Line-pack management for producing electric power on peak periods

The distribution of natural gas is carried out by means of long ducts and intermediate compression stations to compensate the pressure drops due to friction. The natural gas compressors are usually driven by an electric motor or a gas turbine system, offering possibilities for energy management, one of these consisting in generating energy for use in-plant or to commercialize as independent power producer. It can be done by matching the natural gas demand, at the minimum pressure allowed in the reception point, and the storage capacity of the feed duct with the maximum compressor capacity, for storing the natural gas at the maximum permitted pressure. This allows the gas turbine to drive an electric generator during the time in which the decreasing pressure in duct is above the minimum acceptable by the sink unit. In this paper, a line-pack management analysis is done for an existing compression station considering its actual demand curve for determining the economic feasibility of maintaining the gas turbine system driver generating electricity in a peak and off-peak tariff structure. The potential of cost reduction from the point of view of energy resources (natural gas and electric costs) is also analyzed. (C) 2010 Elsevier Ltd. All rights reserved.

Knowledge-based integrated production management model

Purpose - This paper aims to propose a model of production management that integrates knowledge management, as a third dimension, to the production and work dimensions and to identify factors that promote a favorable context for knowledge sharing and results achievement in the production operations shop floor environment.Design/methodology/approach - The model proposed is built from opportunities identified in the literature review.Findings - The factors in the model integrate its three main components: knowledge management, production organization and work organization, providing a representation of the dynamics of the workplace and shop floor environment.Practical implications - The proposed model and its factors allow managers to better understand and to improve the organization activities, because it integrates knowledge management with the production organization and work organization components of traditional models.Originality/value - Literature acknowledges the role of knowledge as competitive advantage, but it is still dealt in an implicit way within the traditional models of production management. This paper proposes a model and factors that provide a favorable context for tacit knowledge sharing and results achievement in the production operations shop floor environment. The model explicitly integrates knowledge management with traditional models' components.

Nitrogen fertilization and soil management of winter common bean crop

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A snapshot of management practices and nutritional recommendations used by feedlot nutritionists in Brazil

Feedlot consulting nutritionists were invited to participate in a survey of feedlot nutritional and management practices in Brazil. Thirty-one nutritionists completed the survey on a Web site that was designed for collection of survey data. The survey consisted of 94 questions that included general information (n = 10); commodity information (n = 12); and questions about the use of coproducts (n = 5), roughage source and levels (n = 5), finishing diet adaptation methods (n = 7), supplements and micronutrients (n = 8), feed mixers (n = 6), feeding management (n = 3), cattle management and type of cattle fed (n = 16), formulation practices (n = 17), information resources used for nutritional recommendations (n = 2), and 2 additional questions. One final question addressed the primary challenges associated with applying nutritional recommendations in practice. The number of animals serviced yearly by each nutritionist averaged 121,682 (minimum = 2,000; maximum = 1,500,000; mode = 120,000; total = 3,163,750). Twenty-two respondents (71%) worked with feedlots that feed less than 5,000 animals/yr. Labor, along with availability and precision of equipment, seemed to be the main challenges for the nutritionists surveyed. Most of the nutritionists surveyed used TDN as the primary energy unit for formulation. More than 50% of the clients serviced by the 31 nutritionists did not manage feed bunks to control the quantity of feed offered per pen, and 36.6% fed cattle more than 4 times daily. The NRC (1996) and Journal of Animal Science were the most used sources of information by these nutritionists. Overall, general practices and nutritional recommendations provided by the 31 nutritionists surveyed were fairly consistent. Present data should aid in development of new research, future National Research Council models, and recommendations for Brazilian feeding systems in which Bos indicus cattle predominate.

The hydraulic management of the Barra Bonita reservoir (SP, Brazil) as a factor influencing the temporal succession of its fish community

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A QUANTITATIVE APPROACH TO SUBSIDIZE THE PRECAUTIONARY MANAGEMENT of THE SMALL-SCALE FISHERIES IN ITAIPU RESERVOIR, BRAZIL

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Brazilian consensus on gastroesophageal reflux disease: Proposals for assessment, classification, and management

The Brazilian Consensus on Gastroesophageal Reflux Disease considers gastroesophageal reflux disease to be a chronic disorder related to the retrograde flow of gastroduodenal contents into the esophagus and/or adjacent organs, resulting in a variable spectrum of symptoms, with or without tissue damage. Considering the limitations of classifications currently in use, a new classification is proposed that combines three criteria - clinical, endoscopic, and pH-metric - providing a comprehensive and more complete characterization of the disease. The diagnosis begins with the presence of heartburn, acid regurgitation, and alarm manifestations (dysphagia, odynophagia, weight loss, GI bleeding, nausea and/or vomiting, and family history of cancer). Also, atypical esophageal, pulmonary, otorhinolaryngological, and oral symptoms may occur. Endoscopy is the first approach, particularly in patients over 40 yr of age and in those with alarm symptoms. Other exams are considered in particular cases, such as contrast radiological examination, scyntigraphy, manometry, and prolonged pH measurement. The clinical treatment encompasses behavioral modifications in lifestyle and pharmacological measures. Proton pump inhibitors in manufacturers' recommended doses are indicated, with doubling of the dose in more severe cases of esophagitis. The minimum time of administration is 6 wk. Patients who do not respond to medical treatment, including those with atypical manifestations, should be considered for surgical treatment. Of the complications of gastroesophageal reflux disease, Barrett's esophagus presents a potential development of adenocarcinoma; biopsies should be performed, independent of Barrett's esophagus extent or location. In this regard the designation short Barrett's is not important in terms of management and prognosis. © 2002 by Am. Coll. of Gastroenterology.

Knowledge-based integrated Production Management Model applied to automotive companies

This paper aims to examine the relevance of a production management model, in the shop-floor operations environment, that integrates the dimensions of production organisation (lean and mass production), work organisation (enriched and semi-autonomous groups) and knowledge management. A theoretical model has been applied to automotive companies to verify model adherence. Each of those dimensions has been described by factors. Shop-floor personnel interviews were conducted to confirm the factors relevance to that company. Results have shown that the model represented the reality of those companies concerning the researched dimensions. The factors allow managers to promote a favourable context for knowledge sharing. © 2010 Inderscience Enterprises Ltd.

Effects of spray nozzles and spray volume on spodoptera frugiperda management and narrow row corn performance

The high demand of pesticides in the production systems makes the application technology one of the main alternatives to optimize the products efficiency. In this context, the study aimed to evaluate the effects of spray nozzles and spray volumes on spraying deposits, armyworm control and crop corn performance in narrow row sowing system. The experiment was carried out at experimental area of Sao Paulo State University, Campus of Botucatu/SP, Brazil, during the 2009/2010 agricultural season, in randomized blocks with factorial scheme (2x2+1) and four replications. It was tested two flat fan spray nozzles (with and without air induction) combined with two spray volumes (100 and 200 L ha-1) plus a control treatment. There was no influence of spray nozzles (without air induction) in the spray deposits levels on plants. However, the flat fan nozzle with air induction was more effective on fall armyworm, with 100% of control against 47.84% from other at 15 days after spraying. The increase in the spray volume promoted high spray deposits (415.4 and 388.6 μL g-1 dry mass for flat fan nozzle with and without air induction, respectively at V10 growth stage) and consequently, the highest spray volume (200 L-1) was more efficient in the fall armyworm suppression, with 100% of control. All the technologies tested showed lower plant injury from fall armyworm. The insecticide sprayed with different technologies did not affect the parameters of plant height and leaf area index. The corn productivity was directly related with control efficiency of fall armyworm. © 2012 Academic Journals Inc.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Recreational anglers and fishing guides from an estuarine protected area in southeastern Brazil: Socioeconomic characteristics and views on fisheries management

The Iguape and Cananéia Lagoon-Estuarine Complex is a biodiversity hotspot in southeastern Brazil. In recent decades, the region has become an important destination for recreational fishing. The objective of this study was to analyze the socioeconomic characteristics of visiting anglers and fishing guides working in the Cananéia-Iguape-Peruíbe Environmental Protected Area and their views on fisheries management. Data were collected through semi-structured interviews conducted between January 2009 and January 2010. We interviewed 278 anglers, who were predominantly male (93%) with a mean age of 47 years and from the state of São Paulo. The targeted species were snooks (Centropomus undecimales and Centropomus parallelus) and weakfishes (Cynoscion leiarchus and Cynoscion acoupa). Only half the anglers had the mandatory fishing license, and many of them lacked knowledge about catch quotas and minimum size requirements for specific species. The fishing guides (n = 80) were all male, with a mean age of 39 years and extensive experience. Most of the guides believe that the study area is somewhat degraded due to the removal of riparian vegetation, siltation, pollution, and especially the depletion of fish stocks. The opinions of the stakeholders (anglers and guides) converge on the high priority needs of the fishery and possible management actions regarding recreational fishing, such as improved fisheries enforcement (first in order of importance), proper training of fishing guides, zoning of fishing areas, and the definition of a maximum size limit. © 2013 Elsevier Ltd.

Management of pure medial orbital wall fracture with autogenous bone graft

The orbit is an irregular conical cavity formed from 7 bones including the frontal, sphenoid, zygomatic, maxillary, ethmoid, lacrimal, and palatine bones. Fractures of the internal orbit can cause a number of problems, including diplopia, ocular muscle entrapment, and enophthalmos. Although muscle entrapment is relatively rare, diplopia and enophthalmos are relatively common sequelae of internal orbital fractures. Medial orbital wall fracture is relatively uncommon and represents a challenge for its anatomical reconstruction. In this context, autogenous bone graft has been the criterion standard to provide framework for facial skeleton and orbital walls. Therefore, it is possible to harvest grafts of varying size and contour, and the operation is performed through the bicoronal incision, which is the usual approach to major orbital reconstruction. Thus, this article aimed to describe a patient with a pure medial orbital wall fracture, and it was causing diplopia and enophthalmos. The orbital fracture was treated using autogenous bone graft from calvarial bone. The authors show a follow-up of 12 months, with facial symmetry and without diplopia and enophthalmos. In addition, a computed tomography scan shows excellent bone healing at the anterior and posterior parts of the medial orbital wall reconstruction. Copyright © 2013 by Mutaz B. Habal, MD.

Aplicação dos modelos clássicos de estoques em uma rede de varejo supermercadista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelo matemático para estimativa do tempo de fertirrigação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelos de atenção primária em Botucatu-SP: condições de trabalho e os significados de integridade apresentados por trabalhadores das unidades básicas de saúde

Pós-graduação em Saúde Coletiva - FMB