Poly(glutamic acid) nanofibre modified glassy carbon electrode: Characterization by atomic force microscopy, voltammetry and electrochemical impedance

Glassy carbon electrodes (GCE) were modified with poly(glutamic acid) acid films prepared using three different procedures: glutamic acid monomer electropolymerization (MONO), evaporation of poly(glutamic acid) (PAG) and evaporation of a mixture of poly(glutamic acid)/glutaraldehyde (PAG/GLU). All three films showed good adherence to the electrode surface. The performance of the modified GCE was investigated by cyclic voltammetry and differential pulse voltammetry, and the films were characterized by atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS). The three poly(glutamic acid) modified GCEs were tested using the electrochemical oxidation of ascorbic acid and a decrease of the overpotential and the improvement of the oxidation peak current was observed. The PAG modified electrode surfaces gave the best results. AFM morphological images showed a polymeric network film formed by well-defined nanofibres that may undergo extensive swelling in solution, allowing an easier electron transfer and higher oxidation peaks. (C) 2007 Elsevier Ltd. All rights reserved.

Multifunctional antitumor magnetite/chitosan-l-glutamic acid (core/shell) nanocomposites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Approach on the Electrochemical Reactivity of Poly-L-Glutamic Acid Against Doxorubicin and Its Application in the Development of a Voltammetric Sensor

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preconcentration of rutin at a poly glutamic acid modified electrode and its determination by square wave voltammetry

The voltammetric determination of rutin in 0.04 mol l(-1) B-R buffer (pH 4.0) by square wave voltammograms (+0.41 V vs. Ag/AgCl(sat.)) at a poly glutamic acid modified glassy carbon electrode was found to be several orders of magnitude lower than that on a bare glassy carbon electrode. Rutin can be preconcentrated on the films of poly glutamic acid and presented linear relationship from concentration of 7 x 10(-7) to 1 x 10(-5) mol l(-1) in 0.04 mol l(-1) B-R buffer pH 4.0. The method was successfully applied to the determination of rutin in pharmaceutical formulation without any pretreatment.

Application of a glassy carbon electrode modified with poly(glutamic acid) in caffeic acid determination

Glassy carbon electrodes were coated with films of poly( glutamic acid) ( PG), and the modified electrode proved to be very effective in the oxidation of caffeic acid. The performance of the film was also tested with ascorbic acid, coumaric acid, ferulic acid, sinapic acid and chlorogenic acid. At pH 5.6, all the hydroxycinnamic acids yield a higher peak current intensity when oxidized after incorporation in the PG-modified electrode, and only the oxidation of ascorbic acid exhibits overpotential reduction. At pH 3.5 only caffeic and chlorogenic acid are incorporated in the modified electrode and exhibit a well-defined oxidation wave at +0.51 V and +0.48 V, which is the base for their determination. Linear calibration graphs were obtained from 9 x 10(-6) mol L-1 to 4 x 10(-5) mol L-1 caffeic acid by linear voltammetric scan and from 4 x 10(-6) mol L-1 to 3 x 10(-5) mol L-1 by square wave voltammetric scan. The method was successfully applied to the determination of caffeic acid in red wine samples without interference from other hydroxycinnamic acids or ascorbic acid.

Serum titres of anti-glutamic acid decarboxylase-65 and anti-IA-2 autoantibodies are associated with different immunoregulatory milieu in newly diagnosed type 1 diabetes patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phytogenic additives and glutamine plus glutamic acid in broiler diets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of silica surface on luminescence properties of tb3+-glutamic acid.

We studied the effect of silica surface on luminescence properties of terbium complex by spectroscopy characterization, where microparticles of mesoporous silica type MSU-X was prepared. We used silica with different surface: calcined, washed, functionalized with 3- aminopropyl-triethoxysilane (APTES), and 3-glycidoxypropyl-trimethoxysilane (GPTMS); impregnated with Tb3+-glutamic acid complex. The obtained materials were characterized by scanning electron microscopy, porosity measurements, small-angle X-ray scattering, as structural characterization; Fourier transform infrared and luminescence spectroscopy, as spectroscopy characterization. Finally, we observed that functional groups at the silica surface lead to changes on luminescent properties of the final materials. The observed shift of the absorption and emission bands can be assigned to the effect of the functional groups of mesoporous silica.

Characterization of a new platelet aggregating factor from crotoxin Crotalus durissus cascavella venom

In this article we investigated the platelet aggregating activity of whole crotoxin and its subunits isolated from Crotalus durissus cascavella venom. During the purification protocols of the venom, using HPLC molecular exclusion, we detected the presence of two different serine protease activities in the gyroxin fraction, and another in the crotoxin fraction, which induced strong and irreversible platelet aggregation, in addition to blood coagulation. From crotoxin, we isolated PLA(2), crotapotin (both fractions corresponding approximately 85% of whole crotoxin) and another minor fraction (F20) that exhibited serine protease activity. After a new fractionation on reverse phase HPLC chromatography, we obtained three other fractions named as F201, F202 and F203. F202 was obtained with high degree of molecular homogeneity with molecular mass of approximately 28 kDa and a high content of acidic amino residues, such as aspartic acid and glutamic acid. Other important amino acids were histidine, cysteine and lysine. This protein exhibited a high specificity for BApNA, a Michaelis-Menten behavior with Vmax estimated in 5.64 mu M/min and a Km value of 0.58 mM for this substrate. In this work, we investigated the ability of F202 to degrade fibrinogen and observed alpha and beta chain cleavage. Enzymatic as well as the platelet aggregation activities were strongly inhibited when incubated with TLCK and PMSF, specific inhibitors of serine protease. Also, F202 induced platelet aggregation in washed and platelet-rich plasma, and in both cases, TLCK inhibited its activity. The N-terminal amino acid sequence of F202 presented a high amino acid sequence homology with other thrombin-like proteins, but it was significantly different from gyroxin. These results showed that crotoxin is a highly heterogeneous protein composed of PLA(2), thrombin-like and other fractions that might explain the diversity of physiological and pharmacological activities of this protein.

Role of neurokinin-1 expressing neurons in the locus coeruleus on ventilatory and cardiovascular responses to hypercapnia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Solubilização do fosfato de ferro em meio de cultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genomics-based design of defined growth media for the plant pathogen Xylella fastidiosa

Based on the genetic analysis of the phytopathogen Xylella fastidiosa genome, five media with defined composition were developed and the growth abilities of this fastidious prokaryote were evaluated in liquid media and on solid plates. All media had a common salt composition and included the same amounts of glucose and vitamins but differed in their amino acid content. XDM1 medium contained amino acids threonine, serine, glycine, alanine, aspartic acid and glutamic acid, for which complete degradation pathways occur in X fastidiosa; XDM2 included serine and methionine, amino acids for which biosynthetic enzymes are absent, plus asparagine and glutamine, which are abundant in the xylem sap; XDM3 had the same composition as XDM2 but with asparagine replaced by aspartic acid due to the presence of complete degradation pathway for aspartic acid; XDM4 was a minimal medium with glutamine as a sole nitrogen source; XDM5 had the same composition as XDM4, plus methionine. The liquid and solidified XDM2 and XDM3 media were the most effective for the growth of X. fastidiosa. This work opens the opportunity for the in silico design of bacterial defined media once their genome is sequenced. (C) 2002 Federation of European Microbiological Societies. Published by Elsevier B.V. B.V. All rights reserved.

Proteome of the phytopathogen Xanthomonas citri subsp citri: a global expression profile

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestibilidade do extrato de leveduras em frangos de corte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelos matemáticos para estimar as exigências de lisina digestível para aves de corte ISA Label

O objetivo neste estudo foi avaliar diferentes modelos ajustados às respostas de ganho de peso obtidas em experimento com aves da linhagem ISA Label no período de 1 a 28 dias de idade. Foram utilizados 480 pintos de ambos os sexos, distribuídos em delineamento inteiramente casualizado, em arranjo fatorial 4 X 2 (níveis de lisina X sexo), com três repetições, com 20 aves por unidade experimental. Uma ração basal foi formulada para atender às exigências das aves, exceto em lisina. Essa ração foi suplementada com L-lisina HCl em substituição ao ácido L-glutâmico, resultando em rações experimentais isonitrogênicas e isoenergéticas contendo 0,85; 0,97; 1,09 e 1,21% de lisina digestível. As respostas de ganho de peso foram ajustadas de acordo com os níveis de lisina da ração pelos modelos Linear Reponse Plateau (LRP), segmentado de duas inclinações, polinomial quadrático e exponencial. A primeira intersecção da equação quadrática com o platô do LRP também foi utilizado para estimar o nível ótimo. Os níveis de lisina digestível estimados pelos modelos LRP, segmentado e quadrático, foram 0,999; 1,010 e 1,116%, respectivamente. Na combinação do modelo quadrático com o LRP, a estimativa da exigência de lisina digestível foi de 1,041%. O modelo exponencial proporcionou estimativa de 1,066%, considerando 95% da resposta assintótica. Com base nos custos com alimentação, esse mesmo modelo gerou estimativas de 1,000 e 1,030% quando o custo do quilograma de L-lisina HCl foi R$ 8,50 e R$ 6,50, respectivamente. Considerando as limitações de cada um dos modelos propostos, o procedimento para estimar as exigências de lisina digestível pela primeira intersecção da equação quadrática com o platô do LRP foi o mais adequado para melhorar o ganho de peso das aves quando variáveis econômicas não foram consideradas.