Some implications of the cosmological constant to fundamental physics

In the presence of a cosmological constant, ordinary Poincaré special relativity is no longer valid and must be replaced by a de Sitter special relativity, in which Minkowski space is replaced by a de Sitter spacetime. In consequence, the ordinary notions of energy and momentum change, and will satisfy a different kinematic relation. Such a theory is a different kind of a doubly special relativity. Since the only difference between the Poincaré and the de Sitter groups is the replacement of translations by certain linear combinations of translations and proper conformal transformations, the net result of this change is ultimately the breakdown of ordinary translational invariance. From the experimental point of view, therefore, a de Sitter special relativity might be probed by looking for possible violations of translational invariance. If we assume the existence of a connection between the energy scale of an experiment and the local value of the cosmological constant, there would be changes in the kinematics of massive particles which could hopefully be detected in high-energy experiments. Furthermore, due to the presence of a horizon, the usual causal structure of spacetime would be significantly modified at the Planck scale. © 2007 American Institute of Physics.

Vertical growth of mini watermelon according to the training height and plant density

A melancia é uma espécie tradicionalmente conduzida em campo no sistema rasteiro. As cultivares de frutos pequenos (1 a 3 kg), que adquirem melhores preços de mercado, vêm sendo cultivadas também em ambiente protegido, onde são conduzidas no sistema vertical, com poda de ramos e raleio de frutos. Essas práticas possibilitam aumentar o adensamento das plantas, a qualidade e a produtividade de frutos em comparação ao sistema rasteiro. Objetivou-se com este trabalho avaliar a influência de três alturas de condução (1,7; 2,2 e 2,7 m) e duas densidades de plantas (3,17 e 4,76 plantas m-2) sobre as características produtivas e qualitativas da mini melancia Smile cultivada em ambiente protegido. A poda da haste principal foi realizada aos 43, 55 e 66 dias após o transplante (DAT) para as alturas de condução de 1,7; 2,2 e 2,7 m, respectivamente. A massa seca dos ramos, dos pecíolos, das folhas e total foram afetados pela altura de condução, cujos maiores valores foram obtidos para as plantas conduzidas a 2,2 e 2,7 m de altura. A área foliar, a área foliar específica e o índice de área foliar não foram influenciados pela altura de condução das plantas. A altura de condução de 2,7 m elevou a produtividade total. Entretanto, a produtividade comercial, a massa média dos frutos e todas as características qualitativas não foram significativamente diferentes das obtidos pela altura de poda de 2,2 m. em relação à densidade de plantas, a melhor opção foi a de 4,76 plantas m-2, pois elevou a produtividade comercial em 37,4% sem reduzir a massa média dos frutos.

Responsiveness of the interrenal tissue of Jundia (Rhamdia quelen) to an in vivo ACTH test following acute exposure to sublethal concentrations of agrichemicals

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistance of cattle of various genetic groups to the tick Rhipicephalus microplus and the relationship with coat traits

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Characterization of metallic electrical contacts to SnO2 thin films lightly doped with Eu3+ ions, and photo-induced resistivity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Losing identity: structural diversity of transposable elements belonging to different classes in the genome of Anopheles gambiae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Astylus variegatus (Coleoptera, Melyridae): Cytogenetic study of a population exposed to agrochemical products

In this work we describe the cytogenetic analyses performed in specimens of Astylus variegatus (Germar, 1824) collected in two localities: one area of natural vegetation and one of agricultural crops, where agrochemical products were used. Astylus variegatus had karyotypes with 2n(male) = 16+Xy p and 2n (female) = 16+XXp, with exclusively metacentric chromosomes. Pachytene spermatocytes showed synapsed autosomal bivalents and non-associated sex chromosomes. In diplotene, the autosomal bivalents exhibited one or two terminal chiasmata and the Xy p had a typical parachute configuration. In meiotic cells of some specimens, an extra chromosome, interpreted as a B chromosome, was observed. C-banding showed constitutive heterochromatin in the pericentromeric region of all chromosomes, with the exception of the y p. Silver nitrate staining revealed one nucleolus organizer region (NOR) on the terminal region of the short arm of the second autosome pair. Silver staining of meiotic cells confirmed the NOR pattern detected in mitotic cells and revealed an argentophilous material on the Xy p. A cytogenetic comparison between the two populations of A. variegatus showed a statistically significant divergence (chi2 = 117.10; df = 1) in the number of aneuploid cells and a higher frequency of B chromosome in the population exposed to agrochemicals.

Mechanism of micronuclei formation in polyploidizated cells of Allium cepa exposed to trifluralin herbicide

The trifluralin is an agent that promotes a cellular damage due to its direct action on the microtubules. This action leads to a decontrol in the cellular division, bringing about polyploid cells. In this work, we show the evidences that the exceeding genetical material of theses polyploidizated cells tends to be eliminated from the nucleus in the form of micronucleus. Our analyses prove this fact, both by the presence of a number of cells carrying micronucleus, and by the evidences of the elimination of the exceeding material itself, after exposition of the Allium cepa root tips tested with several concentration of trifluralin herbicide. It was noticed that the residual concentration induced a number of polyploid cells, micronuclei and mini cells. Inferences about the implications of the elimination of genetic material from micronuclei, such as cell viability and apoptosis, are also presented. (c) 2007 Elsevier B.V. All rights reserved.

MODEL FOR ASYMPTOTIC D-STATE PARAMETERS OF LIGHT-NUCLEI - APPLICATION TO HE-4

A simple method for calculating the asymptotic D-state observables for light nuclei is suggested. The method exploits the dominant clusters of the light nuclei. The method is applied to calculate the He-4 asymptotic D to S normalization ratio rho(alpha) and the closely related D-state parameter D2alpha. The study predicts a correlation between D2alpha and B(alpha), and between rho(alpha) and B(alpha), where B(alpha) is the binding energy of He-4. The present study yields rho(alpha) congruent-to -0.14 and D2alpha congruent-to -0.12 fm2 consistent with the correct experimental eta(d) and the binding energies of the deuteron, triton, and the alpha particle, where eta(d) is the deuteron D-state to S-state normalization ratio.

Use of U-isotope disequilibrium to evaluate the weathering rate and fertilizer-derived uranium in São Paulo state, Brazil

The U-disequilibrium method was utilized to evaluate the velocity of alteration of rocks and fertilizer-derived uranium in the Corumbatai River basin, São Paulo state, Brazil. The Corumbatai River basin is affected by the continuous use of fertilizer-derived uranium utilized in sugar cane crops, increasing the dissolved uranium concentration in the Corumbatai River (Santa Terezinha station) in the wet period to 43%. The weathering rate in the Corumbatai River basin utilizing the U-isotope modeling was 0.0265 mm/year (corresponding to 38,000 years to weather 1 m of rock under actual climatic conditions). However, when the inputs of anthropogenic uranium were considered, then a weathering rate of 0.022 mm/year (corresponding to 45,500 years to weather 1 m of rock) was determined. The removed material in the Corumbatai River basin is mainly from two sub-basins (the Cabecas River and Passa Cinco River), where the sandstones weather easier than the siltstones and claystones in the basin.

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

Objectives. This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application.Methods. Thirty-two blocks (6.4 mm x 6.4 mm x 4.8 mm) were fabricated using a microparticulate feldspathic ceramic (Vita VM7), ultrasonically cleaned with water for 5 min and randomly divided into four groups, according to the type of etching agent and silanization method: method 1, etching with 10% hydrofluoric (HF) acid gel for I min + silanization; method 2, HF only; method 3, etching with 1.23% acidulated phosphate fluoride (APF) for 5 min + silanization; method 4, APF only. Conditioned blocks were positioned in their individual silicone molds and resin cement (Panavia F) was applied on the treated surfaces. Specimens were stored in distilled water (37 degrees C) for 24 h prior to sectioning. After sectioning the ceramic-cement blocks in x- and Y-axis with a bonded area of approximately 0.6 mm(2), the microsticks of each block were randomly divided into two storage conditions: Dry, immediate testing; TC, thermal cycling (12,000 times) + water storage for 150 d, yielding to eight experimental groups. Microtensile bond strength tests were performed in universal testing machine (cross-head speed: 1 mm/min) and failure types were noted. Data obtained (MPa) were analyzed with three-way ANOVA and Tukey's test (alpha = 0.05).Results. Significant influence of the use of silane (p < 0.0001), storage conditions (p = 0.0013) and surface treatment were observed (p = 0.0014). The highest bond strengths were achieved in both dry and thermocycled conditions when the ceramics were etched with HF acid gel and silanized (17.4 +/- 5.8 and 17.4 +/- 4.8 MPa, respectively). Silanization after HF acid gel and APT treatment increased the results dramatically (14.5 +/- 4.2-17.4 +/- 4.8 MPa) compared to non-silanized groups (2.6 +/- 0.8-8.9 +/- 3.1 MPa) where the failure type was exclusively (100%) adhesive between the cement and the ceramic.Significance. Silanization of the feldspathic ceramic surface after APF or HF acid etching increased the microtensile bond strength results significantly, with the latter providing higher results. Long-term thermocycling and water storage did not decrease the results in silanized groups. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Water regulation of actinomycin-D binding to DNA: the interplay among drug affinity, DNA long-range conformation, and hydration

Actiaomycin-D (actD) binds to natural DNA at two different classes of binding sites, weak and strong. The affinity for these sites is highly dependent on DNA se(sequence and solution conditions, and the interaction appears to be purely entropic driven Although the entropic character of this reaction has been attributed to the release of water molecules upon drug to DNA complex formation, the mechanism by which hydration regulates actD binding and discrimination between different classes of binding sites on natural DNA is still unknown. In this work, we investigate the role of hydration on this reaction using the osmotic stress method. We skew that the decrease of solution water activity, due to the addition of sucrose, glycerol ethylene glycol, and betaine, favors drug binding to the strong binding sites on DNA by increasing both the apparent binding affinity Delta G, and the number of DNA base pairs apparently occupied by the bound drug n(bp/actD). These binding parameters vary linearly with the logarithm of the molar fraction of water in solution log(X-w), which indicates the contribution of water binding to the energetic of the reaction. It is demonstrated that the hydration change measured upon binding increases proportionally to the apparent size of the binding site n(bp/uctD). This indicates that n(bp/actD) measured from the Scatchard plod is a measure of the size of the DNA molecule changing conformation due to ligand binding. We also find that the contribution of DNA deformation, gauged by n(bp/act) to the total free energy of binding Delta G, is given by Delta G = Delta G(local) + n(bp/actD) x delta G(DNA), where Delta G(local), = -8020 +/- 51 cal/mol of actD bound and delta G(DNa) = -24.1 +/- 1.7cal/mol of base pair at 25 degrees C. We interpret Delta G(local), as the energetic contribution due to the direct interactions of actD with the actual tetranucleotide binding site, and it n(bp/actB) X delta G(DNA) as that due to change inconformation, induced by binding, of it n(bp/actD) DNA base pairs flanking the local site. This interpretation is supported by the agreement found between the value of delta G(DNA) and the torsional free energy change measured independently. We conclude suggesting an allosteric model for ligand binding to DNA, such that the increase in binding affinity is achieved by increasing the relaxation of the unfavorable free energy of binding storage at the local site through a larger number of DNA base pairs. The new aspect on this model is that the size of the complex is not fixed but determined by solutions conditions, such as water activity, which modulate the energetic barrier to change helix conformation. These results may suggest that long-range allosteric transitions of duplex DNA are involved in the inhibition of RNA synthesis by actD, and more generally, in the regulation of transcription. (C) 2000 John Wiley & Sons, Inc.

Stability analysis of the attitude of artificial satellites subject to gravity gradient torque

Using a canonical formulation, the stability of the rotational motion of artificial satellites is analyzed considering perturbations due to the gravity gradient torque. Here Andoyer's variables are used to describe the rotational motion. One of the approaches that allow the analysis of the stability of Hamiltonian systems needs the reduction of the Hamiltonian to a normal form. Firstly equilibrium points are found. Using generalized coordinates, the Hamiltonian is expanded in the neighborhood of the linearly stable equilibrium points. In a next step a canonical linear transformation is used to diagonalize the matrix associated to the linear part of the system. The quadratic part of the Hamiltonian is normalized. Based in a Lie-Hori algorithm a semi-analytic process for normalization is applied and the Hamiltonian is normalized up to the fourth order. Once the Hamiltonian is normalized up to order four, the analysis of stability of the equilibrium point is performed using the theorem of Kovalev and Savichenko. This semi-analytical approach was applied considering some data sets of hypothetical satellites. For the considered satellites it was observed few cases of stable motion. This work contributes for space missions where the maintenance of spacecraft attitude stability is required.

Attributable fraction of work accidents related to occupational noise exposure in a Southeastern city of Brazil

Noise is the most frequent type of occupational exposure and can lead to both auditory and extra-auditory dysfunction as well as increasing the risk of work accidents. The purpose of this study was to estimate the attributable fraction of work accidents related to occupational noise exposure in a medium-sized city in Southeast Brazil. In this hospital-based case-control study, including 600 cases and 822 controls, the odds ratio of work accidents (controlled for several covariables) was obtained classifying occupational noise exposure into four levels and determining the prevalence at each level. Based on these data, the calculated attributable fraction was 0.3041 (95%CI: 0.2341-0.3676), i.e., 30% of work accidents in the study area were statistically associated with occupational noise exposure. The authors discuss the causes of this association and the implications for the prevention of work accidents.

Resistance of beef cattle of two genetic groups to ectoparasites and gastrointestinal nematodes in the state of São Paulo, Brazil

The resistance to infestations by ectoparasites and infections by gastrointestinal nematodes was studied in 45 animals (males and females) of two genetic groups: purebred Nelore (NI, n=28) and Three-Cross (1/2 Angus+1/4 Canchim+1/4 Nelore - TC, n=17). The animals were monitored for 24months, during which they were left to graze in tropical pastures without receiving treatment for parasites. Each month the animals were examined for infestations by external parasites, to count the numbers of cattle ticks Rhipicephalus microplus with diameter greater than 4.5mm present on the left side, horn flies (Haematobia irritans) present in the lumbar region and botfly larvae (Dermatobia hominis) present on the entire body. The H. irritans counts were performed with the aid of digital photographs. At the time of examination, fecal samples were collected to count the eggs per gram (EPG) and to perform coprocultures, and peripheral blood samples were drawn to determine the packed cell volume (PCV) and to count the eosinophils. For statistical analysis, the count data were transformed into log10 (n+1), where n is the number of parasites. For PCV, significant effects (P<0.05) were found for collection month (CO), genetic group (GG) and gender (SX), with means and respective standard errors of 41.5±0.65% for the NI animals, 39.3±0.83% for the TC, 41.5±0.72% for the females and 39.3±0.77% for the males. Regarding the eosinophil counts, only the effect of sex was significant (P<0.01), with means and respective standard errors of 926.0±46.2/μL, for males and 1088.0±43.8/μL of blood, for females. The NI animals presented lower mean counts for all the external parasites compared to the TC animals (P<0.01). For ticks, the transformed means followed by standard errors for the NI and TC animals were 0.06±0.01 and 0.34±0.02, while for horn flies these were 0.92±0.05 and 1.36±0.06 and for botfly larvae they were 0.05±0.03 and 0.45±0.05, respectively. The average EPG values were only influenced by CO (P<0.01). The coprocultures revealed the presence of the following endoparasites: Haemonchus spp., Cooperia spp., Oesophagostomum spp. and Trichostrongylus spp., the last in smaller proportion. There were no significant differences between the genetic groups for the endoparasite loads, except for Cooperia spp., which were present in greater number (P<0.05) in the NI group. The results obtained in this experiment confirm previous findings of greater susceptibility of the Nelore breed to Cooperia spp. and high resistance to ectoparasites. © 2013 Elsevier B.V.