Pharmacokinetic and pharmacodynamic modelling of intravenous, intramuscular and subcutaneous buprenorphine in conscious cats

Objective To describe simultaneous pharmacokinetics (PK) and thermal antinociception after intravenous (IV), intramuscular (IM) and subcutaneous (SC) buprenorphine in cats. Study design Randomized, prospective, blinded, three period crossover experiment. Animals Six healthy adult cats weighing 4.1±0.5kg. Methods Buprenorphine (0.02mgkg-1) was administered IV, IM or SC. Thermal threshold (TT) testing and blood collection were conducted simultaneously at baseline and at predetermined time points up to 24hours after administration. Buprenorphine plasma concentrations were determined by liquid chromatography tandem mass spectrometry. TT was analyzed using anova (p<0.05). A pharmacokinetic-pharmacodynamic (PK-PD) model of the IV data was described using a model combining biophase equilibration and receptor association-dissociation kinetics. Results TT increased above baseline from 15 to 480minutes and at 30 and 60minutes after IV and IM administration, respectively (p<0.05). Maximum increase in TT (mean±SD) was 9.3±4.9°C at 60minutes (IV), 4.6±2.8°C at 45minutes (IM) and 1.9±1.9°C at 60minutes (SC). TT was significantly higher at 15, 60, 120 and 180minutes, and at 15, 30, 45, 60 and 120minutes after IV administration compared to IM and SC, respectively. IV and IM buprenorphine concentration-time data decreased curvilinearly. SC PK could not be modeled due to erratic absorption and disposition. IV buprenorphine disposition was similar to published data. The PK-PD model showed an onset delay mainly attributable to slow biophase equilibration (t1/2ke0=47.4minutes) and receptor binding (kon=0.011mL ng-1minute-1). Persistence of thermal antinociception was due to slow receptor dissociation (t1/2koff=18.2minutes). Conclusions and clinical relevance IV and IM data followed classical disposition and elimination in most cats. Plasma concentrations after IV administration were associated with antinociceptive effect in a PK-PD model including negative hysteresis. At the doses administered, the IV route should be preferred over the IM and SC routes when buprenorphine is administered to cats. © 2012 Association of Veterinary Anaesthetists and the American College of Veterinary Anesthesiologists.

Parasitology of juvenile mullet (Mugil liza) and effect of formaldehyde on parasites and host

Few studies have been performed with parasites of marine and estuarine fish in southern Brazil. In the present study, unpublished results show the ways of parasitism of juvenile mullet by parasites. The toxicity of formaldehyde and the effectiveness of this chemotherapy in controlling parasites in reared juvenile mullet Mugil liza were also studied. Juvenile mullets (1 +/- 0.26 g; 4.1 +/- 0.4 cm) were exposed to different concentrations of 37% formaldehyde: control group and five formaldehyde concentrations which were tested: T1 (13.5), T2 (21.6), T3 (40.5), T4 (81) and T5 (135) mg L-1 with 8 fish per repetition in triplicate. To verify the drug effectiveness in parasitic control, juvenile mullets were exposed to 1 h prophylactic bath of 37% formaldehyde with a control group and five formaldehyde concentrations: T1 (67.5), T2 (135), T3 (270), T4 (405) and T5 (540) mg L-1, 8 fish per repetition in triplicate. Ligophorus cf. uruguayensis (Monogenoidea: Ancyrocephalidae) and Solostamenides cf. platyorchis (Monogenoidea: Microcotylidae) were identified in the gills. Digenea and Nematoda were observed in the intestines. This is the first occurrence of S. cf. platyorchis in Brazil. During the toxicity test, the LC50-96 h was estimated at 20.77 mg L-1 of formaldehyde. During the 1 h formaldehyde prophylactic bath, all parasites were eliminated in formaldehyde concentrations between 135 and 540 mg L-1. High survival rate was observed in all treatments. Values of prevalence and intensity of infestation observed in this study showed the potential damage caused by Monogenoidea to mullet. Formaldehyde baths with 135 mg L-1 are recommended to control Monogenoidea in mullet and the safe limits for formaldehyde use were presented. Besides, the endoparasites were tolerant to formaldehyde exposure. (C) 2012 Elsevier B.V. All rights reserved.

Effects of plant densities and management of purple nutsedge on sugarcane yield and effect of growth stages and main way of herbicides contact and absorption on the control of tubers

Field experiments carried out with Cyperus rotundus L. at low (58-246), medium (318773), and high (675-1198 shoots/m(2)) densities showed sugarcane yield reductions of 13.5, 29.3, and 45.2%, respectively in relation to the control. In the second field experiment, the integration of a mechanic method with two sequences of plowing and disking operations in the dry season, and complementary applications of trifloxysulfuron-sodium + ametrine and sulfentrazone (rainy season) was studied. Average of the chain connected to original shoot showed 92, 95, and 65% of reduction with trifloxysulfuron-sodium + ametrine and surfactant, at the application stages early, preflowering, and full flowering, respectively.

Susceptibility of winter crops to Pratylenchus brachyurus and effect on the nematode population in the maize crop

The aim of this study was to evaluate the susceptibility of winter crops to Pratylenchus brachyurus and their effect on the population of phytonematodes in the maize. To study the effect of the plants on nematodes, an experiment was set up in sandy, naturally-infested soil. The area was divided into strips, consisting of six blocks of 16 treatments, with eight winter treatments, subdivided on the basis of the fertilizer used (organic: bird litter, and synthetic: NPK). The initial nematode population was determined by sampling the soil (100 cm(3)) and weeds (10 g of root). The winter treatments put in place (bristle oats, chickpea, vetch bean, common bean, oilseed radish, wheat, intercropped bristle oats + oilseed radish and fallow), and the nematode population determined 100 days after sowing. Subsequently, two maize crops (summer and short season) were planted, and the nematode population in the soil and roots determined during crop full bloom. To evaluate the susceptibility of winter crops to nematodes, an experiment was conducted under controlled conditions, determining the nematode reproduction factor (RF) in the treatments described above. Both in the field and under controlled conditions, it was observed that the bristle oats, oilseed radish and intercropped oats + oilseed radish exhibited lower reproduction rates for P. brachyurus. In the field, lower population of nematodes was observed with the application of bird litter. Under controlled conditions, the highest RF were observed in the fallow plot and under common bean and chickpea, in that order.

Ligninolytic activity from newly isolated basidiomycete strains and effect of these enzymes on the azo dye orange II decolourisation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Conversion Degree of Indirect Resin Composites and Effect of Thermocycling on Their Physical Properties

Purpose: This study evaluated the degree of conversion (DC) of four indirect resin composites (IRCs) with various compositions processed in different polymerization units and investigated the effect of thermal aging on the flexural strength and Vicker's microhardness.Materials and Methods: Specimens were prepared from four IRC materials, namely Gr 1: Resilab (Wilcos); Gr2: Sinfony (3M ESPE); Gr3: VITA VMLC (VITA Zahnfabrik); Gr4: VITA Zeta (VITA Zahnfabrik) using special molds for flexural strength test (N = 80, n = 10 per group) (25 x 2 x 2 mm(3), ISO 4049), for Vicker's microhardness test (N = 80, n = 10 per group) (5 x 4 mm(2)) and for DC (N = 10) using FT-Raman Spectroscopy. For both flexural strength and microhardness tests, half of the specimens were randomly stored in distilled water at 37 degrees C for 24 hours (Groups 1 to 4), and the other half (Groups 5 to 8) were subjected to thermocycling (5000 cycles, 5 to 55 +/- 1 degrees C, dwell time: 30 seconds). Flexural strength was measured in a universal testing machine (crosshead speed: 0.8 mm/min). Microhardness test was performed at 50 g. The data were analyzed using one-way and two-way ANOVA and Tukey's test (alpha = 0.05). The correlation between flexural strength and microhardness was evaluated with Pearson's correlation test (alpha = 0.05).Results: A significant effect for the type of IRC and thermocycling was found (p = 0.001, p = 0.001) on the flexural strength results, but thermocycling did not significantly affect the microhardness results (p = 0.078). The interaction factors were significant for both flexural strength and microhardness parameters (p = 0.001 and 0.002, respectively). Thermocycling decreased the flexural strength of the three IRCs tested significantly (p < 0.05), except for VITA Zeta (106.3 +/- 9.1 to 97.2 +/- 14 MPa) (p > 0.05) when compared with nonthermocycled groups. Microhardness results of only Sinfony were significantly affected by thermocycling (25.1 +/- 2.1 to 31 +/- 3.3 Kg/mm(2)). DC values ranged between 63% and 81%, and were not significantly different between the IRCs (p > 0.05). While a positive correlation was found between flexural strength and microhardness without (r = 0.309) and with thermocycling (r = 0.100) for VITA VMLC, negative correlations were found for Resilab under the same conditions (r = -0.190 and -0.305, respectively) (Pearson's correlation coefficient).Conclusion: Although all four IRCs presented nonsignificant DC values, flexural strength and microhardness values varied between materials with and without thermocycling.

Photo-electrochemical investigation of anodic oxide films on cast Ti-Mo alloys I. Anodic behaviour and effect of alloy composition

The anodic behaviour of cast Ti-Mo alloys, having different Mo contents (6-20 wt.%), was investigated in acidic and neutral aerated aqueous solutions. All sample showed a valve-metal behaviour, owing to formation and thickening of barrier-type anodic oxides displaying interference colours Growth kinetics. of passive films is influenced by both anodizing electrolyte and composition of the starting alloy. This last parameter was found to change also the solid-state properties of the films, explored by photoelectrochemical and impedance spectroscopy experiments. Thicker films (U(f) = 8 V/MSE) grown on alloys richer in Mo showed more resistive character and a photocurrent sign inversion under negative bias, that revealed an insulating character, whereas corresponding films grown on alloys with lower Mo content, as well as thinner films, behaved as n-type semiconductors. Results are discussed in terms of formation of a mixed Ti-Mo oxide phase. (C) 2008 Elsevier Ltd. All rights reserved

Seed maturation and effect of temperature regime on Trema micrantha (L.) Blume seed germination

T. micrantha (L.) Blume (Ulmaceae), a common pioneer tree species in Brazil, is used in the restoration of degraded areas. The fruits are fleshy and indehiscent, with only one water impermeable seed. During the fruiting period, fruits of different colours are found at the same time on the same branch. This research aimed to correlate fruit colour with other physical indicators of seed maturity and to Verify the effect of temperature regime on seed germination. Collected fruits were separated in to green, green-red and red colour and for each of these maturation stages, size, moisture content and dry matter of both fruits and seeds were determined. Seeds were scarified with sulphuric acid and submitted to a germination test conducted at constant (20 degreesC, 30 degreesC and 40 degreesC) and alternating (20-30 degreesC, 30-40 degreesC and 20-40 degreesC) temperatures for 15 weeks. Seed germination percentage and speed were analysed after five weeks and the fmal percentage of germinated and Viable seeds after 15 weeks. Seed maturity is attained when the fruits are green-red. At this stage, moisture content was about 64% for fruits and 10% for seeds. Alternating temperature was required for seed germination and 20-30 degreesC was the best option. Most seeds had germinated after five weeks, providing mature seeds, acid scarification and alternating temperature were used.

Carrying and Effect of Granulated Baits Formulated with Entomopathogenic Fungi among Atta sexdens rubropilosa Colonies (Hymenoptera: Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of storage period and effect of different brands of acrylic resin on the dimensional accuracy of the maxillary denture base

The aim of this study was to evaluate the dimensional changes of denture bases made from different resins after different storage periods. For this purpose, 25 sets of plaster models/resin bases were prepared using 4 acrylic resins submitted to two types of polymerization: 1- QC-20 submitted to polymerization by microwave energy; 2- QC-20 submitted to polymerization by water hot bath; 3- Vipi Cril submitted to polymerization by water hot bath; 4- Vipi Wave submitted to polymerization by microwave energy; and 5- Onda Cryl submitted to polymerization by microwave energy. After polymerization, the specimens were sectioned for accuracy readings using a comparison microscope. Readings were taken at 3 points: the crests of the right (A) and left (B) ridges, and the median region of the palate, in 4 different periods. The data obtained were submitted to two-way ANOVA and Tukey's test at 5% significance level. The greatest distortions were found in the posterior palatal region of the base (M), with statistically significant difference (p<0.05) for the studied resins. All acrylic resins presented dimensional changes and the storage period influenced these alterations.

Mechanism and effect of esculetin in an experimental animal model of inflammatory bowel disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In vitro evaluation of permeation, toxicity and effect of praziquantel-loaded solid lipid nanoparticles against Schistosoma mansoni as a strategy to improve efficacy of the schistosomiasis treatment

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of cellulose nanofibrils on soft and hard segments of polyurethane/cellulose nanocomposites and effect of humidity on their mechanical properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PWA-diureasils organic-inorganic hybrids: photochromism and effect of the organic chain length

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)