In the eye of the storm: exploring the introduction of environmental issues in the production function in Brazilian companies

This article aims to analyse the introduction of environmental issues in the context of the production function, which has been referred to as the organisational area to lead corporate environmental management. With that purpose, the theoretical references for corporate environmental management and the necessary alterations in production function have been organised to include environmental aspects, especially in terms of product and process development, quality management, and logistics. Considering that this research field still lacks empirical evidence for Brazilian companies, four case studies were conducted using companies located in the country. The environmental management maturity level of those companies tends to follow the rate with which the environmental issue is introduced in production sub-areas, especially in the product development process. However, in most cases we found that the companies had difficulties in structuring the insertion of the environmental dimension in logistics. The final notes point out the distance observed between what is recommended by international literature and the reality of Brazilian companies in the challenge of making the production function environmentally friendly.

Design and management optimization of trickle irrigation systems using non-linear programming

A non-linear model is presented which optimizes the lay-out, as well as the design and management of trickle irrigation systems, to achieve maximum net benefit. The model consists of an objective function that maximizes profit at the farm level, subject to appropriate geometric and hydraulic constraints. It can be applied to rectangular shaped fields, with uniform or zero slope. The software used is the Gams-Minos package. The basic inputs are the crop-water-production function, the cost function and cost of system components, and design variables. The main outputs are the annual net benefit and pipe diameters and lengths. To illustrate the capability of the model, a sensitivity analysis of the annual net benefit for a citrus field is evaluated with respect to irrigated area, ground slope, micro-sprinkler discharge and shape of the field. The sensitivity analysis suggests that the greatest benefit is obtained with the smallest microsprinkler discharge, the greatest area, a square field and zero ground slope. The costs of the investment and energy are the components of the objective function that had the greatest effect in the 120 situations evaluated. (C) 1996 Academic Press Limited

Estratégia competitiva e o papel da função produção: uma análise em empresas do polo calçadista de Birigui

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relação entre uniformidade da produtividade e indicadores de uniformidade da irrigação em sistema de irrigação por microaspersão em citros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eficiência de produção segundo diferentes mecanismos de acesso à terra na reforma agrária brasileira

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Isoquantas de Produtividade da Cana-de-açúcar em Função de Níveis de Irrigação e Adubação Nitrogenada.

Um experimento de campo com diferentes níveis de irrigação e nitrogênio foi conduzido no Centro de Ciências Agrárias da Universidade Federal de Alagoas com o objetivo de determinar a função de produção e as isoquantas de produtividade agrícola da cana-de-açúcar com base nas lâminas de irrigação e doses de nitrogênio (N). A precipitação pluvial efetiva durante o ciclo de produção foi 1.037 mm e a lâmina de irrigação bruta máxima foi 873 mm. A produtividade agrícola ficou entre 118 e 188 Mg ha-1, média de 160 Mg ha-1. Na isoquanta da produtividade agrícola média da cana-de-açúcar, a taxa marginal de substituição de água por N é 0,36 kg mm-1 (na interseção das retas de 25 kg de N ha-1 e 760 mm de irrigação) e infinita (na interseção das retas de 125 kg de N ha-1 e 390 mm de irrigação). A quantidade de água e nitrogênio de menor custo para produzir 160 Mg ha-1 foi 390 mm de irrigação e 112 kg de N ha-1. A regressão polinomial de segundo grau apresentou ajuste médio (r2 = 62%) para a produtividade agrícola em relação às lâminas de irrigação e doses de nitrogênio. A resposta da cana-de-açúcar à adubação nitrogenada aumenta em proporção direta com disponibilidade hídrica do solo.

O efeito do fim do Acordo sobre Têxteis e Vestuários para a indústria brasileira: uma análise a partir da fronteira de produção estocástica

This article investigates the productivity and production function of thirteen large Brazilian textile and clothing companies before and after the end of the Agreement on Textiles and Clothing (AVT) that abolished import quotas in 2005. For this purpose, we estimate the stochastic production frontier in panel data between 1997 and 2008 and simultaneously an explanatory equation for the (in)efficiency of firms, as proposed by Battese and Coelli (1995). The results indicated that more efficient firms are the oldest. The total factor productivity of firms tended to fall, even after the end of quotas, increasing productivity only from 2007. Overall, firms from Santa Catarina were more efficient than those of other states.

Lima beans production and economic revenue as function of organic and mineral fertilization

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Measurements of inclusive W plus jets production rates as a function of jet transverse momentum in p(p)over-bar collisions root s=1.96 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ratios of dijet production cross sections as a function of the absolute difference in rapidity between jets in proton-proton collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Broiler breeder behavior and egg production as function of environmental temperature

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

NUTRITIONAL STATUS AND DRY MASS PRODUCTION OF ALFALFA IN FUNCTION OF POTASSIUM RATES IN TWO SOILS

Potassium fertilization is very important to alfalfa crop in terms of yield, quality and persistence of forage, especially on soils naturally poor K. Thus, to assess the effects of K fertilization in alfalfa production and nutritional status, was carried out an experiment in a greenhouse using samples of a Dystrophic Oxisol medium texture (LV) (0.6 mmol(c) dm(-3) K) and a Dystrophic Ultisol sandy/medium texture (PVA) (2.2 mmol(c) dm(-3) K). A completely randomized design in a factorial arrangement 6 x 2 (six K rates and two soils) was used, with four replications. The K rates used were: 0, 25, 50, 100, 150 and 200 mg kg(-1) K. Potassium fertilization increased K content in soil and shoots. Dry matter production was increased with the K addition. However, in the PVA, this occurred only in the second cut. In LV, potassium fertilization increased N concentration in alfalfa shoots in both cuts. Plants with K concentration around 10 g kg(-1) had typical symptoms of this nutrient deficiency. The K critical levels of K in soil and shoots were 1.8 mmolc dm(-3) and 16.7 g kg(-1), respectively.

Abrasion resistance of direct and indirect resins as a function of a sealant veneer

Abrasive wear is one of the most common type of wear that not only affect teeth, as also dental restorations. Thus to investigate one of the etiological factors as tooth brushing procedure is clinical relevant in order to select the best material combination that may prevent damage of resin dental restoration's abrasion. This study evaluated the influence of tooth brushing on mass loss and surface roughness of direct Venus (Vs) and indirect Signum (Sg) resin composites, with and without a surface sealant, Fortify (F). Twenty-four specimens were prepared with each resin composite, using their proprietary curing units, according to manufacturer's instructions. All the specimens were polished and ultrasonically cleaned in distilled water for 5 minutes. Half of the specimens of each resin (n = 12) were covered with F (Vs F and Sg F ), except for the control (C) specimens (Vs C and Sg C ), which were not sealed. Mass loss (ML) as well as surface roughness (Ra ) was measured for all the specimens. Then, the specimens were subjected to toothbrush-dentifrice abrasion, using a testing machine for 67.000 brushing strokes, in an abrasive slurry. After brushing simulation, the specimens were removed from the holder, rinsed thoroughly and blot dried with soft absorbent paper. The abrasion of the material was quantitatively determined with final measurements of ML and surface roughness, using the method described above. ML data were analyzed by two-way analysis of variance (ANOVA) and the analysis indicated that resin composites were not statistically different; however, the specimens sealed with F showed higher ML. Ra mean values of the groups Vs F and Sg F significantly increased. Tooth brushing affects mainly the roughness of the direct and indirect resin composites veneered with a sealant.

Comparison of logistic and neural network models to fit to the egg production curve of White Leghorn hens

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The amount of solar energy made available for the production of a sabia (Mimosa caesalpinaefolia Benth.) seed has a determinating effect on its becoming dormant

The amount of solar energy made available for the production of a sabid seed varied as a function of the time of the year, the face of the plant in which, the position in the plant on which and the position in the pod in which it was produced.Variation in solar energy availability as a consequence of the time of the year was a direct consequence of latitude. At 21degrees5'22 S the highest amounts of Global Solar Radiation (GSR) reaching the site where the experiment was conducted took place during the months from November through February. During these months there were no marked differences between any two of the amounts of GSR reaching faces North (N), South (S), West (W) East (E). From February through November (period during which the sabid plants of this study flowered and the resulting seeds matured and were harvested) the total GSR's were the lowest and marked differences were found between faces N and S, with face N receiving much more GSR than face S. During that period, faces W and E received practically the same amount of GSR and it was much less than that received by face N and much more than the one received by face S.The amount of biological energy made available for the development of a seed seemed also to vary according to a dry matter partitioning strategy by the plant -the central third of the plant seemed to be the one receiving the highest amounts of energy, followed either by the upper or the lower third of the plant- it was not very clear which third of the plant immediately followed the central one. The partitioning of biological energy at the pod level also seemed to follow a strategy by which the central seeds would be the ones to receive more, followed by the proximal seeds and these by the distal ones.This availability of energy seemed to have a direct effect on seed size, weight and on the percentage of seeds which showed a degree of dormancy deep enough to prevent their germinating under the conditions of a standard germination test.The implications of these results for the improvement of methods for the overcoming of dormancy of sabia seeds are discussed.