Does ISO 14001 work in Brazil?

As a result of increasing global awareness about the importance of the environment, depletion of natural resources and legal pressures for companies to manage their processes in a sustainable manner, ISO 14001 systems have been gaining increasingly more importance in the organizational scenario. These elements are even more critical in emerging nations due to less awareness and fewer demands by governments and the population in relation to environmental issues. Therefore, the main objective of this study is to verify the benefits and difficulties of Environmental Management Systems based on ISO 14001 at industries in the state of São Paulo - Brazil (an emerging country) by conducting a survey to subsidize the proposal for actions in the public, academic and private sectors to promote the use of this standard of reference and strengthen its results in Brazil. A questionnaire was sent to 194 companies from the National Institute of Metrology, Standardization and Industrial Quality database. 69 answered, representing a return rate of 35.36%. The main benefits identified are related to the development of preventive environmental actions, reduction in the consumption of power, water, gas and fuel oil, and a positive influence on other internal management processes. The main difficulties are related to cost increases from ISO 14001 management systems and the constant changes in environmental legislation in Brazil. Some actions are proposed at the end of the analyses to intensify the use and improve the results of this standard, such as changes in government legislation and its collective development and implementation in industries. (C) 2010 Elsevier Ltd. All rights reserved.

Orientation dependence of stored energy of cold work in semi-processed electrical steels after temper rolling

Microhardness measurements were carried out in a low carbon lamination steel after 6% of temper rolling, in order to evaluate local variations of work hardening as a function of crystallographic orientation. EBSD (electron back scattered diffraction) was used to determine grain orientations with respect to individual rolling planes and rolling directions. Hardness was shown to increase with the local Taylor factor. TEM observations and a well-known dislocation hardening model were used to confirm the equivalence between hardness values and the stored energy of cold work. A definite correlation between stored energy and Taylor factors could therefore be established, being more consistent than previous data reported in the literature. The improvement was thought to be related to the rather small plastic deformation, during which Taylor factors could be considered to remain constant. (c) 2006 Elsevier B.V. All rights reserved.

DIFFERENT MEDIA, DIFFERENT TYPES OF COLLECTIVE WORK IN ONLINE CONTINUING TEACHER EDUCATION: WOULD YOU PASS THE PEN, PLEASE?

This paper presents some findings regarding the interaction between different computer interfaces and different types of collective work. We want to claim that design in online learning environments has a paramount role in the type of collaboration that happens among participants. In this paper, we report on data that illustrate how teachers can collaborate online in order to learn how to use geometry software in teaching activities. A virtual environment which allows that construction to be carried out collectively, even if the participants are not sharing a classroom, is the setting for the research presented in this paper.

Building sustainable values in organizations with the support of human resource management: Evidence from one firm considered as the 'best place to work' in Brazil

Researchers and other professionals unanimously agree that companies should become more sustainable, but this will not happen without the support of human resource management. Paradoxically, there is a lack of information on the support human resource management offers to organizational sustainability applied to real cases. Therefore, this research presents a case study on this topic that was carried out in a leading Brazilian company, which is considered as a model and has been selected as 'the best place to work in the country'. The results provide practical examples of how this family company has been working to guarantee an increasingly sustainable performance with the support of human resources, highlighting the achievements and challenges the company has faced. One of the main results indicates that companies seeking to achieve sustainability need the assistance of the human resource field in order to design a communication system which bridges the gap between practices and sustainable values. © 2012 Management Centre for Human Values.

Dissertação readymadenemtanto da aluna de poesia Rrosé Selavy Duchampignon (work in progress) -: ideograma mental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Challenges of Psychology at Work in Mental Health: the drugs issue.

This article aims to show that the challenges of psychology in working with mental health in the field of drugs is traversed by both the conceptions molded by biopolitical forces (FOUCAULT) as the decadence of modern democracy (AGAMBEN), and visible features in the current treatment given in Brazil to issue of smoking (SILVA), as well as urbanistic projects such as the case of Luz district in São Paulo (LEITE & CASTRO). In this sense, it leads us to question about what is prohibited, about who actually suffers the punishment, in short, about what do we really take care when we take into account the Unheimlich (FREUD) and other social interdicts (BATAILLE).

LUDIBUS, o ônibus da alegria: possibilidades de estágio extracurricular aliando ensino, pesquisa e extensão

This paper aims to present the Ludibus project, by Faculty of Philosophy and Science of Unesp, Marilia Campus, and placement possibilities offered by extracurricular work of teaching, research and extension education developed by his team. The Project is characterized by the existence of a playful bus, adapted to the development of artistic, recreational and literary schools in Basic Education (Early Childhood Education and Elementary Education, cycle I). It aims to contribute to the process of initial and continuing training of man and women teachers who will serve and act in Basic Education and to offer proposals for artistic and recreational activities for children of kindergarten and the early grades of elementary school, with a view to the creation, appreciation and reflection related to artistic languages and playful. We make use of action research and varied procedures in order to organize and provide activities related to the themes of the project the teachers and children. The results point to good learning opportunities and enriching experiences for the teacher training process, setting up the project in a privileged place for the occurrence of extracurricular period.

Informatics competencies in nursing management

This study aimed to identify in scientific literature the informatics competencies required from the nurses to make decision in management process. Through a scoping review, literature databases were searched to find articles published in Portuguese, English, or Spanish, until July 2013. 188 articles were found, and seven were included in this study, published between 1994 and 2011. The studies were written in English (5; 71%), in USA (5; 71%), using experience reports or literature review designs (5; 71%). The informatics competences were categorized according the Technology Informatics Guiding Education Reform (TIGER). The findings highlight gaps in informatics competence to make decisions in the management process--essentially in information management competence.

Calculable lepton masses, seesaw relations, and four neutrino mixings in a 3-3-1 model with an extra U(1) symmetry

We propose a scheme in which the masses of the heavier leptons obey seesaw type relations. The light lepton masses, except the electron and the electron neutrino ones, are generated by one loop level radiative corrections. We work in a version of the 3-3-1 electroweak model that predicts singlets (charged and neutral) of heavy leptons beyond the known ones. An extra U(1)(Omega) symmetry is introduced in order to avoid the light leptons getting masses at the tree level. The electron mass induces an explicit symmetry breaking at U(1)(Omega). We discuss also the mixing matrix among four neutrinos. The new energy scale required is not higher than a few TeV.

Study of postures in sugarcane cutters in the Pontal of Paranapanema-SP, Brazil

The expansion of sugarcane monoculture in Brazil in the last decades has pointed out to the necessity of considering the question of sugarcane cutters occupational health. In this work we present a cross-sectional study aiming to examine the occupational posture of a group of sugarcane cutters, which work in a cane field located in the region of Pontal do Paranapanema-SP, Brazil. The study was made using the Ergonomic Analysis of Work - EAW methodology and the postural analysis method by Win-OWAS. Through the obtained records of postures, it was observed that during a workday the sugarcane cutters remain standing erect on two legs or in one leg 66% of the time and that their trunk remain tilted and in rotation, according to 63% of the positions categorized. It was also observed that the sugarcane cutter trunk performs repetitive and boundless movements during his routine of work, which can expose this individual to additional wear of their musculoskeletal functions. The activities in which the individual engages have favorable or adverse influence on his posture. The repetitive movements involved in specialized occupations are equivalent to repeated exercises, thus may be responsible for the excessive development of certain muscle groups. The study suggests that the postures adopted by sugarcane cutters can overload their musculoskeletal system and predispose the cutters to work-related musculoskeletal diseases.

Urinary Mutagenicity in Chemical Laboratory Workers Exposed to Solvents

Solvents represent an important group of environmental pollutants to which people are exposed daily in the workplace. The physico chemical properties of solvents may result in disturbances to cellular structures, including damage to DNA. However, the effects of mixtures of solvents are not well known. Mutations caused by environmental agents are related to cancer development and other degenerative diseases. The work in a research laboratory that uses several types of solvents is equally predisposed to these hazards. In this study, we evaluated the mutagenicity of urine from 29 subjects exposed occupationally to solvents in a chemistry research laboratory and 29 subjects without occupational exposure (controls). Urine samples were collected in polyethylene containers at the end of the work shift. For the concentration and extraction of urine samples the XAD-2 resin was used with acetone as an eluting agent. Several strains of Salmonella typhimurium (TA100, TA98, TA97a, TA1535, YG1024) should be used to assess mutagenic susceptibilities among workers exposed to organic solvents. Different doses of extract (1.5; 3.0; 6.0 and 12.0 m/ equivalents of urine per plate) were tested on S. typhimurium strains TA100 and YG 1024, with and without metabolic activation. The mutagenic activity, measured in Salmonella typhimurium YGI1024 with S9 mix, was significantly greater in urine from workers than from controls (p <= 0.05). These results indicate the relevance of using biomarkers to assess the risk of occupational exposure to organic solvents.

Efficient heuristic algorithm used for optimal capacitor placement in distribution systems

An efficient heuristic algorithm is presented in this work in order to solve the optimal capacitor placement problem in radial distribution systems. The proposal uses the solution from the mathematical model after relaxing the integrality of the discrete variables as a strategy to identify the most attractive bus to add capacitors to each step of the heuristic algorithm. The relaxed mathematical model is a nonlinear programming problem and is solved using a specialized interior point method, The algorithm still incorporates an additional strategy of local search that enables the finding of a group of quality solutions after small alterations in the optimization strategy. Proposed solution methodology has been implemented and tested in known electric systems getting a satisfactory outcome compared with metaheuristic methods.The tests carried out in electric systems known in specialized literature reveal the satisfactory outcome of the proposed algorithm compared with metaheuristic methods. (C) 2009 Elsevier Ltd. All rights reserved.

EVALUATION OF THE PERCEPTION TOWARDS RESEARCH INVOLVING HUMAN BEINGS IN BRASILEAN POST DEGREE STUDENTS

In Brazil, research involving human beings must obey to ethical norms foresaw by the 196/96 National Health Council Resolution of the Ministry of Health. This paper gives account of a knowledge evaluation about some concepts and rules established by the resolution by Dental post degree students. It is concluded that in spite of the spreading and importance of the resolution most students do not know about it. In the same situation are those who work in research.

Influence of examiner's clinical experience on the reproducibility and accuracy of radiographic examination in detecting occlusal caries

The aim of this in vitro study was to assess the influence of varying examiner's clinical experience on the reproducibility and accuracy of radiographic examination for occlusal caries detection. Standardized bitewing radiographs were obtained from 166 permanent molars. Radiographic examination was performed by final-year dental students from two universities (A, n=5; B, n=5) and by dentists with 5 to 7 years of experience who work in two different countries (C, n=5; D, n=5). All examinations were repeated after 1-week interval. The teeth were histologically prepared and assessed for caries extension. For intraexaminer reproducibility, the unweighted kappa values were: A (0.11-0.40), B (0.12-0.33), C (0.47-0.58), and D (0.42-0.71). Interexaminer reproducibility statistics were computed based on means +/- SD of unweighted kappa values: A (0.07 +/- 0.05), B (0.12 +/- 0.09), C (0.24 +/- 0.08), and D (0.33 +/- 0.10). Sensitivity, specificity, and accuracy were calculated at D(1) and D(3) thresholds and compared by performing McNemar test (p=0.05). D(1) sensitivity ranged between 0.29 and 0.75 and specificity between 0.24 and 0.85. D(3) specificity was moderate to high (between 0.62 and 0.95) for all groups, with statistically significant difference between the dentists groups (C and D). Sensitivity was low to moderate (between 0.21 and 0.57) with statistically significant difference for groups B and D. Accuracy was similar for all groups (0.55). Spearman's correlations were: A (0.12), B (0.24), C (0.30), and D (0.38). In conclusion, the reproducibility of radiographic examination was influenced by the examiner's clinical experience, training, and dental education as well as the accuracy in detecting occlusal caries.