The bacterial chromosome segregation protein Spo0J spreads along DNA from parS nucleation sites

Regulation of chromosome inheritance is essential to ensure proper transmission of genetic information. To accomplish accurate genome segregation, cells organize their chromosomes and actively separate them prior to cytokinesis. In Bacillus subtilis the Spo0J protein is required for accurate chromosome segregation and it regulates the developmental switch from vegetative growth to sporulation. Spo0J is a DNA-binding protein that recognizes at least eight identified parS sites located near the origin of replication. As judged by fluorescence microscopy, Spo0J forms discrete foci associated with the oriC region of the chromosome throughout the cell cycle. In an attempt to determine the mechanisms utilized by Spo0J to facilitate productive chromosome segregation, we have investigated the DNA binding activity of Spo0J. In vivo we find Spo0J associates with several kilobases of DNA flanking its specific binding sites (parS) through a parS-dependent nucleation event that promotes lateral spreading of Spo0J along the chromosome. Using purified components we find that Spo0J has the ability to coat non-specific DNA substrates. These 'Spo0J domains' provide large structures near oriC that could potentially demark, organize or localize the origin region of the chromosome.

Methods to estimate the number of surface nucleation sites on glass particles

Based on the Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory, we propose two new models to describe the crystallisation kinetics of glass particles and use them to determine the density of nucleation sites, N(s), on glass powders. We tested these models with sintered compacts of diopside glass particles using sinter-crystallisation treatments at 825 degrees C (T(g)similar to 727 degrees C), that covered from null to almost 100% crystallised volume time fraction. We measured and compared the evolution of the crystallised volume fractions by optical microscopy and x-ray diffraction. Then we fit our expressions to experimental data using Ns and R (the average particle radius) as adjustable parameters. For comparison, we also fit to our data existing expressions that describe the crystallised volume fraction in glass powders. We demonstrate that all the methods allow one to estimate N(s) with reasonable accuracy. For our ground and water washed diopside glass powder, N(s) is between 10(10)-10(11) sites.m(-2). The reasonable agreement between experimental and adjusted R confirms the consistency of all five models tested. However, one of our equations does not require taking into account the change of crystallisation mode from 3-dimensional to 1-dimensional, and this is advantageous.

Contribution of matrix vesicles and alkaline phosphatase to ectopic bone formation

Endochondral calcification involves the participation of matrix vesicles (MVs), but it remains unclear whether calcification ectopically induced by implants of demineralized bone matrix also proceeds via MVs. Ectopic bone formation was induced by implanting rat demineralized diaphyseal bone matrix into the dorsal subcutaneous tissue of Wistar rats and was examined histologically and biochemically. Budding of MVs from chondrocytes was observed to serve as nucleation sites for mineralization during induced ectopic osteogenesis, presenting a diameter with Gaussian distribution with a median of 306 ± 103 nm. While the role of tissue-nonspecific alkaline phosphatase (TNAP) during mineralization involves hydrolysis of inorganic pyrophosphate (PPi), it is unclear how the microenvironment of MV may affect the ability of TNAP to hydrolyze the variety of substrates present at sites of mineralization. We show that the implants contain high levels of TNAP capable of hydrolyzing p-nitrophenylphosphate (pNPP), ATP and PPi. The catalytic properties of glycosyl phosphatidylinositol-anchored, polidocanol-solubilized and phosphatidylinositol-specific phospholipase C-released TNAP were compared using pNPP, ATP and PPi as substrates. While the enzymatic efficiency (k cat/Km) remained comparable between polidocanol-solubilized and membrane-bound TNAP for all three substrates, the k cat/Km for the phosphatidylinositol-specific phospholipase C-solubilized enzyme increased approximately 108-, 56-, and 556-fold for pNPP, ATP and PPi, respectively, compared to the membrane-bound enzyme. Our data are consistent with the involvement of MVs during ectopic calcification and also suggest that the location of TNAP on the membrane of MVs may play a role in determining substrate selectivity in this micro-compartment.

Analytical model for heterogeneous crystallization kinetics of spherical glass particles

An analytical model developed to describe the crystallization kinetics of spherical glass particles has been derived in this work. A continuous phase transition from three-dimensional (3D)-like to 1D-like crystal growth has been considered and a procedure for the quantitative evaluation of the critical time for this 3D-1D transition is proposed. This model also allows straightforward determination of the density of surface nucleation sites on glass powders using differential scanning calorimetry data obtained under different thermal conditions. © 2009 The American Ceramic Society.

Caracterização microestrutural do metal de solda depositado por arco submerso em chapas de aço-carbono estrutural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo do comportamento em fadiga das ligas AA6005, AA6063 e AA6351

Aluminum alloys have shown great potential for the automotive industry, especially aluminum alloys 6xxx series. This category has good mechanical strength and excellent corrosion resistance, important for the areas of construction and transport. The automotive industry has always shown great interest in the study of fatigue behavior, because structural components are subjected to cyclic and vibration loads, generating cracks and fracturing. The mechanical response depends on the material properties, applications, surface condition and microstructure. In this work was study the fatigue behavior of high cycle of machined bodies (not polished) and the effect of roughness on the fatigue life for three aluminum alloys of 6xxx series: AA6005, AA6351 and AA606, all in the T6 condition . S / N curves were made from fatigue tests in rotating bending (R = -1). The influence of roughness was studied by measuring the roughness of each specimen. Was compare the fatigue behavior of polished specimen and not polished specimens. The fractured surfaces of samples were observed by MEV, and it was observed that most of nucleation sites for fatigue crack is initiated below the surface

Quantum Mechanics Insight into the Microwave Nucleation of SrTiO3 Nanospheres

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ecotoxicological assessment of sediments from the Port of Santos and the disposal sites of dredged material

A dragagem dos sedimentos do Canal de Santos é necessária para permitir o trânsito de navios que operam no Porto de Santos. As áreas de disposição do material dragado estão situadas na zona costeira, em frente à Baía de Santos. Este estudo visou avaliar a qualidade dos sedimentos do Canal de Santos e das áreas de disposição atuais e antigas, utilizando testes de toxicidade de sedimento integral com anfípodos e de toxicidade de elutriatos com embriões de ouriço do mar. As amostras do Canal de Santos foram consideradas as mais tóxicas: todas as amostras dessa área foram consideradas significativamente tóxicas. Além disso, algumas amostras das áreas de disposição exibiram toxicidade. Os resultados mostraram, portanto, que os sedimentos apresentam evidências de degradação em sua qualidade, porém novos estudos devem ser conduzidos visando determinar as relações entre contaminação e toxicidade. Os resultados sugerem ainda que a disposição dos sedimentos dragados deva ser reavaliada.

Kinetic Analysis of Gill (Na+,K+)-ATPase Activity in Selected Ontogenetic Stages of the Amazon River Shrimp, (Decapoda, Palaemonidae): Interactions at ATP- and Cation-Binding Sites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preferential infection sites of Cysticercus bovis in cattle experimentally infected with Taenia saginata eggs

The preferential sites of infection of Cysticercus bovis were evaluated in the skeletal muscle and entrails of 25 cattle that were experimentally infected with Taenia saginata (2 x 10(4) eggs). Two other animals were not inoculated (control). Ninety days after inoculation, all the cattle were euthanized. The carcasses were deboned and dissected into 26 anatomical sections (masseter muscles, brain, tongue, esophagus, heart, diaphragm, lungs, liver, kidneys, spleen, top sirloin butt, bottom sirloin butt, outside round, top (inside) round, transversus abdominus, top sirloin cap, strip loin, full tenderloin, eye of round, knuckle, shoulder clod, foreshank, shank, chuck, back ribs, and tail muscles). The dissected tissues were sliced into 5 mm sections. From the 25 cattle, 9258 C. bovis (cysticerci) were recovered; 75.02% (6946) of these were recovered from skeletal muscles and 24.98% (2312) from the entrails. A high parasitism level was found in the shoulder clod (12.55%), heart (11.02%), liver (9.48%), masseter muscles (8.51%), chuck (8.25%), strip loin and full tenderloin (7.26%), knuckle (6.63%), and back ribs (5.53%), totaling 69.23% (5738) of all of the detected cysticerci. on the other hand, there was a low C. bovis parasitism level in the brain, spleen, tail muscles, kidneys, esophagus, and diaphragm, representing just 3.9% of the total number of cysticerci. Given these results, we conclude that specific skeletal musculature regions, such as the shoulder blade, chuck, strip loin and full tenderloin, knuckle, back ribs and top round, which are not officially examined in many countries, are effective sites to efficiently screen C. bovis infection. To date, these regions have not been considered as preferential sites of C. bovis infection. Based on our work, however, these regions deserve greater attention from health inspectors because they contained a greater number of Cysticercus than the other regions of carcasses that are parasitized by T. saginata larvae. (c) 2010 Elsevier Ltd. All rights reserved.

Molecular epidemiology of Staphylococcus aureus isolates at different sites in the milk producing dairy farms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sites of Defoliation by Atta sexdens rubropilosa (Hymenoptera, Formicidae) in Artificial Plants

This study aimed to achieve a better understanding about the foraging behavior of leaf-cutter ant (Atta sexdens rubropilosa Forel) workers with respect to defoliation sites in plants. To accomplish that, artificial plants 70 cm in height were prepared and divided into four levels (heights), having natural plant leaves attached to them. Evaluations during the bioassays included the number of leaves dropped by the ants, as well as the percentage of plant mass removed. In all replicates, it became evident that the most exploited plant site is the apical region, which significantly differed from other plant levels.

Nucleation kinetics of crystalline phases from a kaolinitic body used in the processing of red ceramics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New antimicrobial therapies used against fungi present in subgingival sites-A brief review

Although the main reservoir of Candida spp. is believed to be the buccal mucosa, these microorganisms can coaggregate with bacteria in subgingival biofilm and adhere to epithelial cells. The treatment of periodontal disease includes scaling and root planning (SR?) associated with proper oral hygiene. However, some patients may have negative responses to different therapeutic procedures, with a continuous loss of insertion, so the use of antimicrobials is needed as an adjuvant to SRP treatment. The use of a broad-spectrum antibiotic, such as tetracycline and metronidazole, as an aid in periodontal treatment has also been a factor for the development of superinfections by resistant bacteria and Candida species, even in patients with HIV. In the dental practice, the most commonly used antifungals are nystatin and fluconazole. However, the introduction of new drugs like the next generation of azoles is essential before the onset of emergent species in periodontal disease. Plants are good options for obtaining a wide variety of drugs. This alternative could benefit a large population that uses plants as a first treatment option. Plants have been used in medicine for a long time and are extensively used in folk medicine, because they represent an economic alternative, are easily accessible and are applicable to various diseases. Herein, we briefly review the literature pertaining the presence of Candida sp. in periodontal pockets, the conventional antifungal resistance and new therapies that include natural antifungal agents are reviewed. (C) 2011 Elsevier Ltd. All rights reserved.

The surface treatment influence on the fatigue crack propagation of Al 7050-T7451 alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)