Wolf presence in the ranch of origin: Impacts on temperament and physiological responses of beef cattle following a simulated wolf encounter

This experiment evaluated temperament, vaginal temperature, and plasma cortisol in beef cows from wolf-naive and wolf-experienced origins that were subjected to a simulated wolf encounter. Multiparous, pregnant, nonlactating Angus-crossbreed cows from the Eastern Oregon Agricultural Research Center located near Burns, OR (CON; n = 50), and from a commercial operation near Council, ID (WLF; n = 50), were used. To date, grey wolves are not present around Burns, OR, and thus CON were naive to wolves. Conversely, wolves are present around Council, ID, and WLF cows were selected from a herd that had experienced multiple confirmed wolf-predation episodes from 2008 to 2012. Following a 50-d commingling and adaptation period, CON and WLF cows were ranked by temperament, BW, and BCS and allocated to 5 groups (d 0; 10 CON and 10 WLF cows/group). Groups were individually subjected to the experimental procedures on d 2 (n = 3) and d 3 (n = 2). Before the simulated wolf encounter, cow temperament was assessed and blood samples and vaginal temperatures (using intravaginal data loggers) were collected (presimulation assessments). Cows were then sorted by origin, moved to 2 adjacent drylot pens (10 WLF and 10 CON cows/pen), and subjected to a simulated wolf encounter event for 20 min, which consisted of 1) cotton plugs saturated with wolf urine attached to the drylot fence, 2) continuous reproduction of wolf howls, and 3) 3 leashed dogs that were walked along the fence perimeter. Thereafter, WLF and CON cows were commingled and returned to the handling facility for postsimulation assessments, which were conducted immediately after exposure to wolf-urine-saturated cotton plugs, wolf howl reproduction, and 20-s exposure to the 3 dogs while being restrained in a squeeze chute. Chute score, temperament score, and plasma cortisol concentration increased (P <= 0.01) from pre- to postsimulation assessment in WLF but did not change in CON cows (P >= 0.19). Exit velocity decreased (P = 0.01) from pre-to postsimulation assessment in CON but did not change (P = 0.79) in WLF cows. In addition, WLF cows had a greater (P = 0.03) increase in temperature from pre-to postsimulation assessments compared with CON cows. In conclusion, the simulated wolf encounter increased excitability and fear-related physiological stress responses in cows that originated from a wolf-experienced herd but not in cows that originated from a wolf-naive herd.

The Predation of Artemia Nauplii by the Larvae of the Amazon River Prawn, Macrobrachium amazonicum (Heller, 1862), is Affected by Prey Density, Time of Day, and Ontogenetic Development

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vortex-Antivortex Dynamics in a Mesoscopic Superconducting Prism with a Centered Antidot

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vortex-antivortex annihilation dynamics in a square mesoscopic superconducting cylinder

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Unsuccessful attacks dominate a drone-preying wasp's hunting performance near stingless bee nests

Bee males (drones) of stingless bees tend to congregate near entrances of conspecific nests, where they wait for virgin queens that initiate their nuptial flight. We observed that the Neotropical solitary wasp Trachypus boharti (Hymenoptera, Cabronidae) specifically preys on males of the stingless bee Scaptotrigona postica (Hymenoptera, Apidae); these wasps captured up to 50 males per day near the entrance of a single hive. Over 90% of the wasp attacks were unsuccessful; such erroneous attacks often involved conspecific wasps and worker bees. After the capture of non-male prey, wasps almost immediately released these individuals unharmed and continued hunting. A simple behavioral experiment showed that at short distances wasps were not specifically attracted to S. postica males nor were they repelled by workers of the same species. Likely, short-range prey detection near the bees' nest is achieved mainly by vision whereas close-range prey recognition is based principally on chemical and/or mechanical cues. We argue that the dependence on the wasp's visual perception during attack and the crowded and dynamic hunting conditions caused wasps to make many preying attempts that failed. Two wasp-density-related factors, wasp-prey distance and wasp-wasp encounters, may account for the fact that the highest male capture and unsuccessful wasp bee encounter rates occurred at intermediate wasp numbers.

Population dynamics, sex ratio and size at sex change in a protandric simultaneous hermaphrodite, the spiny shrimp Exhippolysmata oplophoroides

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of Mortality in Africanized Honey Bee Colonies with High Levels of Infestation by Varroa destructor

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A comparative tunnelling network approach to assess interspecific competition effects in termites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Spatial variation in post-dispersal seed removal in an Atlantic forest: Effects of habitat, location and guilds of seed predators

Studies of post-dispersal seed removal in the Neotropics have rarely examined the magnitude of seed removal by different types of granivores. The relative impact of invertebrates, small rodents, and birds on seed removal was investigated in a 2,178 ha Atlantic forest fragment in southeastern Brazil. We used popcorn kernels (Zea mays-Poaceae) to investigate seed removal in a series of selective exclosure treatments in a replicated, paired design experiment that included forest understory, gaps, and forest edge sites. We recorded the vegetation around the experimental seed stations in detail in order to evaluate the influence of microhabitat traits on seed removal. Vertebrate granivores (rodents and birds) were surveyed to determine whether granivore abundance was correlated with seed removal levels. Seed removal varied spatially and in unpredictable ways at the study site. Seed encounter and seed use varied with treatments, but not with habitat type. However, seed removal by invertebrates was negatively correlated with gap-related traits, which suggested an avoidance of large gaps by granivorous ants. The abundance of small mammals was remarkably low, but granivorous birds (tinamous and doves) were abundant at the study site. Birds were the main seed consumers in open treatments, but there was no correlation between local granivorous bird abundance and seed removal. These results emphasize the stochastic spatial pattern of seed removal, and, contrary to previous studies, highlight the importance of birds as seed predators in forest habitats. (c) 2007 Elsevier Masson SAS. All rights reserved.

Aggressive Behavior and Performance in the Tegu Lizard Tupinambis merianae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sentinels in Saltator atricollis (Passeriformes: Emberizidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dança, corpo e desenho: arte como sensação

Este trabalho busca refletir sobre o estatuto do corpo e do movimento nas artes a partir da noção de sensação, como empregada no pensamento do filósofo francês Gilles Deleuze. Tal propósito se fará a partir do singular encontro entre os trabalhos de um pintor/desenhista e um dos mais emblemáticos bailarinos clássicos. O corpo em movimento, quando atinge o estado de dança, não se reduz a uma forma, a uma representação, nem a uma mecânica. Antes, pelo contrário, sua leveza singular afeta-nos sobremaneira. Tal afecção será tomada como fio condutor de nossa análise, tendo em vista as diferentes sensações e expressões que pode suscitar. A sensação de um corpo que dança pode expressar-se na dança em si como também no desenho. Que relações esses diferentes meios de expressão do corpo dançarino podem estabelecer entre si? Que acontecimentos singulares podem emergir nesse encontro particular? Antes que forma, linhas de força e expressão. Corpo-vibração, torrente de afectos e perceptos, constituindo sensações que diferentes meios artísticos expressam diferentemente.

Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners

Statement of problem. Two problems found in prostheses with soft liners are bond failure to the acrylic resin base and loss of elasticity due to material aging.Purpose. This in vitro study evaluated the effect of thermocycling on the bond strength and elasticity of 4 long-term soft denture liners to acrylic resin bases.Material and methods. Four soft lining materials (Molloplast-B, Flexor, Permasoft, and Pro Tech) and 2 acrylic resins (Classico, and Lucitone 199) were processed for testing according to manufacturers' instructions. Twenty rectangular specimens (10 X 10-mm(2) cross-sectional area) and twenty cylinder specimens (12.7-mm diameter X 19.0-mm height) for each liner/resin combination were used for the tensile and deformation tests, respectively. Specimen shape and liner thickness were standardized. Samples were divided into a test group that was thermocycled 3000 times and a control group that was stored for 24 hours in water at 37degreesC. Mean bond strength, expressed in megapascals (Wa), was determined in the tensile test with the use of a universal testing machine at a crosshead speed of 5 mm/min. Elasticity, expressed as percent of permanent deformation, was calculated with an instrument for measuring permanent deformation described in ADA/ANSI specification 18. Data from both tests were examined with 1-way analysis of variance and a Tukey test, with calculation of a Scheffe interval at a 95% confidence level.Results. In the tensile test under control conditions, Molloplast-B (1.51 +/- 0.28 MPa [mean SD]) and Pro Tech (1.44 +/- 0.27 MPa) liners had higher bond strength values than the others (P < .05). With regard to the permanent deformation test, the lowest values were observed for Molloplast-B (0.48% +/- 0.19%) and Flexor (0.44% +/- 0.14%) (P < .05). Under thermocycling conditions, the highest bond strength occurred with Molloplast-B (1.37 +/- 0.24 MPa) (P < .05) With regard to the deformation test, Flexor (0.46% +/- 0.13%) and Molloplast-B (0.44% +/- 0.17%) liners had lower deformation values than the others (P < .05).Conclusion. The results of this in vitro study indicated that bond strength and permanent deformity values of the 4 soft denture liners tested varied according to their chemical composition. These tests are not completely valid for application to dental restorations because the forces they encounter are more closely related to shear and tear. However, the above protocol serves as a good method of investigation to evaluate differences between thermocycled and control groups.

On the scattering of comets by a planet

In this paper, numerical simulations are made, using the three-dimensional restricted three-body problem as the mathematical model, to calculate the effects of a swing-by with the planet Saturn in the orbit of a comet. To show the results, the orbit of the comet is classified in four groups: elliptic direct, elliptic retrograde, hyperbolic direct and hyperbolic retrograde. Then, the modification in the orbit of the comet due to the close approach is shown in plots that specify from which group the comet's orbit is coming and to which group it is going. Several families of orbits are found and shown in detail. An analysis about the trends as parameters (position and velocity at the periapse) vary is performed and the influence of each of them is shown and explained. The result is a collection of maps that describe the evolution of the trajectory of the comet due to the close approach. Those maps can be used to estimate the probability of some events, like the capture or escape of a comet. An example of this technique is shown in the paper. (C) 2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

The strands of the F ring disturbed by its closest satellites

Some Voyager images showed that the F ring of Saturn is composed of at least four separate, non-intersecting, strands covering about 45 degrees in longitude. According to Murray et al. [Murray, C.D., Gordon, M., Giuliatti Winter, S.M. Unraveling the strands of Saturn's F ring. Icarus 129, 304, 1997.] this structure may be caused by undetected satellites embedded in the gaps.Due to precession, the satellites Prometheus and Pandora and the ring particles can experience periodic close encounters. Giuliatti Winter et al. [Giuliatti Winter, S.M, Murray, C.D., Gordon, M. Perturbations to Saturn's F-ring strands at their closest approach to Prometheus. Plan. Space Sciences, 48, 817, 2000.] analysed the behaviour of these four strands at closest approach with the satellite Prometheus. Their work suggests that Prometheus can induce the ring particles to scatter in the direction of the planet, thus increasing the population of small bodies in this region.In this work we analysed the effects of Prometheus on the radial structure of Saturn's F ring during the Voyager and early Cassini epochs. Our results show that at Voyager epoch Prometheus, and also Pandora, had a negligible influence in the strands. However, during the Cassini encounter Prometheus could affect the strands significantly, scattering particles of the inner strand in the direction of the planet. This process can contribute to the replenishment of material in the region between the F ring and the A ring, where two rings have recently been discovered [Porco, C. et al. Cassini imaging science. Initial results on Saturn's rings and small Satellites. Science, 307, 1226, 2005].We also analyse the behaviour of undetected satellites under the effects of these two satellites by computing the Lyapunov Characteristic Exponent. Our results show that these satellites have a chaotic behaviour which leads to a much more complex scenario. The new satellite S/2004 S6 also presents a chaotic behaviour with can alter the dynamic of the system, since this satellite crosses the orbit of the strands. (C) 2006 COSPAR. Published by Elsevier Ltd. All rights reserved.