores. Para verifi car se a movimentação ocorreu por inclinação ou por movimento de corpo, foram uti lizadas também medidas nas regiões gengival e alveolar. Os dados foram avaliados estati sti camente pelo teste “t student para amostras pareadas (5%). Resultados: Observou-se que em T2, todas as distâncias mensuradas para as regiões oclusal, gengival e alveolar apresentaram valores estati sti camente superiores às mesmas medidas em T1 (p<0,05). Conclusão: O aparelho ortodônti co removível superior é efeti vo nos casos de expansão lenta da maxila, agindo também indiretamente nas dimensões transversas do arco inferior.