Vertical marginal discrepancy of ceramic copings with different ceramic materials finish lines and luting agents: An in vitro evaluation

Statement of problem. Prosthetic restorations that fit poorly may affect periodontal health and occlusion. Studies that have evaluated the accuracy of fit of ceramic restorations before and after cementation assessed primarily intracoronal restorations.Purpose. This in vitro study evaluated the effect of different finish lines, ceramic manufacturing techniques, and luting agents on the vertical discrepancy of ceramic copings.Material and methods. Two stainless steel molars were prepared for complete crowns with 2 different finish lines (heavy chamfer and rounded shoulder); each molar was duplicated to fabricate 90 copings. A total of 180 copings generated 18 groups (n=10 for each finish line-coping material-luting agent combination). Luting agents tested included zinc phosphate, resin-modified glass ionomer (Fuji Plus), and resin composite cements (Panavia F). A metal frame was developed on which to screw the stainless steel model and a ceramic coping; the distance (mum) between 2 predetermined points was measured before and after cementation by a profile projector under a torquing force. A 4-way ANOVA with repeated measurements was performed to assess the influence of each factor in the vertical marginal discrepancy: 3 between-coping factors (finish line-coping material-luting agent) and 1 within-coping factor (before and after cementation) (alpha=.05).Results. Procera copings presented the lowest mean values (P<.05) of vertical marginal discrepancy before and after cementation (25/44 mum) when compared to Empress 2 (68/110 mum) and InCeram Alumina copings (57/117 mum), regardless of any combinations among all finish lines and luting agents tested.Conclusion. Considering each factor separately, the ceramic manufacturing technique appeared to be the most important factor tested for the definitive vertical discrepancy of all-ceramic copings, with lower mean values for Procera copings.

Período de mínima atividade solar: melhora no desempenho do posicionamento relativo

In the relative positioning, even considering that part of the errors due to ionosphere is canceled with the double-difference observations, strong ionospheric effects can occur in maximum solar activity period. However, in minimum solar activity period, the ionospheric effects decrease significantly and therefore an improvement of the relative positioning performance takes place. In this paper we aim at showing that improvement for the scientific and GPS community users. So, have been experiments by using GPS data of two stations of the Brazilian Network for Continuous Monitoring of GPS, forming a baseline of 430 km. The processing were use accomplished with interval of two hours, and only L1 carrier data have been used. The analysis of the obtained results has been carried out from the discrepancies between the "true" coordinates and corresponding ones obtained in the processing. In maximum solar activity period the discrepancy value reached 25 m. on the other hand, in minimum solar activity period, the discrepancy value reached 5,5 m. It is important to emphasize that the majority of the discrepancy values didn't exceed 0,50 m, and in some cases only reached 0,10 m. This shows the increase of application possibilities of the relative positioning using single-frequency GPS receivers in minimum solar activity period.

Muscle lesion treatment in Brazilian soccer players: Theory vs. Practice

Background: In this study we evaluated the rehabilitation profile of Brazilian soccer players which underwent lower limb muscle lesions.Methods: This is a descriptive investigation. We evaluated 139 professional soccer players (1724 years old). We evaluated the following variables: muscle lesion diagnosis, symptoms, non steroidal anti-inflammatory used, physiotherapy treatment, which physiotherapy recourses was used if treated and train adaptation.Results: In great part of the athletes muscle lesion remained between 2 weeks and 1 month. Around 54% were diagnosed by a physician; the other part was diagnosed by a physical therapist. Non steroidal anti-inflammatory were prescribed by physicians in 42% of the cases; in 7% the physical therapist prescribed the medication while in 49% of the cases the masseur prescribed the drug. More than 1/4 of the athletes received physiotherapy treatement between 48 hours and 5 days. Isometric exercise therapy was applied in 15% of the cases. 63% were not accompanied by the physiotherapist on their return to the field. 48% received massages immediately after injury.Conclusion: We presented discrepancy between the recommended theory described by several researches and the practice. We indicate the necessity of recycling in a general context the rehabilitation of muscle injuries.

Photopyroelectric spectroscopy of polyaniline films

Photopyroelectric spectroscopy (PPES), in the 400 < lambda < 900 nm wavelength range, was used to study thermal properties of differently doped polyaniline (PAN) films. The photopyroelectric intensity signal V-n(lambda) and its phase F-n(lambda) were independently measured, as well as the intensity V-n(f) and the phase F-n(f) (f being the chopping frequency) for a given A of the saturation part of the PPES spectrum. Equations of both the intensity and the phase of the PPES signal, taking into account the thermal and the optical characteristics of the PAN films and the pyroelectric detector, were used to fit the experimental results. From the fittings we obtained, with great accuracy, the values of thermal conductivity k and thermal diffusivity coefficient a of PAN films of different doping degrees. It was observed that, in contrast with the strong doping-dependence of the electrical conductivity, the thermal parameters of PAN films remained practically unchanged under doping. This apparent discrepancy is explained by the granular metal model of doped PAN. (C) 2000 John Wiley & Sons, Inc.

Mathematical modeling of the ester oil-refrigerant R134A mixture two-phase flow with foam formation through a small diameter tube

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Consistência na indexação em bibliotecas universitárias brasileiras

The aim of this paper is to evaluate the consistency indexes among 30 Brazilian university libraries from the south and south-east regions through a specific mathematical formula. It was selected a sample of 30 university libraries that, according to the information in their official sites, have a collection consisted of more than 100.000 copies and allow the search into the on-line catalog. Searches were carried out in every university by means of their sites, requesting books that contained a certain word in its title and were printed in a certain year. The response was a list of available titles in the library, from which we chose at random a title and asked to visualize the complete record to verify the existence of a given subject. This procedure was repeated until we found the same title in five libraries with the chosen subjects. The result is 10 trials, each one consisting of one figure and one table showing the selected libraries, the subjects, the documentary languages ( tools) and the consistency indexes relaxed and rigid. These trials show great discrepancy between the values of consistency indexes with intervals between 73,3% to 34,4% in the relaxed index, and between 60% and 9,6% in the rigid one. It was revealed that the coincidence in determining the subjects is not too high remaining below 39%. It is concluded that the difference between the consistency indexes may be due to factors as: incompatibility among documentary languages; lack of updating of these languages so as to follow the knowledge evolution; absence of a well-defined indexing policy with guidelines clearly established. Procedures of indexing followed by indexers could contribute to the consistency index to be bigger in percentage, since there would be parameters for the indexing process.

Candida spp.: manual identification (reference method) and automated identification (Vitek system platform)

Yeasts are becoming a common cause of nosocomial fungal infections that affect immunocompromised patients. Such infections can evolve into sepsis, whose mortality rate is high. This study aimed to evaluate the viability of Candida species identification by the automated system Vitek-Biomerieux (Durham, USA). Ninety-eight medical charts referencing the Candida spp. samples available for the study were retrospectively analyzed. The system Vitek-Biomerieux with Candida identification card is recommended for laboratory routine use and presents 80.6% agreement with the reference method. By separate analysis of species, 13.5% of C. parapsilosis samples differed from the reference method, while the Vitek system wrongly identified them as C. tropicalis, C. lusitaneae or as Candida albicans. C. glabrata presented a discrepancy of only one sample (25%), and was identified by Vitek as C. parapsilosis. C. guilliermondii also differed in only one sample (33.3%), being identified as Candida spp. All C. albicans, C. tropicalis and C. lusitaneae samples were identified correctly.

A complete dosimetric characterization of two Sr-90-Y-90 dermatologic applicators

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

COMPARATIVE EVALUATION of OCULOMETRIC VARIABLES IN GRAVES' OPHTHALMOPATHY

OBJECTIVES: To estimate oculometric parameters of Graves' ophthalmopathy in comparison to healthy eyes using digital photography and digital image analysis.INTRODUCTION: Graves' ophthalmopathy is the main cause of eye proptosis. Because these protrusions cause clinically perceived distortions in orbital architecture, digital photographs can be used to detect and quantify these changes.METHODS: We carried out a cross-sectional study comprising 12 healthy volunteers and 15 Graves' ophthalmopathy patients with the purpose of evaluating the use of simple, non-invasive digital photography to estimate oculometric parameters of Graves' ophthalmopathy and compare them with the parameters of unaffected eyes. Facial photographs of cases and controls were taken in a standardized manner. Oculometric parameters were compared between the groups and then correlated to proptometer measures.RESULTS: All estimated oculometric variables showed significant differences between the groups, in particular with regard to mediopupilar aperture, lateral height, distance from the iris edge to the lateral boundary of the palpebral fissure, and distance from the higher point of the iris to the lateral limit of the palpebral fissure. The product of medial aperture and horizontal palpebral fissure also revealed greater discrepancy between the groups. Proptometer measures showed significant linear correlation between the distance from the iris edge to the lateral boundary of the palpebral fissure and between the distance from the higher point of the iris to the lateral limit of palpebral fissure (p<0.05).CONCLUSIONS: Comparative analysis of oculometric parameters in Graves' ophthalmopathy suggests that eye proptosis is related to an asymmetric increase in lateral oculometric measures. Standardized digital photographs can be used in clinical practice to objectively estimate oculometric parameters of Graves' ophthalmopathy patients.

Acute shortening and subsequent lengthening of the radius and ulna for the treatment of an infected nonunion in a dog

A 3-year-old, male crossbred dog with osteomyelitis of the radius and ulna was treated using Ilizarov's method. Two centimeters of infected bone was resected, then acute bone shortening and subsequent lengthening of a healthy bone site were performed. The infection was eradicated, but a residual leg-length discrepancy was present.

Programa de extrações seriadas: variáveis relacionadas com a extração de pré-molares

OBJETIVO: verificar o percentual de pacientes que necessitaram extração de dentes permanentes, pré-molares, dentre aqueles tratados com extração de dentes decíduos para correção do apinhamento primário na dentição mista, bem como analisar as possíveis variáveis relacionadas. MÉTODOS: a amostra foi composta por documentações ortodônticas de 70 pacientes na dentição permanente, cujo tratamento iniciou-se na dentição mista com planejamento de um programa de extrações seriadas (PES). Todos os prontuários foram analisados por um único examinador, no intuito de verificar se o PES havia sido cumprido com a extração de dentes permanentes ou se havia sido realizada apenas extração de dentes decíduos. Verificou-se a associação entre a extração de dentes permanentes e as variáveis padrão facial; relação sagital entre as arcadas dentárias; IMPA; proporção tamanho do segundo molar permanente inferior/espaço retromolar; mecânica de controle de espaço e discrepância de modelo (teste exato de Fisher para as variáveis categóricas e modelo de regressão logística para as variáveis numéricas). Os resultados foram considerados para p<0,05. RESULTADOS: dos pacientes que haviam sido tratados com extração de dentes decíduos para a correção do apinhamento na dentição mista, 70% necessitaram de extração de dentes permanentes. A análise estatística não mostrou associação significativa entre as variáveis estudadas e a necessidade de extração de dentes permanentes, com exceção da variável discrepância de modelo. CONCLUSÃO: a discrepância de modelo representou a principal determinante de extração de pré-molares no PES.

Distribution of biotypes and leukotoxic activity of Aggregatibacter actinomycetemcomitans isolated from Brazilian patients with chronic periodontitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A discrepância de tamanho dentário, de Bolton, na oclusão normal e nos diferentes tipos de más oclusões, bem como sua relação com a forma de arco e o posicionamento dentário

Esta pesquisa teve como objetivo geral avaliar a discrepância de tamanho dentário, na oclusão normal e nos diferentes tipos de más oclusões e a sua relação com as medidas que determinam a forma de arco e o posicionamento dentário na região anterior. Para tanto, foram estudados 185 pares de modelos de gesso, divididos em 4 grupos: Grupo 1 (composto por 41 pares com Oclusão Normal, sendo 20 do gênero masculino e 21 do gênero feminino); Grupo 2 (composto por 44 pares com má oclusão de Classe I, divisão 1, sendo 22 do gênero masculino e 22 do gênero feminino); Grupo 3 (composto por 54 pares com má oclusão de Classe II, sendo 28 do gênero masculino e 26 do gênero feminino) e Grupo 4 (composto por 46 pares com Classe III, sendo 23 do gênero masculino e 23 do gênero feminino). Observou-se que não ocorreu dimorfismo sexual entre as discrepâncias de tamanho dentário e os diferentes tipos de oclusão dentária; as proporções estabelecidas por Bolton não se aplicaram ao grupo com Oclusão Normal; na Oclusão Normal, Classe I, Classe II e Classe III, houve um predomínio de excesso dentário total (RAZ12) no arco inferior; na Classe I houve uma igualdade na distribuição de excesso dentário anterior (RAZ6) nos arcos superior e inferior; na Oclusão Normal, Classe II e Classe III, ocorreu um predomínio de excesso dentário anterior (RAZ6) no arco inferior, em relação ao arco superior; os excessos dentários não contribuíram na ocorrência das más oclusões e as discrepâncias total e anterior (RAZ12 e RAZ6) não interferiram diretamente nas larguras e comprimentos dos arcos, bem como no posicionamento dos dentes anteriores.

Análise de Bolton: uma proposta alternativa para a simplificação de seu uso

INTRODUÇÃO: as discrepâncias entre o tamanho mesiodistal dos dentes superiores e inferiores e seus efeitos sobre a oclusão têm sido relatados há muito tempo. O método proposto por Bolton para o diagnóstico de discrepância de tamanho dentário é, inegavelmente, um dos mais difundidos no meio ortodôntico, devido à sua relativa simplicidade. Entretanto, a aplicação desse método requer cálculos matemáticos e o uso de tabelas que, muitas vezes, inviabilizam a sua utilização durante a avaliação clínica. OBJETIVO: avaliar o método proposto por Wolford, que não requer o uso de tabelas, como alternativa ao método tradicional de Bolton. MÉTODOS: a amostra foi composta por 90 pares de modelos dentários iniciais de pacientes adultos, com diferentes más oclusões. A proporção entre os dentes inferiores e superiores foi calculada para cada paciente, resultando na obtenção de dois índices (a razão total e a razão anterior). Os índices foram obtidos por meio do método originalmente proposto por Bolton e por um método alternativo, composto por duas fórmulas (uma simplificada e a variação da mesma), que foram analisadas separadamente. RESULTADOS: comparadas ao método de Bolton, as fórmulas simplificadas mostraram uma tendência de superestimar as discrepâncias dentárias inferiores (total e anterior), embora em pequena proporção. CONCLUSÕES: ambas as fórmulas do método alternativo podem ser utilizadas em substituição ao método tradicional, uma vez que mostraram diferenças médias menores que 0,58mm quando comparadas ao método de Bolton, não apresentando, portanto, significância clínica.

Evaluation of Patients' Perceptions of Alterations After Chin Bone Graft Harvesting

Objective: To evaluate patients' perceptions of alterations occurring after chin bone harvesting.Materials and Methods: Thirty patients were evaluated subjectively by visual analog scale-related sensitivity, facial aesthetics, eating, speaking, and lower lip movement, during 12 months. Objective analysis used the static light touch neurosensorial test. The statistical analysis was executed with Friedman test with P < 0.05 for both samples.Results: Subjective analysis revealed no alterations (1) to facial aesthetics, eating, speaking or lower lip movement but sensitivity of the mental region went from a lot of alteration initially (5) to little at the end of the study (3). Objective analysis results showed normal sensitivity (1) in the region after 12 months.Conclusion: The discrepancy between subjective and objective analyses may be indicative of the limited precision of clinical testing for subjective impressions assessment. (Implant Dent 2012;21:411-414)