Influência de defeitos e diferentes processos de fabricação nas propriedades mecânicas finais de cerâmicas

Os materiais cerâmicos são atualmente cada vez utilizados como opção na engenharia mundial. Por se tratar de materiais com alta resistência mecânica, possuem muitas aplicações em diversas áreas, como por exemplo a de mancais, a automotiva (sensores, isoladores, catalisadores, pistões, válvulas, revestimentos), a de implantes biocompatíveis (dentário, substituição óssea, válvulas cardíacas), a de produtos sujeitos ao desgaste (guias), a de refratários (revestimento de equipamento bélico, componentes de fornos), a eletrônica, e outras. Nos processos de fabricação da cerâmica há uma gama de fatores que contribuem para as características do produto final. Devido a isso, muitos pesquisadores têm trabalhado no estudo da influência de determinados defeitos e técnicas de produção de cerâmicas nas características do produto final. Este trabalho tem como objetivo fazer uma revisão bibliográfica de recentes artigos que analisam a influência de fatores como velocidade de queima, surgimento de trincas, porosidade, fases cristalinas, e tamanho de partículas, nas propriedades mecânicas finais das cerâmicas. Pode-se concluir que é possível aperfeiçoar o processo de fabricação da cerâmica a fim de promover as melhores propriedades mecânicas possíveis, conhecendo-se fatores prejudiciais e métodos adequados para se obter o melhor produto final.

Nanoindentation mechanical properties characterization of glassy polymeric carbon treated with ion beam

Phenolic resins when heat treated in inert atmosphere up to 1000 degreesC become glassy polymeric carbon (GPC), a chemically inert and biocompatible material useful for medical applications, such as in the manufacture of heart valves and prosthetic devices. In earlier work we have shown that ion bombardment can modify the surface of GPC, increasing its roughness. The enhanced roughness, which depends on the species, energy and fluence of the ion beam, can improve the biocompatibility of GPC prosthetic artifacts. In this work, ion bombardment was used to make a layer of implanted ions under the surface to avoid the propagation of microcracks in regions where cardiac valves should have pins for fixation of the leaflets. GPC samples prepared at 700 and 1500 degreesC were bombarded with ions of silicon. carbon, oxygen and gold at energies of 5, 6, 8 and 10 MeV, respectively, and fluences between 1.0 x 10(13) and 1.0 x 10(16) ions/cm(2). Nanoindentation hardness characterization was used to compare bombarded with non-bombarded samples prepared at temperatures up to 2500 degreesC. The results with samples not bombarded showed that the hardness of GPC increases strongly with the heat treatment temperature. Comparison with ion bombarded samples shows that the hardness changes according to the ion used, the energy and fluence. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Viscosity, pH, and moisture effect in the porosity of poly(furfuryl alcohol)

The poly(furfuryl alcohol) is highly indicated to obtain advanced carbonaceous materials due mainly to its good carbon yield (around 50%) and a controllable cure reaction. In the processing of some carbonaceous materials, such as monolithic vitreous carbon, it is necessary to make sure that the material has the smallest porosity to be used in nobler applications such as heart valves and aerospace integrated systems. In this manuscript, a design of experiments was used to study the influence of viscosity, pH, and moisture in the porosity of the cured material. This study shows that the moisture exerts a significant influence on the porosity and the trend of the results lead to conclude that lower viscosity and moisture, and the use of non-neutralized poly(furfuryl alcohol) resins lead to obtain materials with better quality. © 2012 Wiley Periodicals, Inc.

Avalição do desfecho clínico da febre reumática durante duas décadas no Hospital das Clínicas de Botucatu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do controle de anticoagulação oral em pacientes portadores de próteses valvares cardícas mecânicas por meio de ambulatório especializado: experiência de 10 anos

Pós-graduação em Bases Gerais da Cirurgia - FMB

Double-lumen catheter in the right jugular vein induces two sub-endothelial abscesses in an unusual place, the transition between the superior vena cava and the right atrium: a case report

Endocarditis is a type of infection that is common in internal medicine wards and in haemodialysis clinics. The location that is most affected are the heart valves. Herein, we report a case of an uncommon abscess, a sub-endothelial abscess between the transition of the superior vena cava and the right atrium. There were several emboli to the lung and foot, and the agent was related to Staphylococcus aureus and a double-lumen catheter. Usually, this type of abscess is located in valves, either the tricuspid valve if related to catheters or injection drug use or the mitral valve if related to other causes. An exhaustive review was made, but we found no information about the location of this abscess and the rarity of the event motivating the report of infection.

Pressure distribution on the frontal disk for turbulent flows in a radial diffuser

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mensuração do volume atrial esquerdo pelo método biplanar de Simpson em cães portadores da doença mixomatosa da válvula mitral

Pós-graduação em Medicina Veterinária - FCAV

Avaliação comparativa do uso da furosemida em bolus ou infusão contínua no tratamento de cães com doença degenerativa valvar

Pós-graduação em Medicina Veterinária - FCAV

O uso de drogas anticoagulantes e antiplaquetárias orais em pacientes cirúrgicos ambulatoriais: revisão de literatura

The oral anticoagulants (AOC) and platelet antiagregants are drugs used for the prevention of thromboembolic phenomena, such as pulmonary embolism in patients with atrial fribrilation heart valves, thrombosis and pulmonary embolism. For patients who are undergoing surgical procedures-dentistry were asked to discontinue the use of anticoagulants until the value of the INR remained = 2.0, that in order to avoid trans and hemorrhages in the postoperative period. However, the AOC can cause the formation of a clot, leading to obstruction of blood pathways. Thus, it became doubtful the medicine for surgery, in which local hemostatic measures would be sufficient to promote hemostasis. Thus, the objective of the review was to evaluate the risk of bleeding in patients AOC users that are subjected to surgical procedures, through a bibliographical survey carried out in relevant clinical studies published between 1990 and 2012, by the MedlinePubMed data. In this review of literature was concluded that the benefit of thromboembolism prevention overcomes the risk hemorrhage, therefore, it is recommended to keep the dose of anticoagulant therapy unchanged for patients undergoing oral surgery and implant dentistry, using appropriate INR levels with the assistance of local hemostatic. In addition, a refined surgical technique should be performed in these patients. With respect to the most invasive oral surgery, with a risk of bleeding, treatment may be necessary in conjunction with the medical staff.

The Heart of the South American Rattlesnake, Crotalus durissus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Delaunay Tetrahedralization of the Heart Based on Integration of Open Source Codes

The Finite Element Method (FEM) is a way of numerical solution applied in different areas, as simulations used in studies to improve cardiac ablation procedures. For this purpose, the meshes should have the same size and histological features of the focused structures. Some methods and tools used to generate tetrahedral meshes are limited mainly by the use conditions. In this paper, the integration of Open Source Softwares is presented as an alternative to solid modeling and automatic mesh generation. To demonstrate its efficiency, the cardiac structures were considered as a first application context: atriums, ventricles, valves, arteries and pericardium. The proposed method is feasible to obtain refined meshes in an acceptable time and with the required quality for simulations using FEM.

Effects of isoflurane on echocardiographic parameters in healthy dogs

Obejective To study the echocardiographic effects of isoflurane at an end-tidal concentration approximating 1.0 times the minimum alveolar concentration (MAC) in healthy unpremedicated dogs.Study design Prospective experimental trial.Animals Sixteen mature mongrel dogs of either sex weighing 11.06 +/- 2.72 kg.Methods After performing a baseline echocardiogram in the awake animal, anesthesia was induced with increasing inspired concentrations of isoflurane via a face mask until tracheal intubation was possible. Following intubation, the end-tidal concentration was decreased to 1.4% for the rest of the anesthetic period. Serial echocardiograms were recorded at 25, 40, and 55 minutes after the end-tidal concentration was reached.Results No changes were observed in heart rate. However, significant decreases were seen in left ventricular end-diastolic diameter (Mean maximal change: 13.8%), interventricular septal thickness during systole (15.2%), interventricular septal thickening fraction (72.2%), left ventricular free wall thickening fraction (63.5%), ejection fraction (39.9%), and fractional shortening (46.7%). In addition, peak flow velocities across mitral, pulmonic, and aortic valves were significantly lower than baseline values. Decreases were also observed in end-diastolic left ventricular volume index (approximately 32.1% from the awake value), stroke index (58.2%), and cardiac index (55.3%) when compared with awake measurements.Conclusions Our results indicate that 1 x MAC isoflurane caused significant myocardial depression in healthy dogs. These changes in myocardial function need to be considered carefully when isoflurane is to be used in dogs with poor cardiovascular reserve.

The effects of anesthesia with a combination of intramuscular xylazine-diazepam-ketamine on heart rate, respiratory rate and cloacal temperature in roosters

Objective To examine the anesthetic effects of a xylazine-diazepam-ketamine (XDK) combination in roosters.Study design Prospective experimental trial.Animals Six healthy white Leghorn roosters weighing 2.03 +/- 0.08 kg.Methods Each rooster was pre-medicated with xylazine (3 mg kg(-1), IM) and after 15 minutes anesthesia was induced with a diazepam (4 mg kg(-1)) and ketamine (25 mg kg(-1)) combination injected into the pectoral muscles. Heart and respiratory rates were recorded before anesthesia and every 15 minutes after induction for 165 minutes. Cloacal temperature was measured before and 15 minutes after pre-medication and every 75 minutes thereafter during anesthesia. Quality of induction and recovery were scored subjectively; duration of loss of righting reflex, abolition of response to a painful stimulus and palpebral reflex were also recorded.Results Intramuscular injection of xylazine smoothly induced loss of the righting reflex within 3-4 minutes. Loss of response to a painful stimulus occurred at 13.1 +/- 2.9 minutes (mean +/- SD) after the administration of the D-K combination, and lasted for 63.0 +/- 5.3 minutes. Roosters anesthetized with this combination had a significant decrease in heart and respiratory rates and cloacal temperature. The recovery period lasted for up to 4 hours (227.5 +/- 15.4 minutes). Quality of recovery was satisfactory for four roosters but excitation was noted in two birds.Conclusions and clinical relevance The XDK combination was a useful anesthetic technique for typhlectomy in roosters. Nevertheless this drug combination should be used with caution and cardiopulmonary parameters monitored carefully. Under the conditions of this experiment it was associated with a decreased cloacal temperature and prolonged recoveries.

Hematological values and body, heart and liver weights of male and female broiler embryos of young and old breeder eggs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)