Influence of stocking densities in the nursery phase on the growth of Macrobrachium amazonicum reared in net pens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Net melon resistance to Didymella bryoniae according to grafting and potassium levels

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil

Reusing scrap tires has become a worldwide challenge, especially due to the great difficulty in finding ecologically and economically feasible ways to dispose of them. This has led to the creation of specific programs and legislation for reusing scrap tires. Research has shown that a certain percentage of scrap tire rubber can be added to asphalt compositions, and this has become a worldwide practice. This paper describes the properties of four asphalt compositions modified with scrap tire rubber (STR) prepared in the laboratory. These properties are then compared with those of asphalt modified with styrene butadiene styrene (SBS), a synthetic polymer and one of the most common modifiers, to verify the feasibility of using scrap tire rubber as a substitute for SBS. The scope of this study does not include an analysis of how STR affects end-of-life asphalt. The main findings indicate that STR is a potential substitute of SBS in paving material, and although it does not meet some of the standard specifications when compared with SBS, these issues can be overcome by proper care during storage and transportation. The substitution of SBS by STR also showed the potential for about 10% in expenditure savings. (C) 2012 Elsevier Ltd. All rights reserved.

Influence of voids on the flexural resistance of the NCF/RTM6 composites

A major difficulty to achieve maximum weight savings in the manufacture of composite structural components, is the tendency of these materials have the formation of voids and cracks in the interior and surface components. In aeronautical applications, controlling the volume fraction of fibers, resins and empty the components of composite is very hard. In this work, composites of epoxy matrix RTM6 reinforced with NCF (non crimp fabric carbon) processed by resin transfer molding (RTM) were characterized for porosity (P-ap) and density (rho(ad)). We used a method based on Archimedes' principle (ASTM C830) and the technique of helium pycnometer. The porosity values were compared with those determined by acid digestion (ASTM D3171). The mechanical properties of processed composites was evaluated by testing on the performing flexural and the results were correlated with the porosity value. All techniques tested to determine void content are satisfactory. The differents results can be justified for heterogeneous void distribution on laminate and differences among techniques characteristics. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

Real power losses reduction and loading margin improvement via continuation method

This letter presents an alternative approach for reducing the total real power losses by using a continuation method. Results for two simple test systems and for the IEEE 57-bus system show that this procedure results in larger voltage stability margin. Besides, the reduction of real power losses obtained with this procedure leads to significant money savings and, simultaneously, to voltage profile improvement. Comparison between the solution of an optimal power flow and the proposed method shows that the latter can provide near optimal results and so, it can be a reasonable alternative to power system voltage stability enhancement.

Sistemas distribuídos aplicados à compressão e recuperação de imagens

Digital image processing is a field that demands great processing capacity. As such it becomes relevant to implement software that is based on the distribution of the processing into several nodes divided by computers belonging to the same network. Specifically discussed in this work are distributed algorithms of compression and expansion of images using the discrete cosine transform. The results show that the savings in processing time obtained due to the parallel algorithms in comparison to its sequential equivalents is a function that depends on the resolution of the image and the complexity of the involved calculation; that is efficiency is greater the longer the processing period is in terms of the time involved for the communication between the network points.

Oral cleft prevention program (OCPP)

Background: Oral clefts are one of the most common birth defects with significant medical, psychosocial, and economic ramifications. Oral clefts have a complex etiology with genetic and environmental risk factors. There are suggestive results for decreased risks of cleft occurrence and recurrence with folic acid supplements taken at preconception and during pregnancy with a stronger evidence for higher than lower doses in preventing recurrence. Yet previous studies have suffered from considerable design limitations particularly non-randomization into treatment. There is also well-documented effectiveness for folic acid in preventing neural tube defect occurrence at 0.4 mg and recurrence with 4 mg. Given the substantial burden of clefting on the individual and the family and the supportive data for the effectiveness of folic acid supplementation as well as its low cost, a randomized clinical trial of the effectiveness of high versus low dose folic acid for prevention of cleft recurrence is warranted.Methods/design: This study will assess the effect of 4 mg and 0.4 mg doses of folic acid, taken on a daily basis during preconception and up to 3 months of pregnancy by women who are at risk of having a child with nonsyndromic cleft lip with/without palate (NSCL/P), on the recurrence of NSCL/P. The total sample will include about 6,000 women (that either have NSCL/P or that have at least one child with NSCL/P) randomly assigned to the 4 mg and the 0.4 mg folic acid study groups. The study will also compare the recurrence rates of NSCL/P in the total sample of subjects, as well as the two study groups (4mg, 0.4 mg) to that of a historical control group. The study has been approved by IRBs (ethics committees) of all involved sites. Results will be disseminated through publications and presentations at scientific meetings.Discussion: The costs related to oral clefts are high, including long term psychological and socio-economic effects. This study provides an opportunity for huge savings in not only money but the overall quality of life. This may help establish more specific clinical guidelines for oral cleft prevention so that the intervention can be better tailored for at-risk women.

Recent advances in DNA vaccines for autoimmune diseases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito dos ácidos hexenurônicos e da lignina no desempenho da ozonólize, em diferentes pHs da reação

The effect of pH on the performance of the ozonolysis stage in pulp production was evaluated for conventional and acid treated brown and oxygen delignified eucalyptus kraft pulps. The objective was to determine separately the effects of lignin and hexenuronic acid on the performance of the ozonolysis stage. The reaction of ozone with hexenuronic acid is less sensitive to pH than the reaction of ozone with lignin. The efficiency and the selectivity of the reaction of ozone with pulp decreases after removal of hexenuronic acids. Increasing up to 7.0 the pH during the ozonolysis is viable in the sequence Z/D(EOP)D, resulting in savings of H2SO4 (8,5 kg/tsa) and NaOH (5 kg/tsa), but is not recommended in the sequence Z/ED(PO).

Population dynamics and net primary production of the aquatic macrophite Nymphaea rudgeana C. F. Mey in a lotic environment of the Itanhaém River basin (SP, Brazil)

Neste trabalho, foi estudada a dinâmica populacional e estimada a produção primária líquida da macrófita aquática Nymphaea rudgeana em um braço do rio Itanhaém (Estado de São Paulo, Brasil). Esta espécie apresenta uma ampla variação anual de biomassa, em função da estação do ano, no local estudado. A partir do mês de novembro (13,1 g PS/m²), pode ser observado um aumento gradual da biomassa, atingindo o máximo em fevereiro (163,1 g PS/m²). Posteriormente, a biomassa diminui, mantendo-se em níveis baixos até um novo período de crescimento. A diminuição de biomassa está associada ao desenvolvimento de macrófitas flutuantes (Pistia stratiotes e Salvinia molesta) e, subseqüentemente, às condições ambientais desfavoráveis (valores de salinidade elevados) ao seu desenvolvimento. A produção primária líquida de N. rudgeana foi obtida a partir dos dados de biomassa e seu valor é estimado entre 3,02 e 3,82 t/ha/ano.

Economic design of (X)over-bar and R charts under Weibull shock models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Net and metabolizable protein requirements for body weight gain in hair and wool lambs

Protein is one of the limiting factors in animal production, and the knowledge of protein requirements by livestock is crucial for the success of a commercial animal raising enterprise. Thirty-four castrated lambs, 17 of them F1 Ideal x lie de France wool lambs and the remaining ones were Santa Ines hair lambs, with homogeneous initial BW, were used in the experiment. Five animals from each genotype were slaughtered in the beginning of the experimental period and used as reference. Diets (D) were composed of concentrate mix (C) and Cynodon sp. c.v. Tifton 85 hay (R), combined in three different ratios: D1 =60CAOR; D2=40C:60R and D3=20C:80R. Animals of each group of three lambs, that showed simultaneously an initial BW of 20 +/- 0.14 kg at the beginning of the dietary regimen, were slaughtered when one of them reached 35 kg, what always happened to be the one fed with D1. Net requirements for BW gain in wool lamb, fleece-free, ranged from 101 to 110 g of protein/kg BW, and for hair lamb ranged from 1 10 to 118 g of protein/kg BW. Net protein requirements for wool production ranged from 634 to 642 g/kg of produced wool. Hair lambs presented a 7.8-9.5% higher estimated net protein requirements than wool lambs, according to BW and daily weight gain (DG). Total net protein requirements for Santa Ines and wool lambs, with 30 kg of initial B W and an approximate 200 g mean DG, were 48.5 and 45.4 g/day, respectively. Metabolizable protein requirements for Santa Ines and wool lambs, with 20 kg of initial BW and an approximate 200 g mean DG were 59.4 g and 76.5 -/day, respectively. Net protein requirements for wool production was 64g/100g of produced wool. Thus, under the conditions of this experiment, it is concluded that hair lambs showed a higher concentration of protein in the body, more efficient use of the ingested protein and a consequent additional BW gain when fed isoproteic diets as compared to F1 Ideal x Ile de France wool lambs. (c) 2006 Elsevier B.V All rights reserved.

Net requirements of protein and energy for maintenance of wool and hair lambs in a tropical region

The objective of this work was to evaluate the total endogenous N losses, and protein and energy net requirements for maintenance in growing lambs. Thirty-four castrated lambs, 17 F1 Ideal X Ile de France wool and 17 Santa Inas hair lambs, averaging 20 +/- 0.14 kg BW, were used in the experiment. Five animals from each genotype were slaughtered at the beginning of the experiment and taken as controls. Diets (D) were composed of concentrate mix (C) and Cynodon sp. c.v. Tifton 85 hay (R), combined in three different ratios: D1 = 60C:40R; D2 = 40C:60R and D3 = 20C:80R. Animals of each group of three lambs, that showed BW of 20 kg at the beginning of the dietary regimen, were slaughtered when one of them reached 35 kg, what always happened to be the one fed with D1. Total endogenous N losses estimated for wool lambs were 250 mg N/kg BW0.75. For hair lambs, total endogenous N losses reached 324 mg N/kg BW0.75 . Hair lambs showed higher (P < 0.01) (29.9%) net requirements of protein for maintenance than wool lambs. In contrast, net energy (NE) requirement for maintenance was similar (P > 0.05) for both genotypes (74.27 kcal/kg BW0.75 per day), the average of the antilog of the two intercept values obtained from the estimated regression equations of heat production for zero metabolizable energy (ME) consumption. Further studies should be done to check if this trend is also true for metabolizable energy and protein in animals exhibiting BW gains in tropical region. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Joint conomic design of (x)over-bar and R charts under Weibull shock models

This paper deals with the joint economic design of (x) over bar and R charts when the occurrence times of assignable causes follow Weibull distributions with increasing failure rates. The variable quality characteristic is assumed to be normally distributed and the process is subject to two independent assignable causes (such as tool wear-out, overheating, or vibration). One cause changes the process mean and the other changes the process variance. However, the occurrence of one kind of assignable cause does not preclude the occurrence of the other. A cost model is developed and a non-uniform sampling interval scheme is adopted. A two-step search procedure is employed to determine the optimum design parameters. Finally, a sensitivity analysis of the model is conducted, and the cost savings associated with the use of non-uniform sampling intervals instead of constant sampling intervals are evaluated.

Net energy, protein and macrominerals requirements for 70 to 120 day old female rabbits

In order to determine the net energy, protein and macrominerals requirements of 70 to 120 day old, 52 female White New Zealand rabbits, weighing 1900g +/- 40g were used. At the beginning of the experimental period, 14 of the 52 young does were slaughtered and the 38 remaining animals were kept under two dietary management: ad libitum and restricted feeding. Slaughters were performed to determine each nutrient body content. The weight gain nutrient requirements depicted by the quantities of each nutrient stored into the body were obtained by applying the regression equation, which estimate the empty body nutrient content logarithm as a function of the empty body weight logarithm, as described by ARC (1980). By determining the heat production logarithm at the zero level of metabolizable energy intake, the maintenance net energy requirement was estimated to be 45.31 Kcal/day/Kg(0.75) the mean net energy. protein, calcium, phosphorous, sodium, magnesium and potassium requirements for each gram of weight gain per day were estimated to be, 2.51 Kcal, 0.21g, 0.02g, 0.005g, 0.001g, 0.0004g and 0.002g, respectively.