15 resultados para fire safety design

em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"


Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work deals with the stages of the process of renewal of a Notice of Inspection of Fire Department (AVCB) set of structural measures, technical and organizational integrated to ensure the building an optimum level of protection in the security segment fire and panic according to the laws of fire safety standards. The work presented all the literature about the process, their justifications to force deploy in a company to fire safety, the benefits that this standard offers, the facilities in a company that has a AVCB and the great importance in society, presents some examples where there contained the fire safety regulations and their unhappy outcomes, difficulties encountered, examples of how to proceed, step by step and the lesson that this process requires great care, dedication, professionals with the required knowledge and severity to completion

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work deals with the stages of the process of renewal of a Notice of Inspection of Fire Department (AVCB) set of structural measures, technical and organizational integrated to ensure the building an optimum level of protection in the security segment fire and panic according to the laws of fire safety standards. The work presented all the literature about the process, their justifications to force deploy in a company to fire safety, the benefits that this standard offers, the facilities in a company that has a AVCB and the great importance in society, presents some examples where there contained the fire safety regulations and their unhappy outcomes, difficulties encountered, examples of how to proceed, step by step and the lesson that this process requires great care, dedication, professionals with the required knowledge and severity to completion

Relevância:

30.00% 30.00%

Publicador:

Resumo:

CONTEXTO E OBJETIVO: Os tubos traqueais são dispositivos utilizados para manutenção da ventilação. A hiperinsuflação do balonete do tubo traqueal, causada pela difusão do óxido nitroso (N2O), pode determinar lesões traqueais, que se manifestam clinicamente como odinofagia, rouquidão e tosse. A lidocaína, quando injetada no balonete do tubo traqueal, difunde-se através de sua parede, determinando ação anestésica local na traquéia. O objetivo foi avaliar a efetividade e a segurança do balonete do tubo traqueal preenchido com ar comparado com o balonete preenchido com lidocaína, considerando os desfechos: sintomas cardiovasculatórios (HAS, taquicardia); odinofagia, tosse, rouquidão e tolerância ao tubo traqueal. TIPO DE ESTUDO E LOCAL: Estudo clínico prospectivo, realizado no Departamento de Anestesiologia da Faculdade de Medicina da Unesp, campus de Botucatu. MÉTODOS: A pressão do balonete do tubo traqueal foi medida, entre 50 pacientes, antes, 30, 60, 90 e 120 minutos após o início da inalação de N2O anestésico. As pacientes foram distribuídas aleatoriamente em dois grupos: Air, em que o balonete foi inflado com ar para obtenção de pressão de 20 cm H2O, e Lido, em que o balonete foi preenchido com lidocaína a 2% mais bicarbonato de sódio a 8,4% para obtenção da mesma pressão. O desconforto antes da extubação, e manifestações clínicas como dor de garganta, rouquidão e tosse foram registrados no momento da alta da unidade de cuidados pós-anestésicos, e dor de garganta e rouquidão foram avaliadas também 24 horas após a anestesia. RESULTADOS: Os valores da pressão no balonete em G2 foram significativamente menores do que os de Air em todos os tempos de estudo, a partir de 30 minutos (p < 0,001). A proporção de pacientes que reagiu ao tubo traqueal no momento da desintubação foi significantemente menor em Lido (p < 0,005). A incidência de odinofagia foi significantemente menor em Lido no primeiro dia de pós-operatório (p < 0,05). A incidência de tosse e rouquidão não diferiu entre os grupos. CONCLUSÕES: Durante ventilação artificial, empregando-se a mistura de oxigênio e N2O, a insuflação do balonete com lidocaína 2% alcalinizada impede que ocorra aumento significante da pressão no balonete e determina maior tolerância ao tubo traqueal e menor incidência de odinofagia no pós-operatório, podendo então ser considerada mais segura e com maior efetividade.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objective: To investigate the efficacy of soy isoflavone on climacteric symptoms in postmenopausal women.Design: In this double-blind, randomized, placebo-controlled study, a total of 80 women (mean age =55.1 years), who reported 5 or more hot flush episodes per day, were randomized to receive either 250 mg of standardized soy extract (Glycine max AT) a total of 100 mg/day of isoflavone (n=40) or placebo (n=40). Exclusion criteria included: contra-indication for hormone therapy (HT), chronic gastrointestinal diseases, and users of HT within the preceding 6-months. For 10-months, climacteric symptoms were evaluated using a score card and the menopausal Kupperman index. Compliance and safety were also assessed. At baseline and the end of the study, lipid and hormonal profiles, as well as vaginal, mammographic and ultrasonographic parameters were measured. The t-test, Wilcoxon test and ANOVA were used in the statistical analysis.Results: At baseline, the mean number of hot flushes was 9.6 +/- 3.9 per day in the isoflavone group and 10.1 +/- 4.9 in the placebo group (p>0.05). After 10 months, there was a significant reduction in frequency of hot flushes among isoflavone users when compared to those on placebo (3.1 +/- 2.3 and 5.9 +/- 4.3, respectively) (p<0.001). Kupperman index mean values showed a significant reduction in both groups. However, soy isoflavone was significantly superior to placebo, in reducing hot flush severity (69.9% and 33.7%, respectively) (p<0.001). Endometrial thickness, mammography, vaginal cytology, lipids and hormonal profile did not change in both groups. No serious adverse event related to isoflavone treatment was reported.Conclusions: the soy isoflavone extract exerted favorable effects on vasomotor symptoms and good compliance, providing a safe and effective alternative therapeutic for postmenopausal women. (C) 2007 Elsevier B.V.. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The objectives of the present study were to evaluate the safety of mixer/loaders and applicators of paraquat to maize crop by knapsack sprayers and to determine the efficacy of safety measures applied to the sprayers. Potential dermal exposure (PDE) was evaluated in 22 worker body parts. The Cu2+ cation of a copper-based fungicide was used as tracer in the spray solution. Sanitary pads and cotton gloves were used to collect the pesticide solution on the sampled body parts. It was observed that paraquat application in front of the applicator's body (0.5 and 1.0 m lance) is unsafe because PDE was 1,979.8 ml/day (for 0.5 m lance) and 1,290.4 ml/day (for 1.0 m lance) and needs 50-80% and 37-69% control of PDE respectively. Control can be achieved by the use of protective garment on the legs and feet only, which received 92-93% of the PDE. Switching the spray nozzle to the back of the operator reduced the PDE by 98% and was sufficient to make working conditions safe, while maintaining the efficiency of application and making the work lighter and more comfortable. Mixer/loaders received 86% of the PDE to the hands and the work condition was safe (MOS > 1), however impermeable gloves could be used as a further safety measure.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

New vaccine design techniques have allowed the development of effective vaccine strains against Salmonella infections in which the risks of reversion to the wild type and virulence is null. The mutant strain Salmonella Gallinarum ΔcobSΔcbiA was previously shown to be avirulent in chickens. In this study, this strain was tested as a vaccine against Salmonella Gallinarum (SG) and S. Enteritidis (SE) infections, and its protection levels, safety and possible risks of reversion to virulence after vaccination of layers were evaluated. Birds were vaccinated at five days of age or at five and 25 days of age. At 45 days of age, brown and white layers were challenged with SG and SE wild strains, respectively. Two assays to test the possibility of reversion to virulence were performed. Five successive bacterial passages in brown layers were carried out in the first assay. In the second assay, brown layers received a ten-fold concentrated inoculum of the SGΔcobSΔcbiA strain and were evaluated for clinical signs and mortality. In both experiments, no birds that received the inoculation of the attenuated strain died. Additionally, the use of the mutant strain as a vaccine provided good protection levels against both challenge strains.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This research aims to investigate a topic sometimes overlooked among the research of ergonomics. Particularly, we treat the garments as personal protective equipment. In this study we abode on clothing produced and used in Brazil, making notes about the management of occupational safety for the use of such equipment. In turn, identify Relevant requirements for the design of personal protective equipment used in Brazil, in line with what is being studied in global forums on the subject. © 2013 Taylor & Francis Group.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Design - FAAC

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The appropriate use of computer aided technologies, allied to the concepts and design guidelines, grounded in biology, stimulated the development of a solar toilet, able to convert human waste into compost, rich in nutrients for use in gardens, farms and small farms. This transdisciplinary approach is presented as a necessary tool to be used in academia, integrating and developing activities previously disconnected. The solar toilet also called green bathroom, combines the most modern concepts and technologies of computer-aided design, design, selection of materials and microbiological control, reaching biologically correct and safe composting of waste, ensuring the viability of the project terms of cost, deployment, use and environmental safety, such as supporting sustainable development. It is also planned to install a pilot project in a small community with the aim of assessing its implementation and use as a complementary activity and university extension.