Ambrosia and bark beetles (Scolytidae : Coleoptera) in pine and eucalypt stands in southern Brazil

More than 95% of the reforested area in Brazil is covered by exotic Eucalyptus and Pinus plantations. Native Scolytidae, mostly ambrosia beetles, appear to be rapidly adapting to these exotic trees, and reports of economic damage are becoming frequent. The objectives of our research were to survey, characterize and compare the Scolytidae fauna present in a P. taeda and an E. grandis stand in Telemaco Borba, Parana state, Brazil. Beetles were caught in ethanol baited ESALQ-84 vane traps in weekly collections from July 1995 until July 1997. In all, 87 species were trapped, 62 in the pine and 75 in the eucalypt stand. The most abundant beetle species in the pines were Hypothenemus eruditus, Xyleborinus gracilis, Cryptocarenus sp. and Xylosandrus retusus, while the most frequent were H. eruditus, Cryptocarenus sp., H. obscurus, Ambrosiodmus obliquus, and X. gracilis. In the eucalypt stand, H. eruditus, X. retusus, H. obscurus, X. ferrugineus and Microcorthylus minimus were the most abundant species, and H. eruditus, H. obscurus and M. minimus were the most frequently trapped. The majority of the species, regardless of the forest community, were most active between August (end of winter) and October (mid-spring). Significantly more H. eruditus, X. gracilis, Cryptocarenus sp., Corthylus obliquus, Hypothenemus bolivianus, A. obliquus, Sampsonius dampfi and Xyleborus affinis were trapped in the pine stand, while X. retusus, H. obscurus, X. ferrugineus, Xyleborinus linearicollis, Corthylus sp, and Corthylus convexicauda were caught in higher numbers in the eucalypt stand. Approximately 50% of the species trapped were found in both communities. Morisita's similarity index indicates the composition of the two communities is very similar, suggesting that most of the beetles are polyphagous. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Seed germination and removal of Michelia champaca L. (Magnoliaceae) in eucalypt stands: the influence of the aril

Testou-se o efeito do arilo na germinação de M. champaca em condições controladas, bem como na sua remoção, em ambiente natural. Os ensaios de germinação foram mantidos a 25 ± 2 °C, sob luz branca constante. Os experimentos de remoção foram levados a cabo em três talhões velhos (idades de 39 a 62 anos) e três novos (15 anos de idade) de eucalipto mantidos no Horto Florestal Navarro de Andrade, em Rio Claro, SP. Os resultados indicaram que o arilo inibe a germinação, sendo as sementes fotoblásticas positivas. Observou-se que a remoção de sementes foi maior em talhões velhos do que em novos, provavelmente devido à maior densidade de roedores nos talhões velhos. Nos talhões novos, verificou-se que formigas removiam mais sementes ariladas. Esses insetos são importantes agentes na remoção do arilo de sementes derrubadas por pássaros, promovendo, assim, aumento na germinação e evitando a possível predação das sementes por roedores.

Partitioning of net primary production in Eucalyptus and Acacia stands and in mixed-species plantations: Two case-studies in contrasting tropical environments

The introduction of nitrogen fixing species (NFS) in fast-growing tree plantations is an alternative option to reduce fertilizer inputs. However, the success of mixed-species plantations depends on the balance between positive interactions among species (resulting from facilitation and/or complementarity) and the negative effects of interspecific competition.Using a carbon budget approach and coupling measurements of standing biomass, aboveground litterfall and soil CO2 efflux, we assessed the influence of replacing half of eucalypt trees by Acacia mangium on total belowground carbon flux (TBCF), net primary production (NPP) and its partitioning between above- and belowground growth at two tropical sites in Brazil (Itatinga) and in Congo (Kissoko) exhibiting contrasting climates, edaphic conditions and wood productions.Annual soil CO2 efflux (FS) was significantly lower in the acacia monocultures than in eucalypt monocultures and mixed-species stands at both sites. Annual FS was significantly lower at Itatinga compared to Kissoko for all stands while TBCF was significantly lower in the eucalypt stands only. In the eucalypt monocultures we found a significantly lower aboveground NPP (ANPP) and wood production (wood NPP) at Kissoko compared to Itatinga that was almost fully balanced by a significantly higher belowground NPP (BNPP), leading to similar NPP. Similarly, acacia monocultures exhibited significantly higher ANPP and wood NPP at Itatinga than at Kissoko. The mixed-species stands exhibited a significantly lower wood NPP and ANPP than the eucalypt monocultures at the Brazilian site while NPP of the mixture was not significantly different than the average NPP of the two monocultures. At the Congolese site, NPP of the mixture was significantly higher than the average NPP of the two monocultures. NPP was similar in the mixed-species stand and the eucalypt monoculture with a significantly lower partitioning of NPP to belowground production, leading to a one third higher wood biomass at harvest in the mixed-species stand.A positive effect of growing eucalypts with the nitrogen fixing acacia trees on stand wood production occurred at Kissoko but not at Itatinga. Mixed-species plantations with NFS can be advocated at sites where the productive gains resulting from nitrogen fixation are not compromised by other resource limitations. © 2012 Elsevier B.V.

Otimização da distância de extração de madeira com forwarder

The activities and management operations of wood harvesting do not have good computational tools available to help the forest technicians with the task of cost reduction. In many cases, machines of high investment are used in wood harvesting without adequate operation planning; consequently, the cost per hour of these machines, which is high, could be reduced. Using technological resources such as the Geographic Information Systems (GIS) integrated with the Global Positioning System (GPS), which are the basis of precision harvesting. In this research, a technological tool capable of calculating and optimizing the average skidding distance of the forwarder was developed. It was used in stands of different sizes and formats through mathematical techniques and available functionalities in the Geographic Information System GRASS. The developed tool, called optimized model, divides the stand in small parts in relation to shorter skidding distances. The main variable considered was the alignment of plantation. The model was tested in eucalypt stands located in the State of São Paulo. Sixteen stands were randomly selected: eight with a rectangular polygon form, and eight with irregular polygon form. The main variables were collected in these stands. Results showed that the optimized model developed, is efficient and flexible. It was possible to divide the stands in small parts resulting in smaller skidding medium distances. The stands with irregular form had shorter skidding medium distances than the rectangular stands.

Otimização da distância de extração de madeira com forwarder

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Comparison of four trap types for ambrosia beetles (Coleoptera, Scolytidae) in Brazilian Eucalyptus stands

Eucalyptus spp. plantations represent >60% of the reforested area in Brazil. Although ambrosia beetle attacks on live trees were at first nonexistent, they have begun to appear with greater frequency. Monitoring for pest insects is a key factor in integrated pest management, and baited traps are one of the most widely used methods for insect population detection and survey. We compared the efficiency of the most widely used trap in Brazil to survey for ambrosia beetles and other Scolytidae, the ESALQ-84 type, with other traditionally employed traps: the multiple funnel (Lindgren trap); drainpipe; and slot (Theyson) traps, in a Eucalyptus grandis Hill ex Maiden stand in Brazil. The ESALQ-84 trap was the most efficient in trapping Hypothenemus eruditus Westwood and Hypothenemus obscurus (F.); the multiple funnel trap caught significantly more Cryptocarenus diadematus Eggers; whereas the slot trap caught more Premnobius cavipennis Eichhoff and Xyleborus affinis Eichhoff than the other traps. The drainpipe trap was the least effective trap overall. When corrected for number of beetles caught per trap surface area, catches were significantly higher on the ESALQ-84 trap for the majority of the species analyzed, probably because of a smaller trap surface area. The slot trap was recommended for it caught overall more beetles of the three most economically important scolytid species in eucalypt plantations in Brazil, P. cavipennis, X. affinis, and X, ferrugineus.

Can Eucalyptus invade native forest fragments close to commercial stands?

Some Eucalyptus species are widely used as a plantation crop in tropical and subtropical regions. One reason for this is the diversity of end uses, but the main reason is the high level of wood production obtained from commercial plantings. With the advancement of biotechnology it will be possible to expand the geographical area in which eucalypts can be used as commercial plantation crops, especially in regions with current climatic restrictions. Despite the popularity of eucalypts and their increasing range, questions still exist, in both traditional planting areas and in the new regions: Can eucalypts invade areas of native vegetation, causing damage to natural ecosystems biodiversity?The objective of this study it was to assess whether eucalypts can invade native vegetation fragments in proximity to commercial stands, and what factors promote this invasive growth. Thus, three experiments were established in forest fragments located in three different regions of Brazil. Each experiment was composed of 40 plots (1 m(2) each one), 20 plots located at the border between the forest fragment and eucalypts plantation, and 20 plots in the interior of the forest fragments. In each experimental site, the plots were paired by two soil exposure conditions, 10 plots in natural conditions and 10 plots with soil exposure (no plant and no litter). During the rainy season, 2 g of eucalypts seeds were sown in each plot, including Eucalyptus grandis or a hybrid of E. urophylla x E. grandis, the most common commercial eucalypt species planted in the three region. At 15, 30, 45, 90, 180, 270 and 360 days after sowing, we assessed the number of seedlings of eucalypts and the number of seedlings of native species resulting from natural regeneration. Fifteen days after sowing, the greatest number of eucalypts seedlings (37 m(-2)) was observed in the plots with lower luminosity and exposed soil. Also, for native species, it was observed that exposed soil improved natural germination reaching the highest number of 163 seedlings per square meter. Site and soil exposure were the factors that have the greatest influence on seed germination of both eucalypt and native species. However, 270 days after sowing, eucalypt seedlings were not observed at any of the three experimental sites. The result shows the inability of eucalypts to adapt to condition outside of their natural range. However, native species demonstrated their strong capacity for natural regeneration in forest fragments under the same conditions where eucalypts were seeded. (C) 2011 Elsevier B.V. All rights reserved.

Productivity and costs of Beller-Buncher and forest processor in stands of eucalypts in first cut

The rationalization of forest harvesting and minimization costs is a constant search by the managers involved in this process, making them decide practices which are economically viable to optimize that operation. This study aimed to evaluate technically and economically the performance of feller-buncher and the forest processor in stands of eucalypts in first cut. The technique analysis included time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. Aiming the optimization the cost of forest harvesting, the system composed by feller-buncher and processor forest presented itself as a technically and economically viable alternative to harvesting eucalypt in first cut or stands that do not have bifurcated trees.

Application of X-ray technique in nondestructive evaluation of eucalypt wood

X-rays were initially used for the inspection of special-purpose wood pieces for quantitative evaluation properties of different species. X-ray densitometry has had its use expanded ill dendroclimatology of Picea engelmannii trees. Subsequent laboratories developed applications of X-ray densitometry for environmental, wood science and technology, and related areas. This paper describes the basic methodology of X-ray densitometry applied to the eucalypt wood analysis, as well its presenting the results of applications in three areas: (i) evaluation of wood biodegradation by white rot fungi, (ii) detection of sapwood and heartwood, and (iii) determination of the effect of management oil wood properties. The wood decayed by white rot fungi was detected by X-ray densitometry with it decreasing wood density due to the biodegradation of cell wall components. The sapwood and heartwood of eucalypts were separated in response to the attenuation of X-rays, reflected by the wood anatomical structure and chemical composition. Also, Ill eucalypt trees after the application of irrigation and i characteristic wood density profiles were detected. Ill addition, the significant potential of X-ray densitometry for eucalypt wood research and analysis is discussed.

Chemical and physical attributes of two substratum for eucalypt seedling production

This work evaluated the viability of one commercial substrate with pinus bark, vermiculite and 30% of coconut fiber for Eucalyptus grandis seedlings production under different water management: 6, 8, 10, 12 e 14 mm day(-1). In relation to the substrates, it was evaluated, before and after the seedlings production, the total content of carbon, nitrogen and organic substances, pH and EC of the extract, the content of macronutrients (P, K, Ca, S, Mg) and macronutrients (B, Fe, Mn, Cu, Zn), as well as total porosity, density and water retention. It was evaluated the macro and mcronutrients accumulation in the roots and in the aerial part of the seedlings, 105 days after sowing. It was concluded that the substrates presented some distinct properties of those cited as ideal for production in containers with irrigation and fertilization. At the end of the production process, both substrates registered nutrient content little influenced by water management what would guarantee the initial development of the plants in the field.

Boron transport in Eucalyptus. 2. Identification in silico of a putative boron transporter for xylem loading in eucalypt

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of bamboo stands on seed rain and seed limitation in a rainforest

Bamboos often negatively affect tree recruitment, survival, and growth, leading to arrested tree regeneration in forested habitats. Studies so far have focused on the effects of bamboos on the performance of seedlings and saplings, but the influence of bamboos on forest dynamics may start very early in the forest regeneration process by altering seed rain patterns. We tested the prediction that the density and composition of the seed rain are altered and seed limitation is higher in stands of Guadua tagoara (B or bamboo stands), a large-sized woody bamboo native from the Brazilian Atlantic Forest, compared to forest patches without bamboos (NB or non-bamboo stands). Forty 1 m(2) seed traps were set in B and NB stands, and the seed rain was monitored monthly for 1 year. The seed rain was not greatly altered by the presence of bamboos: rarefied seed species richness was higher for B stands, patterns of dominance and density of seeds were similar between stands, and differences in overall composition were slight. Seed limitation, however, was greater at B stands, likely as a resulted of reduced tree density. Despite Such reduced density, the presence of trees growing amidst and over the bamboos seems to play a key role in keeping the seeds falling in B stands because they serve as food sources for frugivores or simply as perches for them. The loss of such trees may lead to enhanced seed limitation, contributing ultimately to the self-perpetuating bamboo disturbance cycle. (C) 2008 Elsevier B,V. All rights reserved.

Fish assemblages in stream stretches occupied by cattail (Typhaceae, Angiospermae) stands in Southeast Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Jaguarundi (Puma yagouaroundi) (Geoffroy, 1803) (Carnivora, Felidae) food habits in a mosaic of Atlantic Rainforest and eucalypt plantations of southeastern Brazil

A dieta de uma população de jaguarundi (Puma yagouaroundi) (Geoffroy, 1803) (Carnivora, Felidae) foi estudada entre novembro de 2000 e novembro de 2001, em 24,9 km² de mosaico de Mata Atlântica secundária e reflorestamento de eucalipto na Serra de Paranapiacaba, São Paulo, Brasil. A análise das 26 amostras fecais e regurgitadas, obtidas em 570.1 km de percurso, indicou o consumo de 19 itens alimentares em um total de 74 ocorrências de presas. Pequenos mamíferos foram os itens mais frequentemente encontrados na dieta (42,5%), seguidos por aves (21%), répteis (14%) e mamíferos de tamanho médio (3%). A porcentagem de ocorrência (PO) sugere que a dieta concentra-se, principalmente, em pequenos roedores (30%) e aves (21%). Foi também registrada a predação sobre serpentes da família Viperidae. A amplitude de nicho alimentar padronizada (Bsta = 0,76) mostra uma dieta generalista, entretanto, os dados sugerem que o jaguarundi consome principalmente pequenos vertebrados (mamíferos, aves ou répteis), sobretudo, espécies terrestres.

Determinação de fósforo microbiano: comparação entre métodos e coberturas florestais

Muitos trabalhos mostram a importância da biomassa microbiana do solo (BMS), principalmente como fonte/dreno de C e de N em plantações florestais; contudo, são escassos os trabalhos relacionados ao fósforo microbiano (PBM), sobretudo aqueles relativos aos métodos de determinação do PBM nesses ecossistemas. O presente trabalho foi realizado com o objetivo de avaliar métodos de determinação do PBM em solo com diferentes coberturas vegetais. O trabalho consistiu da análise de amostras de Latossolo Vermelho-Amarelo distrófico muito argiloso (LVAd) localizado no município de Viçosa (MG), coletadas nas profundidades de 0 a 5 e 5 a 10 cm, em áreas com as seguintes coberturas vegetais: pínus (Pinus taeda), eucalipto (Eucalyptus grandis) e floresta nativa. Para determinação do P microbiano, foram empregados os métodos fumigação-extração (FE), irradiação com micro-ondas-extração (IE) e irradiação com micro-ondas-extração com membrana de troca aniônica (EMTA). em termos gerais, menores teores de PBM foram obtidos com o método irradiação-extração. Considerando a cobertura vegetal, foi detectada diferença significativa entre os três métodos sob floresta de eucalipto e floresta nativa, principalmente na camada superficial. Sob pínus, apenas o método IE diferiu dos demais, na camada subsuperficial. Menores coeficientes de variação (CV) foram obtidos com o FE, retratando maior precisão do método. Entretanto, o método IE mostrou-se, em termos operacionais, o mais adequado à determinação do PBM quando se tem maior número de amostras. Com relação às coberturas vegetais, a grande variabilidade observada nos CVs obtidos para cada cobertura, nos três métodos testados, inviabiliza a escolha de um único método que apresente maior precisão na avaliação do PBM.