Fishery of the Uçá Crab Ucides Cordatus (Linnaeus, 1763) in a Mangrove Area in Cananéia, State of São Paulo, Brazil: Fishery Performance, Exploitation Patterns and Factors Affecting the Catches

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tunnelling behaviour of the Asian subterranean termite in heterogeneous soils: presence of cues in the foraging area

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evolution of the mechanical properties of a tropical soil stabilized with lime and ash of rice rind

The ash of rice rind is a pozzolanic material that reacts with the calcium hydroxide (Ca (OH)2) forming bonding composites, when finely worn out and in water presence. Considering this behavior, the objective of the present work was to evaluate the potential use of this residue in the enrichment of the content of pozzolanic materials of a tropical soil stabilized with a commercial hydrated lime. The laboratory testing program incorporated unconfined compression strength tests performed on the soil and on its mixtures with contents of 8% of lime enriched with 5 and 10% of ash of rice rind in relation to the soil dry mass. The results of the testing program supported that the use of the residue was effective in increasing the degree of reactivity of the soil that was also directly related with the increase in the ash content and the period of cure of the mixtures.

Testing the ecomorphological hypothesis in a headwater riffles fish assemblage of the rio São Francisco, southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular analysis of the Von Hippel-Lindau (VHL) gene in a family with non-syndromic pheochromocytoma: the importance of genetic testing

Dois pacientes índices da família analisada neste estudo foram submetidos a adrenalectomia bilateral devido a feocromocitoma. Foi, então, realizado o estudo genético dos pacientes e de sete parentes de primeiro grau. Os dois pacientes com feocromocitoma e dois outros membros assintomáticos da família apresentaram a mutação c496G>T no exon 3 do gene VHL. A família perdeu seguimento médico. Três anos após a realização da avaliação genética, a irmã dos pacientes, portadora da mutação, foi encaminhada para o nosso serviço após uma gestação complicada por pré-eclampsia. Ela referia paroxismos sugestivos de feocromocitoma, mas as metanefrinas urinárias eram negativas. Entretanto, a tomografia computadorizada de abdômen evidenciou uma massa adrenal que também se contrastou na cintilografia com metaiodobenzilguanidina (MIBG). Esse estudo mostra que a análise molecular do paciente índice pode levar à identificação de parentes assintomáticos portadores da mutação. Além disso, mesmo com as metanefrinas urinárias negativas, a identificação de uma mutação específica levou a um aumento da suspeita e detecção de feocromocitoma na irmã dos afetados pela doença.

Exploitation of floral resources on Sparattosperma leucanthum (Bignoniaceae): foraging activity of the pollinators and the nectar and pollen thieves

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fruit and seed exploitation by small rodents of the Brazilian Atlantic forest

In the Brazilian Atlantic forest (BAF) there are at least 57 rodent species and most of them are considered omnivorous. These species feed, more or less frequently, on fruits and seeds. Nevertheless the potential role of each species as frugivorous, seed predator or seed disperser is still unclear. In the present study we analyzed patterns of fruit and seed exploitation by eight small rodent species from an Atlantic Forest site. We offered to captive animals fruits of 30 plant species (23 genera, 15 families). After 48 h we recorded consumption patterns of pulp/aril and seed. Rodent species differed in their patterns of fruit and seed exploitation. The smallest species, Akodon serrensis, Oligoryzomys nigripes, and Wilfredomys pictipes (body size range : 26-45 g), and also the medium-sized Oecomys aff. concolor (84 g) fed mainly on pulp and also on small to medium-sized seeds (< 10 mm diameter). The medium-sized rodent, Oryzomys russatus (91 g) fed on pulp and also on seeds with diameter ≤ 15 mm. Thus larger seeds remain intact after being manipulated by such species. The medium-sized Delomys dorsalis (72 g) and the larger Trinomys iheringi (274 g) and Nectomys squamipes (253 g) form a third group, which consumed both fruit and seed of most species independent of their size. These later two species and also O. russatus are probably the main seed predators in the rodent community of the BAF.

Reproduction and recruitment of the seabob shrimp: a threatened exploitation species in southeastern of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evolutionary Changes in the Complexity of the Tectum of Nontetrapods: A Cladistic Approach

Background: The tectum is a structure localized in the roof of the midbrain in vertebrates, and is taken to be highly conserved in evolution. The present article assessed three hypotheses concerning the evolution of lamination and citoarchitecture of the tectum of nontetrapod animals: 1) There is a significant degree of phylogenetic inertia in both traits studied (number of cellular layers and number of cell classes in tectum); 2) Both traits are positively correlated accross evolution after correction for phylogeny; and 3) Different developmental pathways should generate different patterns of lamination and cytoarchitecture.Methodology/Principal Findings: The hypotheses were tested using analytical-computational tools for phylogenetic hypothesis testing. Both traits presented a considerably large phylogenetic signal and were positively associated. However, no difference was found between two clades classified as per the general developmental pathways of their brains.Conclusions/Significance: The evidence amassed points to more variation in the tectum than would be expected by phylogeny in three species from the taxa analysed; this variation is not better explained by differences in the main course of development, as would be predicted by the developmental clade hypothesis. Those findings shed new light on the evolution of an functionally important structure in nontetrapods, the most basal radiations of vertebrates.

Effects of the high temperature plasma immersion ion implantation (PIII) of nitrogen in AISI H13 steel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of voids on the flexural resistance of the NCF/RTM6 composites

A major difficulty to achieve maximum weight savings in the manufacture of composite structural components, is the tendency of these materials have the formation of voids and cracks in the interior and surface components. In aeronautical applications, controlling the volume fraction of fibers, resins and empty the components of composite is very hard. In this work, composites of epoxy matrix RTM6 reinforced with NCF (non crimp fabric carbon) processed by resin transfer molding (RTM) were characterized for porosity (P-ap) and density (rho(ad)). We used a method based on Archimedes' principle (ASTM C830) and the technique of helium pycnometer. The porosity values were compared with those determined by acid digestion (ASTM D3171). The mechanical properties of processed composites was evaluated by testing on the performing flexural and the results were correlated with the porosity value. All techniques tested to determine void content are satisfactory. The differents results can be justified for heterogeneous void distribution on laminate and differences among techniques characteristics. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

Evaluation of the fretting fatigue behaviour of commercially pure titanium

Fretting fatigue occurs when the contact surfaces of two components undergo small oscillatory movement while they are subjected to a clamping force. A cyclic external load gives rise to the early initiation of fatigue cracks, thus reducing their service life. In this paper, the fretting fatigue behaviour of commercially pure titanium flat samples (1.5 mm thick) is evaluated. A fretting device composed of a frame, load cell, and two screw-mounted cylindrical fretting pads with convex extremities was built and set to a servo-hydraulic testing machine. The fatigue tests were conducted under load control at a frequency of 10 Hz and stress ratio R = 0.1, with various contact load values applied to the fretting pads. Additional tests under inert environment allowed assessing the role of oxidation on the wear debris formation. The fracture surfaces and fretting scars were analysed via scanning electron microscopy in order to evaluate the surface damage evolution and its effect on the fatigue crack features. The effect of the fretting condition on the S-N curve of the material in the range of 10(4)-10(6) cycles is described. Fatigue crack growth calculations allowed estimating the crack initiation and propagation lives under fretting conditions. The effect of the fretting condition in fatigue life is stronger for the lower values of cyclic stress and does not seem to depend on the contact loading value.

Structural characterization of wild rubbers, microstructure of the rubber extracted from ficus elastica by C-13-NMR

Low molecular weight fractions of polyisoprene extracted from Ficus elastica Herb. ex Hornem. were studied by C-13-NMR. The identification of 2-3 trans terminal units at the end of the polymer chain needed the acquisition of more than 17 000 transients. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Photoelastic Analysis of the Influence of Platform Switching on Stress Distribution in Implants

The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45 degrees) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.