Micromorphologic assessment of CVD (chemical vapor deposition) and conventional diamond tips and their cutting effectiveness

The aim of this study was to compare the micromorphology of CVD diamond tips coupled to ultrasound with conventional high speed diamond tips after cavity preparations, and to measure the width and depth of the cavities obtained. Two hundred bovine teeth were divided into 20 subgroups. Each of the diamond tips (10 CVD and 10 conventional) were used to prepare 10 standardized cavities, using an apparatus that controlled the time (t: 27 s), speed (5.3 mm/s) and load (0.012 KGF) of the tip against the teeth during preparation. The unused and the used (after one, five and 10 preparations) tips were analyzed by scanning electronic microscopy. The images were randomly assessed by 3 examiners with regard to the presence or absence of micromorphologic alterations. Cavity measurements were made after visualization under a stereoscopic microscope. Cavity widths and depths were analyzed by the ANOVA Factorial test (p < 0.05). The CVD diamond tips presented less wear than the conventional tips after all the cavity preparations performed, but produced shallower cavities that were equivalent in width to those made by conventional tips after the fifth preparation. CVD diamond tips may be suggested as an alternative to conventional diamond tips due to their conservative preparation and greater longevity.

Cutting characteristics of dental diamond burs made with CVD technology

The aim of this study was to determine the cutting ability of chemical vapor deposition (CVD) diamond burs coupled to an ultrasonic dental unit handpiece for minimally invasive cavity preparation. One standard cavity was prepared on the mesial and distal surfaces of 40 extracted human third molars either with cylindrical or with spherical CVD burs. The cutting ability was compared regarding type of substrate (enamel and dentin) and direction of handpiece motion. The morphological characteristics, width and depth of the cavities were analyzed and measured using scanning electron micrographs. Statistical analysis using the Kruskal-Wallis test (p < 0.05) revealed that the width and depth of the cavities were significantly greater when they were prepared on dentin. Wider cavities were prepared when the cylindrical CVD bur was used, and deeper cavities resulted from preparation with the spherical CVD bur. The direction of handpiece motion did not influence the size of the cavities, and the CVD burs produced precise and conservative cutting.

Influence of CVD diamond tips and Er:YAG laser irradiation on bonding of different adhesive systems to dentin

Aim: The aim of this study was to compare the microtensile bond strength of three adhesive systems, using different methods of dentin preparation. Materials and methods: A hundred and eight bovine teeth were used. The dentin from buccal face was exposed and prepared with three different methods, divided in 3 groups: Group 1 (DT)- diamond tip on a high-speed handpiece; Group 2 (CVD)-CVD tip on a ultrasonic handpiece; Group 3 (LA)-Er: YAG laser. The teeth were divided into 3 subgroups, according adhesive systems used: Subgroup 1-Adper Single Bond Plus/3M ESPE (SB) total-etch adhesive; Subgroup 2-Adper Scotchbond SE/3M ESPE (AS) selfetching adhesive; Subgroup 3-Clearfil SE Bond/Kuraray (CS) selfetching adhesive. Blocks of composite (Filtek Z250-3M ESPE) 4 mm high were built up and specimens were stored in deionized water for 24 hours at 37°C. Serial mesiodistal and buccolingual cuts were made and stick-like specimens were obtained, with transversal section of 1.0 mm2. The samples were submitted to microtensile test at 1 mm/min and load of 10 kg in a universal testing machine. Data (MPa) were subjected to ANOVA and Tukey's tests (p < 0.05). Results and conclusion: Surface treatment with Diamond or CVD tips associated with Clearfil SE Bond adhesive produced significantly lower bond strength values compared to other groups. Surface treatment with Er: YAG laser associated with Single Bond Plus or Clearfil SE Bond adhesives and surface treatment with CVD tip associated with Adper Scotchbond SE adhesive produced significantly lower bond strength values compared to surface treatment with diamond or CVD tips associated with Single Bond Plus or Adper Scotchbond SE adhesives. Clinical significance: Interactions between laser and the CVD tip technologies and the different adhesive systems can produce a satisfactory bonding strength result, so that these associations may be beneficial and enhance the clinical outcomes.

Caracterização do diamante CVD depositado sob atmosfera com adição de baixa concentração de N2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das características física do filme diamante CVD para utilização em coletores solares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desgaste de dressadores de ponta única fabricados com diamantes cvd nacionais

This study attempted to observe the performance of three types of diamonds, two natural and one synthetic, to determine which features longer life and greater wear than the others. The methodology employed in this study was to dressed an aluminum oxide grinding wheel, and every twenty paces with a advance of depth dressing of 40 µm per passes, take an image of the tip in a horizontal position and the other in the vertical position of this diamond in a stereoscopic. Thereafter, the dresser was replaced in the rectifier to conduct a new dressing. The criteria to completion of the test was the spark generated by the grinding wheel contact with the base of the dresser, which indicates the end of the contact with the diamond wheel. After the tests, was calculated the areas worn of each diamond in accordance with each image obtained through the aid of a graphics software. The data were then arranged in graphs.

Análise de dissipadores de calor com filmes de diamante CVD

Dissipadores de calor recobertos com filmes de diamante CVD foram desenvolvidos para acoplar a semicondutores, utilizando-se do Laboratório de Deposição de Filmes de Diamante CVD, na UNESP - Campus de Guaratinguetá e o Laboratório de Diamantes da Universidade São Francisco, em Itatiba, SP. Analisou-se o filme de diamante CVD sobre o silício, para emprego como dissipador de calor, porque o filme de diamante CVD pode ter o valor da condutividade térmica até cinco vezes superior ao do cobre e de dez vezes a do alumínio. Os filmes foram obtidos via deposição através de reator de filamento quente, trabalhando-se com vários filamentos retilíneos em paralelo, resultando assim em um processo que visou obter um filme mais uniforme e com grande área de deposição. Os dados para análises da composição química superficial dos filmes foram obtidos por Difração de Raios-X, Dispersão de Energia de Raios-X e para a verificação da morfologia e espessura do filme foi utilizada a Microscopia Eletrônica de Varredura. Para a verificação do comportamento da temperatura sobre o dissipador com o filme de diamante CVD foi utilizada uma câmera de imagem termográfica, marca Fluke, modelo Ti 40 FT. Foram obtidos filmes de 2 e 10 ?m sobre o silício. Estas espessuras ainda não oferecem um desempenho mecânico que o torne autosustentado. Do ponto de vista de desempenho térmico as análises mostraram que, mesmo com pequena espessura, o filme de diamante CVD apresentou bom resultado experimental. Os principais desafios de construção para esse dissipador de calor são a obtenção do filme com espessura acima de um mm e a garantia da qualidade do filme com a repetitividade do processo em cujo caso torna-se necessário definir as dimensões do dissipador antes da deposição do filme.

Innovation in pediatric surgery: the use of ultrasonic CVD tips: case report

The non-eruption of teeth due to highly keratinized gingival mucosa is a frequent event in the pediatric dentistry, which harms the oral aesthetics and function. A surgical excision of the involved area is indicated, exposing the non-erupted tooth. This procedure involves anesthesia and cutting instruments that may increase the fear and anxiety in young patients. The use of new technologies has avoided these instruments and has promoted more comfort to the patients. This study presents clinical cases in which gingivectomy was performed using the innovative method with an ultrasound-activated CVD tip. It was concluded that this method presented effectiveness, promoted more comfort, and less fear to the patients, making its use a viable alternative to pediatric surgery.

Comparação de desgaste para dois tipos diferentes de diamantes sintéticos CVD em sua utilização para a dressagem de ponta única de rebolos de óxido de alumínio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hypolipemic and antioxidant activities from Tamarindus indica L. pulp fruit extract in hypercholesterolemic hamsters

Dietary modifications may significantly reduce cardiovascular disease (CVD) risk factors, including cholesterol and atherosclerosis. The present study addressed the effects of the crude extract from the pulp fruit of Tamarindus indica L. on lipid serum levels and early atherosclerotic lesions in hypercholesterolemic hamsters in vivo, and the extract's antioxidant action, in vitro. Animals were fed on either chow or atherogenic diet during 10 weeks and concomitantly received either water or T indica L. extract for drinking. Treatment of hypercholesterolemic hamsters with the T. indica pulp fruit extract (5%) led to a decrease in the levels of serum total cholesterol (50%), non-HDL cholesterol (73%) and triglyceride (60%), and to an increase of high-density lipoprotein (HDL) cholesterol levels (61%). In vitro, the extract presented radical scavenging ability, as assessed by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and superoxide radicals assays, and led to decreased lipid peroxidation in serum, as assessed by the thiobarbituric acid reactive substances (TBARS) assay. In vivo, the extract improved the efficiency of the antioxidant defense system, as assessed by the superoxide dismutase, catalase and glutathione peroxidase activities. Together these results indicate the potential of tamarind extracts in diminishing the risk of atherosclerosis development in humans. (c) 2005 Elsevier Ltd. All rights reserved.

Frequência de fatores de risco cardiovascular em voluntários participantes de evento de educação em saúde

INTRODUCTION. Cardiovascular diseases (CVD) are the main cause of death in Brazil.OBJECTIVE. To evaluate the frequency of CVD risk factors In a population attending a health education community event.METHODS. Retrospective study that included 428 completed forms with clinical and demographic information of volunteers attending a public event, in May, 2006. Data were expressed by means and standard deviation or proportions and compared by Student's t test or Chi-square test. Associations between Arterial Hypertension (AH), Diabetes Mellitus (DM) and clinical variables were analyzed by multinomial logistic regression. Significance level was p<0.05.RESULTS. Mean age was 57 +/- 14years, and women represented 58% of the total population. The main cardiovascular risk factors were AH (39.5%), DM (15.4%) and dyslipidemia (25.89%). The frequency of unawareness about these risk factors was respectively 8.4%, 17.5% and 33.1%.. Family history of CVD was reported by 41% while only 67% reported having any information about DM or dyslipidemia. Among obese individuals (IMC >= 30 Kg/m2, 27.3% of the population), systolic blood pressure (133 +/- 16mmHg), diastolic blood pressure (84 +/- 11.5mmHg) and casual glycemia (124 +/- 52.5mg/dl) were higher when compared to non-obese (p<0.05). There was a significant association between obesity and dyslipidemia (p=0.04). Age and IMC were independently associated with AH and DM.CONCLUSION. The high frequency of modifiable cardiovascular risk factors in this population suggests the need for educational programs to promote primary prevention, mainly for the elderly and overweight. [Rev Assoc Med Bras 2009; 55(5): 606-10]

Biological differences between reflux stimulated proliferative stomal lesions and N-methyl-N '-nitro-N-nitrosoguanidine induced carcinomas in Wistar rats.

The morphology and evolution of epithelial lesions that developed at a gastrojejunal stoma due to reflux of duodenal contents were compared with MNNG-induced carcinomas in the pyloric mucosa of rats in a long term experiment. Random bred male Wistar rats were given MNNG in drinking water (100 mg/l) for 12 weeks and then one group was submitted to a gastrojejunal anastomosis at the greater curvature in the oxyntic mucosa, Untreated rats underwent either gastrojejunostomy or gastrotomy. The animals were killed at the 24th and 66th weeks of the experiment. The lesions obtained in the pyloric mucosa and in the mucosa of the gastrojejunal stoma were analyzed histologically using hematoxylin and eosin staining and immunohistochemistry for pepsinogen isoenzyme 1. Duodenal reflux induced proliferative lesions at the gastrojejunal junction that increased in incidence and size with time. Histologically they consisted of benign epithelial proliferation of gastric type. No evidence of malignant transformation within the gastric components of the proliferative lesions at the gastrojejunal stoma was observed even at the 66th week, Adenocarcinomas induced by MNNG in the pyloric mucosa increased in size during the experiment and were morphologically and histochemically distinct from the proliferative lesions at the gastrojejunal junction. In conclusion, proliferative lesions at the gastrojejunal stoma stimulated by duodenal reflux are biologically distinct from adenocarcinomas induced by MNNG in the pyloric mucosa. They do not seem to be precursor lesions of gastric carcinogenesis, as they do not undergo malignant transformation even after long-term, up to 66 weeks, follow-up. (C) 1999 Elsevier B.V. Ireland Ltd. All rights reserved.