Estudo de caso de controle estatístico de processo: levantamento estatístico de defeitos em molduras

This graduate work approaches the study of Statistical Process Control - SPC, in a stage production of an industrial frame, aiming to use the tool of statistical process control (SPC) to assess the process capability. Where the process needs improvement as well not meet the specifications. Assessing the needs that the company needs to improve quality management, and the difficulties they present during the implementation of the CEP. The present study is to use the method of case study. The results are presented through study of the level of defects using Pareto diagrams and control chart by - (p) fraction defective, and checking the capacity and stability of the process using control charts and histograms XbarraR. The process demonstrated the need for improvements in process and quality management. At the end of the work are presented suggestions for improving the quality system of the company

Estudo e seleção de um aparelho de ar condicionado para ônibus

The study and selection of an equipment of air conditioner for any type of environment, should be made without overestimate or undersizing the project. The undersizing does not provide an adequate comfort temperature if the environment is too hot because the air conditioner does not remove all the heat necessary in the environment. But if the project is oversized, energy consumption is higher and there is an unnecessary cost. To prevent these failures is necessary to make a calculation of the thermal load on the environment and choose the equipment that has a higher cooling capacity than the calculated heat load and closer to the calculated heat load. In this graduate work will be chosen an air-conditioned equipment for bus, showing the calculations made for the thermal load for various types of heat gain in this type of vehicle. The thermal load on vehicles is more complicated to calculate than in areas because there are several factors that vary with the movement of the vehicle. It will also explain the compression refrigeration cycle, which is the cooling system used in vehicles because it is weightless, compact and lower cost. From the calculated heat load, it will be chosen an air conditioner that best suits the project and, finally, a brief presentation of the selected equipment will be made

Melhoria de processos de serviços prestados em assistência técnica

Currently the service sectors have an increasingly important role in the productive sector because they can represent a great advantage to the consumer. In this graduate work a study was conducted with the objective of process improveme nt services in the sector of technical assistance in a factory machinery and equipment. Through process mapping, through the technical blueprint, and time study were able to identify opportunities for improvement for reducing the time customer service, as well as the proposed performance indicators for the service

Análise fractal de fraturas em regime linear elástico: modo I de carregamento

For the development of this graduate work of fractal fracture behavior, it is necessary to establish references for fractal analysis on fracture surfaces, evaluating, from tests of fracture tenacity on modes I, II and combined I / II, the behavior of fractures in fragile materials, on linear elastic regime. Fractures in the linear elastic regime are described by your fractal behavior by several researchers, especially Mecholsky JJ. The motivation of that present proposal stems from work done by the group and accepted for publication in the journal Materials Science and Engineering A (Horovistiz et al, 2010), where the model of Mecholsky could not be proven for fractures into grooved specimens for tests of diametric compression of titania on mode I. The general objective of this proposal is to quantify the distinguish surface regions formed by different mechanisms of fracture propagation in linear elastic regime in polymeric specimens (phenolic resin), relating tenacity, thickness of the specimens and fractal dimension. The analyzed fractures were obtained from SCB tests in mode I loading, and the acquisition of images taken using an optical reflection microscope and the surface topographies obtained by the extension focus method of reconstruction, calculating the values of fractal dimension with the use of maps of elevations. The fractal dimension was classified as monofractal dimension (Df), when the fracture is described by a single value, or texture size (Dt), which is a macroscopic analysis of the fracture, combined with the structural dimension (Ds), which is a microscopic analysis. The results showed that there is no clear relationship between tenacity, thickness and fractal values for the material investigated. On the other hand it is clear that the fractal values change with the evolution of cracks during the fracture process ... (Complete abstract click electronic access below)

Proposta de recuperação e manejo de nascente em área rural do município de Álvares Machado – SP

The lack of proper planning in intervention works of runoff water on rural properties and rural public roads leads to economic damage and loss of environmental quality. The impact of the action without technical base is soil erosion, siltation of water sources, loss of the quality and availability of water, invalidating areas for cultivation and livestock. The conservation of headwaters requires beyond regeneration of the environmental characteristics the repair and management of the degraded watercourse in order to control erosion. This graduate work in Environmental Engineering from Universidade Estadual Paulista Julio de Mesquita Filho - UNESP Presidente Prudente proposes a headwater recuperation and management in rural area of Álvares Machado municipality, São Paulo State, through the method of deep drainage applied to the case of a rural road near the outcrop of water. This technique consists in the installation of draining structures in sub-areas of the road surface, or sub-gutter and/or in the platform border in order to conduct the underground flow of water and reduce the loss of sediment in water flow. Therefore, was performed a historic study of use and occupation of land in the municipality of Álvares Machado, portraying transformations of the landscape caused by human action. Geology, geomorphology, pedology and hydrogeology data were collected from the study area in order to establish the conditions that led into the current situation of degradation and formulate an effective intervention strategy for civil works

Fabricação de rodas: uma análise comparativa

In our country, the majority of freight and people by road happens municipal, state and federal. Thus, the heavy vehicles like buses and trucks are the main means of transporting people and cargo. This graduate work aims to study the process of manufacturing wheels for trucks, because we can see the lack of literature on the manufacturing process of wheels and also the importance of the processes used to manufacture wheels, such as lamination, stamping, puckering, machining, welding and painting

Iluminação de exteriores utilizando tecnologia LED: estudo de caso

This Graduate Work aims to exhibit the analyze of the applicability of LED technology in a real outdoor lighting situation, and this project’s illumination solution is compared with the initial proposal, the sodium vapor lamps. What is studied is an outdoor area, like the roads and parking lots of a plant. A light planning software is used for this comparison, and the results are displayed instantly, allowing rapid analysis of the project through a simulation. The medium illuminance is the same in both solutions for this case study and minimum rates set as standard were observed then the analysis are appropriate in this project. Various aspects are considered in order to obtain a comprehensive analysis of this project, such as economic, environmental and quality of lighting. LED technology in outdoor lighting is presented in its infancy, but promising. Solid state lamps show great advantages when compared with other technologies, such as discharge lamps, however there are some disadvantages tied to new products that are expected to be overcome with technological development and increased production

Estudo de caso de controle estatístico de processo: levantamento da variação de espessura de tábuas de pinus

This graduate work approaches the study of Statistical Process Control - SPC, in a stage production of an industrial frame, aiming to use the tool of statistical process control (SPC) to assess the process capability. Where the process needs improvement as well not meet the specifications. Assessing the needs that the company needs to improve quality management, and the difficulties they present during the implementation of the CEP. The present study is to use the method of case study. The results are presented through study, and checking the capacity and stability of the process using control charts XbarraR. The process demonstrated the need for improvements in process and quality management. At the end of the work are presented suggestions for improving the quality system of the company

Evolução da tecnologia móvel até 2013

In this paper expounds on the major phases or generations of the evolutionary process of wireless mobile communication, emphasizing their characteristics and changes over time. The main benefit of this process is the rate of data transfer remembering capacity spectral and methods of harnessing and improving its efficiency. The current network today is 4G and the technologies developed over the following requirements of the ITU are: Long Term Evolution Advanced (LTE-Advanced) and WirelessMAN-Advanced as part of the WiMAX IEEE 802.16m also described in this graduate work

Projeto e concepção de um quadcopter utilizando o controle PID

The present work refers to the design, conception and development of a quadcopter based on PID controllers, a widespread microcontroller on the market was being implemented, the Arduino. Also made use of LabVIEW programming tool from National Instruments company for the quadcopter control and telemetry. For the control, LabVIEW software acquired the joystick commands, making the necessary adjustments to the perfect interpretation by microcontroller on the quadcopter and adjusts the parameters of PID controllers. For telemetry, data relating to quadcopter behavior are received, interpreted and presented in an intuitive user interface. In the first part of this graduate work presents the theoretical background on the subject, with a brief history about the quadcopters, followed by the main projects in the academic and commercial matters. Also are presented the theories of communications used in the design and PID control. Then an overview of the dynamic and mathematical model is demonstrated. Having done this, the physical and computer components required to complete the project are showed and the results are achieved consequently. Finally, a conclusion is made taking into account the results obtained. In this work will be presented the PID control of quadcopter translational movements only to roll and pitch movements

Redução dimensional de partículas de spin s=0,s=1 e s=2 via mecanismo de Kaluza-Klein

In this graduate work we will perform the dimensional reduction of particles of spin s=0, s=1 and s=2 via Kaluza Klein mechanism. The method of Kaluza-Klein dimensional reduction is introduced by the dimensional reduction from D to D

Introdução aos sistemas aviônicos de rádio navegação

This work is focused on the subject of air radio navigation systems embedded on aircraft and in the ground stations. Initially is presented a historical context and motivation of the chosen theme. In the following chapters the basics avionics systems are presented, ADF, VOR, DME and ILS such that there is a deepening of electronics theory behind the operation of each system. In this graduate work were presented theories involved in systems such as the definition and creation of radio waves, the frequency spectrum used by each system, the modulation and demodulation of waves, the operating block diagrams of embedded receiver in the aircraft and the terrestrial source station, and the errors involved in the use of each system