Heat transfer in fixed bed: a model non-linearity approach

Studies have been carried out on the heat transfer in a packed bed of glass beads percolated by air at moderate flow rates. Rigorous statistic analysis of the experimental data was carried out and the traditional two parameter model was used to represent them. The parameters estimated were the effective radial thermal conductivity, k, and the wall coefficient, h, through the least squares method. The results were evaluated as to the boundary bed inlet temperature, T-o, number of terms of the solution series and number of experimental points used in the estimate. Results indicated that a small difference in T-o was sufficient to promote great modifications in the estimated parameters and in the statistical properties of the model. The use of replicas at points of high parametric information of the model improved the results, although analysis of the residuals has resulted in the rejection of this alternative. In order to evaluate cion-linearity of the model, Bates and Watts (1988) curvature measurements and the Box (1971) biases of the coefficients were calculated. The intrinsic curvatures of the model (IN) tend to be concentrated at low bed heights and those due to parameter effects (PE) are spread all over the bed. The Box biases indicated both parameters as responsible for the curvatures PE, h being somewhat more problematic. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

The Priestley-Taylor parameter α for the Amazon forest

Priestley and Taylor provided a practical formulation of the partitioning of net radiation between heat flux and evaporation contained within a parameter α. Their model (PTM) needs verification under a range of environmental conditions. Micrometeorological data sets collected over the Amazon forest at the Ducke Reserve site (2°57′S; 59°57′W) gave an opportunity to evaluate α. Evidence presented here and by others shows that there is pronounced diurnal variation in α, with minimum values around midday and maximum values in the morning and evening hours. During unstable and stable conditions in the daylight hours, the Bowen ratio (B) varied from 0.10 to 0.57 and -0.71 to -0.08, respectively, whereas α varied from 0.67 to 1.16 and 1.28 to 3.12, respectively. A mean value of α = 1.16±0.56 was obtained from daytime hourly values for two days. The daily data sets from three expeditions gave a mean of α = 1.03±0.13. This work confirms that α is a function of atmospheric stability over the Amazon forest. Thus the PTM should be applied with caution over time-intervals of one day or less because of the sensitivity to variation in α. The calculated values of α are in general agreement with those reported in literature. © 1991.

Relationship Between Speed and Time in Running

The purpose of this study was to evaluate the effect of using different mathematical models to describe the relationship between treadmill running speed and time to exhaustion. All models generated a value for an aerobic parameter (critical speed; S(critical)). 35 university students performed 5-7 constant-speed 0%-slope treadmill tests at speeds that elicited exhaustion in similar to 3 min to similar to 10 min. Speed and time data were fitted using 3 models: (1) a 2-parameter hyperbolic model; (2) a 3-parameter hyperbolic model; and (3) a hybrid 3-parameter hyperbolic + exponential model. The 2-parameter model generated values for S(critical) (mean (+/- SD): 186 +/- 33 m.min(-1)) and anaerobic distance capacity (ADC; 251 +/- 122 m) with a high level of statistical certainty (i.e., with small SEEs). The 3-parameter models generated parameter estimates that were unrealistic in magnitude and/or associated with large SEEs and little statistical certainty. Therefore, it was concluded that, for the range of exercise durations used in the present study, the 2-parameter model is preferred because it provides a parsimonious description of the relationship between velocity and time to fatigue, and it produces parameters of known physiological significance, with excellent confidence.

Estudo da secagem do café cereja despolpado em diferentes tempos de fermentação

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Determinação de parâmetros ópticos de materiais por análise de Kramers-Kronig de espectros de infravermelho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relações entre características de crescimento, de conformação e reprodutivas de animais da raça Canchim visando a proposição de critérios de seleção para fertilidade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quantitative aspects of entanglement in the driven Jaynes-Cummings model

Adopting the framework of the Jaynes-Cummings model with an external quantum field, we obtain exact analytical expressions of the normally ordered moments for any kind of cavity and driving fields. Such analytical results are expressed in the integral form, with their integrands having a commom term that describes the product of the Glauber-Sudarshan quasiprobability distribution functions for each field, and a kernel responsible for the entanglement. Considering a specific initial state of the tripartite system, the normally ordered moments are then applied to investigate not only the squeezing effect and the nonlocal correlation measure based on the total variance of a pair of Einstein-Podolsky-Rosen type operators for continuous variable systems, but also the Shchukin-Vogel criterion. This kind of numerical investigation constitutes the first quantitative characterization of the entanglement properties for the driven Jaynes-Cummings model.

Superspace approach to the renormalization of the O'Raifeartaigh model up to the second order in the linear delta expansion parameter

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Parameter space for a dissipative Fermi-Ulam model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A model for optimal chemical control of leaf area damaged by fungi population - Parameter dependence

We present a model to study a fungi population submitted to chemical control, incorporating the fungicide application directly into the model. From that, we obtain an optimal control strategy that minimizes both the fungicide application (cost) and leaf area damaged by fungi population during the interval between the moment when the disease is detected (t = 0) and the time of harvest (t = t(f)). Initially, the parameters of the model are considered constant. Later, we consider the apparent infection rate depending on the time (and the temperature) and do some simulations to illustrate and to compare with the constant case.

Statistical properties for a dissipative model of relativistic particles in a wave packet: A parameter space investigation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)