Influence of the grinding wheel's dive speed on the damage of rectified hardened steels

The world tendency is the increase of the productivity and the production of pieces more and more sophisticated, with high degree of geometric and dimensional tolerances, with good surface finish and low cost. Rectification is responsible for the final finish in the machining process of a material. However, damages generated in this production phase affect all the resources used in the previous processes. Great part of the problems happennig in the rectification process is due to the enormous temperature generated in this activity because of the machining conditions. The dive speed, which is directly related to the productivity, is considered responsible for the damages that occur during rectification, limiting its values to those that do not cause such damages. In this work, through the variation of the dive speed in the process of cylindrical grinding of type ABNT D6 steel, rationalizing the application of two cutting fluids and using a CBN (cubic boron nitrate) abrasive wheel with vitrified blond, the influence of the dive speed on the surface damages of hardened steels was evaluated. The results allowed to say that the dive speed, associated to an efficient cooling and lubrication, didn't provoke thermal damages (including heated zones, cracks and tension stresses) to the material. Residual stresses and the roughness of rectified materials presented a correlation with the machining conditions. The work concluded that it is possible to increase the productivity without provoking damages in the rectified components.

Lactate sequestration by osteoderms of the broad-nose caiman, Caiman latirostris, following capture and forced submergence

Lactate accumulation in osteoderms; of the broad-nose caiman, Caiman latirostris, was determined following capture and surgery and after a period of forced submergence and related to concurrent values in blood. Control samples of bone and blood were taken after recovery from surgery and before submergence. In addition, samples of osteoderm were incubated in a lactate solution to determine equilibrium concentration, and additional samples were analyzed for elemental and CO2 concentrations. The composition of the osteoderms closely resembles that of typical vertebrate bone, with a high concentration of calcium and phosphate. Plasma and osteoderm lactate concentrations were both elevated following surgery and decreased significantly after 1 day of recovery. Submergence produced a typical lactate pattern in the plasma, with only a modest increase during the dive and then a sharp increase during recovery to a peak of 31.2 +/- 1.9 mumol ml(-1) after 1 h. When caimans were anesthetized 2 h after submergence, osteoderm lactate in the same animals was significantly increased to 14.8 mumol g(-1) wet mass. The ratio of the osteoderm: plasma lactate concentration after submergence was similar to the ratio observed in the incubated samples, suggesting that osteoderm lactate concentrations in vivo were equilibrated with circulating plasma levels. We conclude that caiman osteoderms sequester lactate during lactic acidosis and that the time course is fast enough to have benefit to these animals following normal anaerobic burst activity.

Influência da velocidade de avanço do rebolo nos danos de aços endurecidos retificados

A tendência mundial é o aumento da produtividade e da produção de peças cada vez mais sofisticadas, com elevado grau de tolerância geométrica, dimensional, com bom acabamento superficial, com baixo custo. A retificação é responsável pelo acabamento final no processo de usinagem de um material. No entanto, danos gerados nesta fase de produção comprometem todos os recursos utilizados nas fases anteriores. Grande parte dos problemas ocorridos na retificação deve-se à enorme temperatura gerada pelo processo devido às condições de usinagem. Atribui-se à velocidade de avanço, que está diretamente relacionada com a produtividade, os danos ocorridos na retificação, ficando esta variável limitada até valores que não proporcione danos. Neste trabalho, através da variação da velocidade de avanço no processo de retificação cilíndrica externa do aço ABNT D6, racionalizando a aplicação de dois fluidos de corte e usando um rebolo superabrasivo de CBN (nitreto de boro cúbico) com ligante vitrificado, avaliou-se a influência da velocidade de avanço nos danos superficiais de aços endurecidos. Os resultados permitiram concluir que a velocidade de avanço associada a uma eficiente refrigeração e lubrificação, não provocou danos térmicos (queima, trincas, tensões de tração) ao material. Tensões residuais e a rugosidade do material retificado apresentaram uma correlação com as condições de usinagem. O trabalho concluiu ser capaz um aumento dos índices de produtividade sem provocar danos nos componentes retificados.

Efeito da rampa isolante na insensibilização de frangos de corte e seus reflexos sobre o bem-estar e qualidade da carcaça

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Histórias de pescadores: memórias de vidas submersas

Pós-graduação em Psicologia - FCLAS

Plantas de cobertura, fontes de nitrogênio e fornecimento de molibdênio no cultivo de arroz de terras altas em sistema de plantio direto

Pós-graduação em Agronomia - FEIS

Análise da influência da velocidade de mergulho na retificação de aços endurecidos utilizando refrigeração otimizada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O projeto de formação continuada de alfabetizadores do programa São Luís te quero lendo e escrevendo: pressupostos teóricos, práticas pedagógicas e contradições

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A maldição das palavras e o sujeito dilacerado de Marcelo Mirisola (2009)

There is an area in the Brazilian Contemporary Literature which is articulated according to the first person narrator who presents the problematic of the own creational action, the expression of a conflictual subjectivity divided between the vertiginous dive into itself – what would imply in a renounce of the world and the reality, where the authors’ work are their only matter – and the social participation - not as an awareness, but as the recognition of the limits and impasses which the real representation imposes on the creative writing. Therefore, this article proposes a reading on the novel O Azul do Filho Morto (2002) by Marcelo Mirisola, to try to situate him into the recent Brazilian literary production, as well as to reflect on his narrative the complex notion of authorship which is called into question on his novels, since they produce an intrincate imbrication between the fictional subject and the empirical image of the writer himself, breaking and confusing the limits between the fictional discourse and the extralinguistic reality which is evoked, manipulated, distorted and made unstable on his representational process.