Irrigation and intercropping with macadamia increase initial arabica coffee yield and profitability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

RAPD marker use for improving resistance to Helicoverpa zea in corn

Helicoverpa zea is responsible for great losses to the corn, Zen mays L., crops final productivity, and the best way to control it is by improving genetic resistance. In collaboration with corn improvement and increasing resistance to insects through molecular marker assisted selection, this work had as an objective the selection of resistant (RP) and susceptible progenies (SP) to H. zea based on the RAPD technique. Molecular markers were Found, among the resistant progenies and it is suggested that linkage of these within the Zapalote Chico corn race, be used to extract resistance genes from this race as a donor. The progenies were selected from a population of half-sibs exhibiting a broader genetic base (FCAVJ-VF14). After DNA extraction, two sample bulks were formed; one made up of the six most resistant plants, the other of the six least resistant plants. Eighty-six primers were tested for PCR reactions with the resistant and susceptible bulks and analyzed on agarose electrophoresis for the detection of RAPD band polymorphism. The results of the banding patterns and similarity values indicated a nucleotide sequence amplified by the primer OPC-2 as a possible molecular marker for the identification of resistant progenies and a homology region between them and the Zapalote Chico corn race.

Improving photoprotection of Beauveria bassiana conidia for biological control of the cactus pest Dactylopius opuntiae in the semiarid region northeast of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Soil microbial biomass in organic farming system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Abordaje práctico sobre cómo mejorar el bienestar en los bovinos

Current challenges of humanity require a new paradigm for animal production, and invest time and attention to the development of new production techniques that take into account the principles of sustainability and animal welfare science. To do this, we must be committed to promoting animal welfare and health, ensure environmental sustainability, consumer satisfaction and profitability for producers. To change our relationship with animals there is no need for changes in market conditions or large investments, it is enough to know better the needs of the animals we raise, the management system adapted to its characteristics. Even in the most favorable management conditions, on farms that have technological resources and trained personnel, there is much to change, especially in the daily management of the animals. Some of the risks more evident in the traditional systems of beef production are: problems during parturition, morbidity and mortality of calves, lack of shade in the pastures, improper handling of animals, risk of injury, inadequate infrastructure, poor management practices during routine processing (marking, castration, vaccination, dehorning), poor welfare during loading, transport, unloading and slaughter. To remedy this, you can adopt good management practices, which have been shown to reduce risk and improve the welfare of cattle in different stages of the production chain. The objective of this review is to show some of the risks that reduce the welfare of cattle and examples of how the adoption of best management practices impact on improving the productivity of these production systems. Finally, some indicators for assessing welfare in production systems are shown.

The role of clouds in improving the regression model for hourly values of diffuse solar radiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Improving the GNSS positioning stochastic model in the presence of ionospheric scintillation

Ionospheric scintillations are caused by time-varying electron density irregularities in the ionosphere, occurring more often at equatorial and high latitudes. This paper focuses exclusively on experiments undertaken in Europe, at geographic latitudes between similar to 50 degrees N and similar to 80 degrees N, where a network of GPS receivers capable of monitoring Total Electron Content and ionospheric scintillation parameters was deployed. The widely used ionospheric scintillation indices S4 and sigma(phi) represent a practical measure of the intensity of amplitude and phase scintillation affecting GNSS receivers. However, they do not provide sufficient information regarding the actual tracking errors that degrade GNSS receiver performance. Suitable receiver tracking models, sensitive to ionospheric scintillation, allow the computation of the variance of the output error of the receiver PLL (Phase Locked Loop) and DLL (Delay Locked Loop), which expresses the quality of the range measurements used by the receiver to calculate user position. The ability of such models of incorporating phase and amplitude scintillation effects into the variance of these tracking errors underpins our proposed method of applying relative weights to measurements from different satellites. That gives the least squares stochastic model used for position computation a more realistic representation, vis-a-vis the otherwise 'equal weights' model. For pseudorange processing, relative weights were computed, so that a 'scintillation-mitigated' solution could be performed and compared to the (non-mitigated) 'equal weights' solution. An improvement between 17 and 38% in height accuracy was achieved when an epoch by epoch differential solution was computed over baselines ranging from 1 to 750 km. The method was then compared with alternative approaches that can be used to improve the least squares stochastic model such as weighting according to satellite elevation angle and by the inverse of the square of the standard deviation of the code/carrier divergence (sigma CCDiv). The influence of multipath effects on the proposed mitigation approach is also discussed. With the use of high rate scintillation data in addition to the scintillation indices a carrier phase based mitigated solution was also implemented and compared with the conventional solution. During a period of occurrence of high phase scintillation it was observed that problems related to ambiguity resolution can be reduced by the use of the proposed mitigated solution.

GPS Satellite Kinematic Relative Positioning: Analyzing and Improving the Functional Mathematical Model Using Wavelets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modification of polyethylene terephthalate by atmospheric pressure dielectric barrier discharge (DBD) in view of improving the polymer wetting properties

Surface treatment of polymers by discharge plasmas has increasingly found industrial applications due to its capability of modifying uniformly the surface without changing the material bulk properties. This work deals with surface modification of polyethylene terephthalate (PET) by a dielectric barrier discharge (DBD) at atmospheric pressure. The treatments were conducted in air, nitrogen or argon plasma. The polymer surface was characterized by contact angle measurement, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The results show that the plasma treatment introduces oxygen-and nitrogen-related polar groups on the polymer surface and promotes the surface roughening. Both plasma-induced surface modifications contribute to the enhancement of the polymer wettability.

Improving the passive doppler geolocation system through extension of the data reception network

O objetivo deste trabalho e apresentar uma investigação preliminar da precisão nos resultados do sistema de localização geográfica de transmissores desenvolvido utilizando o software da rede brasileira de coleta de dados. Um conjunto de medidas de desvio Doppler de uma única passagem do satélite, considerando uma Plataforma de Coleta de Dados (PCD) e uma rede de estações de recepção terrestrês, e denominado uma rede de recepção de dados. Assim, a rede brasileira de coleta de dados com o uso de múltiplas estações de recepção permitira o incremento na quantidade de dados coletados com consequente melhora na precisão e na confiabilidade das localizações fornecidas. Consequentemente uma maior quantidade de localizações válidas e mais precisas. Os resultados e análises foram obtidos sob duas condições: na primeira foi considerada uma condição prática com dados reais e dados ideais simulados, para comparar os resultados considerando a mesma passagem do satélite, transmissor e duas estações de recepção conhecidas; na segunda foram consideradas as condições ideais simuladas a partir de medidas de um transmissor fixo, três estações de recepção e dois satélites. Os resultados utilizando a rede de recepção de dados foram bastante satisfatórios. O estudo realizado mostrou a importãncia da instalação de novas estações de recepção terrenas distribuídas no territorio nacional, para um aumento na quantidade de medidas e consequentemente uma maior quantidade de localizações válidas e mais precisas.

Improving the Fluorescence Detectability of Polycyclic Aromatic Hydrocarbons for Evaluation of Workplace Environments of Cement Industries Processing Organic Residues

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Improving the field production environment for soybeans

During the past 10 years, soybeans have reached a prominent position among crops in the world. A substantial contribution to world production has been achieved by tropical countries, due to favorable conditions for high yields. Two limitations keep commercial yields below those obtained in experimental results (above 3,000 kg/ha): one is the lack of local adapted varieties and the other is an adequate field production environment. Solutions must be obtained by local research data. Seedbed preparation is one of the most important production steps, since the other production practices are dependent on it. Conventional methods and minimum tillage, when soybeans follow another crop, are being used, with the problem of soil compaction and losses by erosion. Looking for superior strains of Rhizobium is crucial because nitrogen can be supplied by a proper symbiosis. The addition of limestone to the soil is a common practice used to raise the pH to proper levels. The use of fertilizers should be guided by local research findings. Chemical control of weeds, pests and diseases is needed to prevent yield losses, but possible effects on the environment should be considered. © 1981 American Oil Chemists' Society.

Profitability measures of dairy cows

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)