Utilização de análise de segregantes agrupados na identificação de marcadores ligados a genes que controlam a resistência à ferrugem (Puccinia psidii Winter) em Eucalyptus sp.

Devido a grande importância da cultura de Eucalyptus no Brasil, empresas do setor florestal têm buscado através de programas de melhoramento genético, reduzir as perdas de produção e atender a demanda do mercado de papel e celulose. Um exemplo, é a busca por genes de resistência a doenças, principalmente a ferrugem causada por Puccinia psidii Winter, que resulta em redução da produtividade em plantas altamente suscetíveis. No presente trabalho, mudas de Eucalyptus pertencentes a uma geração F1, provenientes do cruzamento controlado entre parentais híbridos E. grandis X E. urophylla, sendo eles resistente e suscetível, foram inoculadas com Puccinia psidii em casa de vegetação e acompanhadas até o aparecimento dos sintomas da ferrugem. Foram classificadas, em dois grupos: resistentes (ausência de sintomas) e suscetíveis (presença de sintomas e esporulação). As amostras de DNA foram comparadas com o uso de marcadores moleculares associado ao método de BSA (Bulked Segregant Analysis). O polimorfismo entre os grupos foi geneticamente relacionado ao loco que determina a característica de resistência ou sucetibilidade. Dentre os 720 primers testados, 19 foram polimórficos, porém, apenas o marcador AK 01 manteve-se presente, quando testado em todos os indivíduos da população, mostrando-se a uma distância genética estimada de 20 cM em repulsão ao gene de resistência.

Utilização de bulked segregant analysis na identificação de marcadores ligados a genes que controlam a resistência à ferrugem (Puccinia psidii Winter) em Eucalyptus sp

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Variabilidade genética de caracteres relacionados ao enraizamento de estacas de progênies e clones de guanandi (Calophyllum brasiliense Cambess

Pós-graduação em Ciência Florestal - FCA

Dimensões do orifício de abastecimento e área real de sauveiros de atta sexdens rubropilosa (Hymenoptera: Formicidae), precisão dos métodos e implicações no controle com iscas formicidas

Pós-graduação em Ciência Florestal - FCA

Efeito do espaçamento de plantio na biomassa do fuste de um clone híbrido interespecífico de Eucalyptus grandis e Eucalyptus urophylla

Pós-graduação em Ciência Florestal - FCA

Variabilidade genética em progênies de polinização aberta de Eucalyptus urophylla

Pós-graduação em Ciência Florestal - FCA

Rhizospheric streptomycetes as potential biocontrol agents of Fusarium and Armillaria pine rot and as PGPR for Pinus taeda

Pinus taeda is one of the main timber trees in Brazil, occupying 1.8 million ha with an annual productivity of 25-30 m(3) ha(-1). Another important species is Araucaria angustifolia, belonging to the fragile Rainforest biome, which for decades has been a major source of timber in Brazil. Some diseases that affect the roots and/or the stem of these trees and cause "damping-off" of the seedlings, with economic and environmental losses for the forest sector, are caused by the plant pathogenic fungi Fusarium sp. or Armillaria sp. This research project intended to isolate actinobacteria from the Araucaria rhizosphere, which present an antagonistic effect against these fungi. After the selection of the best pathogen inhibitors, morphologic characteristics, enzyme production, and their effect on the growth of Pinus taeda were studied. The actinobacteria were tested for their antagonistic capacity against Fusarium sp. in Petri plates with PDA as substrate. The inhibition zone was measured after 3, 5, 7, and 10 days. Of all the isolates tested, only two of them maintained inhibition zones up to 4 mm for 10 days. The inhibition of Armillaria sp. was tested in liquid medium and also in Petri dishes through the evaluation of the number of the fungal rhizomorphs in dual culture with the actinobacteria. It was found that all five isolates were able to inhibit the rhizomorph production, with the best performance of the isolate A43, which was capable of inhibiting both fungi, Fusarium and Armillaria. In a greenhouse experiment, the effect of five isolates on the growth of Pinus taeda seedlings was tested. Plant height, stem diameter, root and shoot dry matter were determined. The Streptomyces isolate A43 doubled plant growth. These results may lead to the development of new technologies in the identification of still unknown bacterial metabolites and new management techniques to control forest plant diseases.

Variação genética e desempenho de progênies de Pinus caribaea var. hondurensis para produção de madeira e resina

Pós-graduação em Agronomia - FEIS

Regeneração natural do componente arbóreo após a mortalidade de um maciço de taquara em um fragmento de floresta ombrófila mista em Lages - SC

The present study aimed to analyze the floristic and structural descriptors of tree species natural regeneration in a forest sector with synchronized bamboo (Merostachys multiramea Hackel) die-off (CT) and an adjacent area with continuous canopy cover (ST) in an araucaria forest fragment in the municipality of Lages, Santa Catarina state. A total of 14, 5x5m, plots (six plots in CT sector and eight in ST sector) were allocated, where all tree species regenerative individual with circumference at breast height smaller than 15cm and height higher than 25cm was measured (diameter at soil level) and identified. The richest families were: Myrtaceae (nine), Solanaceae (six) and Aquifoliaceae (four). The Shannon Diversity Index in ST and CT sectors were respectively 2.73 and 2.31. The species with the highest importance values in CT sector were Solanum variabile, Piptocarpha angustifolia, Mimosa scabrella, Jacaranda puberula and Solanum pseudoquina. In ST sector, the species with highest importance values were Myrsine lorentziana, Casearia decandra, Cinnamodendron dinisii, Drimys brasiliensis and Ilex paraguariensis. The results showed that the synchronized bamboo die-off influenced the spatial variation in the floristic and structural descriptors of the tree species natural regeneration.

Avaliação do desgalhador florestal de discos em função de diferentes teores de umidade da madeira de eucalipto

Pós-graduação em Ciência Florestal - FCA

Utilização de redes neurais artificiais aplicadas na discriminação de padrões de doenças florestais

Pós-graduação em Ciência Florestal - FCA

Dinâmica populacional e manejo de leptocybe invasa (Hymenoptera: Eulophidae) em plantações de eucalipto

Pós-graduação em Ciência Florestal - FCA

A influência das variáveis do lixamento tubular na qualidade das peças de Eucalyptus grandis

In 2010, the Brazilian forest sector is represented by about 30,000 companies producing US$ 21 billion annually and account for approximately 5% of the gross domestic product (GDP) in the country. The sanding process is highly demanded in various stages of industrialization of the wood, when there is a need for a better quality surface finishing. The objective of this work was to analyze the influence of cutting speed and sandpaper granulometry on both the surface finishing of pieces of Eucalyptus grandis processed through tubular sanding and on the sanding efforts (force and power of sanding). Four cutting speeds were used (19.5, 22.7, 26 and 28.1 m/s), one advance speed (16 m/min) and three sets of sandpaper (80-100, 80-120 and 100-120) being one for chipping and another for finishing, respectively. A central data acquisition system was set up to capture the variables (cutting power, acoustic emission and vibration) in real time. The cutting force was obtained indirectly, through a frequency inverter. The roughness of the parts was measured by a roughness meter before and after sanding. The highest cutting speed used (28.1 m/s) consumed more power and generated more acoustic emission among the four speeds tested. Regarding the vibration, the lower cutting speed (19.5 m/ s) generated the highest vibration in the sander machine. It is concluded that the range of 100-120 sandpapers resulted in values of average roughness (Ra) lower than the other sets of sandpaper used, as it resulted in better surface finishing.

Polinização controlada em eucaliptos nas empresas florestais brasileiras

Controlled pollination is an important tool in a forest genetic improvement program, which permits to choose parents and make specific crosses maximizing gains and providing superior genotypes in less time than conventional pollination. To verify the needs of the forest companies regarding the conduction of controlled pollination orchards in the breeding program, a specific questionnaire was sent in September 2011 to companies associated to IPEF. The objective of the questionnaire was to collect basic information about the current situation of controlled pollination orchards and check the main difficulties and demands related. It was found that use of the controlled pollination orchard has begun to be used by companies in the Brazilian forest sector just a few years ago and is considered to be very important in breeding programs in order to shorten the time to obtain new genotypes; but there is still need of crucial information regarding the management of these orchards. The main demands are: Basic concepts of flowering induction; homogeneity of flowering; hormonal induction and alternative techniques for flowering; relationship between management and genotypes used; variations in the flowering of different genotypes; management of the orchard in the different phenological phases; process of grafting typesand interaction between graft and rootstock, irrigation systems; species identification and flowering map.

Cultivo de Eucalyptus urograndis em atmosfera enriquecida com CO2: mudanças no proteoma cloroplastidial

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)