Gene flow networks among American Aedes aegypti populations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7

Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance to wear, reworking and rebuilding operations and repair of worn components on landing gear, hydraulic cylinders, actuators, propeller hub assemblies, gas turbine engines, and so on. The aircraft industry is also trying to use thermal spray technology to replace electroplating coatings such as hard chromium. In the present work, WC-Co coatings were built up on an AA 7050 aluminum alloy using high velocity oxygen fuel (HVOF) technology and a liquid nitrogen cooling prototype system. The influence of the spray parameters (standard conditions, W19S, increasing the oxygen flux, W19H, and also increasing the carrier gas flux, W19F) on corrosion, friction, and abrasive wear resistance were also studied. The coatings were characterized using optical (OM) and scanning electron (SEM) microscopy, and X-ray diffraction (XRD). The friction and abrasive wear resistance of the coatings were studied using Rubber Wheel and Ball on Disk tests. The electrochemical studies were conducted using open-circuit potential (E(oc)) measurements and electrochemical impedance spectroscopy (EIS). Differences among coated samples were mainly related to the variation of the thermal spray parameters used during the spray process. No significant differences were observed in the wear resistance for the coatings studied, and all of them showed a wear rate around 10 times lower than that of the aluminum alloy. The results of mass loss and wear rate were interpreted considering different mechanisms. Comparing the different spray parameters, the oxygen flux (higher flame temperature) produced the sample which showed the highest corrosion resistance in aerated and unstirred 3.5% NaCl solution. Aluminum ions were detected on the surface almost immediately after the immersion of samples W19S and W19F in chloride solution, showing that the electrolyte reached the substrate and galvanic corrosion probably occurred. For sample W19H, aluminum ions were not detected even after 120 min of immersion in NaCl solution. (C) 2008 Elsevier B.V. All rights reserved.

Automation and cybernetics: Control of a flexible one-link manipulator

States that control is of the essence in cybernetics. Summarizes the dynamic equations for a flexible one-link manipulator moving in the horizontal plane. Employs the finite element method, based on elementary beam theory, during the process of formulation. Develops and instruments a one-link flexible manipulator in order to control its vibration modes. Uses a simple second-order vibration model which permits vibrations on the rod to be estimated using the hub angle. The validation of the dynamic model and the structural analysis of the flexible manipulator is reached using proper infrared cameras and active light sources for determining actual positions of objects in space. Shows that the performance of the control is satisfactory, even under perturbation action.

Frequencies of ABO, MNSs, and Duffy phenotypes among blood donors and malaria patients from four Brazilian Amazon areas

We compared the serological phenotypic frequencies of ABO, MNSs, and Duffy in 417 blood donors and 309 malaria patients from four Brazilian Amazon areas. Our results suggest no correlation between ABO phenotype and malaria infection in all areas studied. We observed significant correlation between the S + s +, S + s-, and S - s + phenotypes and malaria infection in three areas. Some of the Duffy phenotypes showed significant correlation between donors and malaria patients in different areas. These data are an additional contribution to the establishment of differential host susceptibility to malaria.

Analog Modeling of Human Cognitive Functions with Tripartite Synapses

Searching for an understanding of how the brain supports conscious processes, cognitive scientists have proposed two main classes of theory: Global Workspace and Information Integration theories. These theories seem to be complementary, but both still lack grounding in terms of brain mechanisms responsible for the production of coherent and unitary conscious states. Here we propose following James Robertson's "Astrocentric Hypothesis" - that conscious processing is based on analog computing in astrocytes. The "hardware" for these computations is calcium waves mediated by adenosine triphosphate signaling. Besides presenting our version of this hypothesis, we also review recent findings on astrocyte morphology that lend support to their functioning as Local Hubs (composed of protoplasmic astrocytes) that integrate synaptic activity, and as a Master Hub (composed, in the human brain, by a combination of interlaminar, fibrous, polarized and varicose projection astrocytes) that integrates whole-brain activity.

Astrocytes and human cognition: Modeling information integration and modulation of neuronal activity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Predicción de ecuaciones para el porcentaje de grasa a partir de circunferencias corporales en niños pre-púberes

Introduction: The analysis of body composition through direct and indirect methods allows the study of the various components of the human body, becoming the central hub for assessing nutritional status. Objective: The objective of the study was to develop equations for predicting body fat% from circumferential body arm, waist and calf and propose percentiles to diagnose the nutritional status of school children of both sexes aged 4-10 years. Methods: We selected intentionally (non-probabilistic) 515 children, 261 children and 254 being girls belonging to Program interaction and development of children and adolescents from the State University of Campinas (Sao Paulo, Brazil). Anthropometric variables were evaluated for weight, height, triceps and subscapular skinfolds and body circumferences of arm, waist and calf, and the% fat determined by the equation proposed by Boileau, Lohman and Slaughter (1985). Through regression method 2 were generated equations to predict the percentage of fat from the body circumferences, the equations 1 and 2 were validated by cross validation method. Results: The equations showed high predictive values ranging with a R2 = 64-69%. In cross validation between the criterion and the regression equation proposed no significant difference (p > 0.05) and there was a high level of agreement to a 95% CI. Conclusion: It is concluded that the proposals are validated and shown as an alternative to assess the percentage of fat in school children of both sexes aged 4-10 years in the region of Campinas, SP (Brazil).

Análise da influência dos fatores posicionais na flexibilidade de uma rede do setor de calçados infantis

Pós-graduação em Engenharia de Produção - FEB

Projeto estrutural do cubo do rotor de uma turbina hidraúlica tipo Kaplan

Pós-graduação em Engenharia Mecânica - FEG

Projeto de uma roda para comporta vagão usando elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analisando a determinação sexual de vertebrados com base em redes de interação entre proteínas

Pós-graduação em Ciências Biológicas (Genética) - IBB

Estimativa espaço-temporal da superfície potenciométrica do sistema aqüífero guarani na cidade de Ribeirão Preto (SP), Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Uso do 210 Pb na cronologia da contaminação de cromo em sedimentos do Ribeirão dos Bagres, região de Franca (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Fatores críticos de baixa efetividade no planejamento estratégico das cidades: um estudo na região metropolitana do vale do paraíba e litoral norte

Pós-graduação em Engenharia Mecânica - FEG

Uma leitura sobre a praia de Iracema - Fortaleza (CE): transformação socioespacial do lugar e suas representações

Pós-graduação em Geografia - IGCE