Sperm motility of Prochilodus lineatus in relation to dilution rate and temperature of the activating medium

The objective of this study was to assess the effects of an activating solution on the sperm motility duration (SMD) of 'curimbatá', Prochilodus lineatus through of the definition of qualitative and quantitative parameters of the semen pool used in the experiment; evaluation of the effects of different ratios of semen dilution corresponding to 1-:-1, 1-:-2, 1-:-20, 1-:-200, 1-:-2000, 1-:-20-000 and 1-:-100-000 semen:dilute solution on the SMD and, assessment of the effects of different temperatures of the activating solution (5, 10, 15, 20, 25, 30, 35, 40, 45 and 50°C) on the SMD. The results of SMD were directly proportional to the dilution (P<0.05), starting from the dilution of 1-:-2 (semen:water), with 23.04-s. Were used three replicates of the semen pool for each test. Two-year-old brookstock were maintained in ponds culture conditions. In November-December 2006, twelve mature males broodfish were selected (mean weight and length of 405.8±134.2-g and 25.6±3.1-cm, respectively). The males released that semen under slight pressure of the urogenital papilla were selected for the experiment. The SMD increased proportionally to the increase in dilution, until it reached a maximum of 28.83-s for the ratio 1-:-100-000 semen: dilute solution. The results of SMD in relation to the temperature of the activating solution exhibited a quadratic behavior (P<0.05) with a maximum theoretical performance in terms of sperm motility duration of 21.36-s at a temperature of 17.3°C. Thus, for the species considered, the increase in the dilution ratio proved favorable for the rise in motility duration until the maximum value studied of 1-:-100-000 semen:dilute solution. As for the temperature of the activating solution, the best results of SMD were obtained at the temperature of 17.3°C. At higher temperatures used in the experiment (25, 30, 35, 40, 45 and 50°C), a decrease in motility duration. © 2010 Blackwell Verlag, Berlin.

Cinética digestiva e eficiência de síntese de proteína microbiana em novilhos alimentados com farelo de girassol e diferentes fontes energéticas

Objetivou-se avaliar o efeito da substituição parcial do milho pela casca de soja e pelo farelo de gérmen de milho sobre a produção e eficiência de síntese de proteína microbiana e sobre as taxas de diluição e passagem ruminal. Foram utilizados três novilhos de corte, mestiços, canulados no rúmen e no duodeno, distribuídos em dois delineamentos em quadrado latino 3 x 3. As dietas experimentais, à base de silagem de milho (60%), apresentavam como fonte de proteína farelo de girassol e, como fonte de energia, milho (MI) ou sua substituição parcial pela casca de soja (CS) ou pelo farelo de gérmen de milho (FGM). Para o isolamento da massa microbiana, foram coletadas amostras de conteúdo ruminal às 3, 6, 9 e 12 horas após a alimentação. Utilizaram-se RNA como marcador microbiano e dicromato de sódio e Co-EDTA como indicadores das taxas de passagem e de diluição, respectivamente. A composição dos microrganismos ruminais não foi influenciada pelas dietas experimentais ou pelos horários de coleta. Não houve diferenças significativas no fluxo de matéria orgânica, carboidratos totais, nitrogênio e nitrogênio microbiano para o duodeno e na eficiência de síntese de proteína microbiana. As taxas de diluição foram semelhantes entre as dietas, com média de 13,4%/h. A taxa de passagem da silagem de milho mordentada foi menor, com tendência de menor taxa de passagem também para o farelo de girassol na dieta MI. A casca de soja e o farelo de gérmen de milho podem substituir parcialmente o milho, proporcionando ambiente ruminal adequado ao desenvolvimento da flora microbiana e conseqüente produção de proteína microbiana ruminal em novilhos confinados.

Taxa de passagem e parâmetros ruminais em bovinos suplementados com enzimas fibrolíticas

Avaliou-se o efeito da adição de enzimas fibrolíticas (celulase e xilanase) sobre as taxas de passagem de partículas e de diluição e os parâmetros ruminais (pH e nitrogênio amoniacal) em animais consumindo dietas contendo silagem de milho e feno de tifton 85 (Cynodon spp.) como volumoso. Oito bovinos com fístulas no rúmen e no duodeno foram distribuídos em dois quadrados latinos 4 x 4, com os tratamentos distribuídos em esquema fatorial 2 x 2 (duas fontes de volumoso e adição ou não de enzimas). O complexo enzimático foi proveniente de fonte comercial e extraído dos fungos Aspergillus niger e Trichoderma longibrachiatum, sendo fornecido na proporção de 12 g/animal/dia, misturado à ração total. Para as taxas de passagem, foram utilizados como marcadores das fases sólida e líquida o cromo-mordente e o cobalto-EDTA, respectivamente. Não houve efeito das enzimas sobre o pH e as concentrações de N-NH3, que apresentaram médias de 6,5 e 22,10 mg/100 mL, respectivamente. A taxa de passagem de partículas no rúmen não foi influenciada pela suplementação enzimática, com médias de 3,4 e 3,0%/h para as dietas contendo silagem de milho e feno de tifton, respectivamente. A taxa de diluição aumentou de 10,07 para 11,84%/h com a adição de enzimas. A suplementação com enzimas fibrolíticas em dietas formuladas com silagem de milho e feno de tifton como volumoso praticamente não alterou os parâmetros avaliados.

Micro Welding of Ni-based Alloy Monel 400 Thin Foil by Pulsed Nd:YAG laser

In this study a pulsed Nd:YAG laser was used to join Monel 400 thin foil with 100 mu m thickness. Pulse energy was varied from 1.0 to 2.25J at small increments of 0.25J. The macro and microstructures were analyzed by optical microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the bottom foil dilution rate, it is possible to weld Monel 400 thin foil. The process appeared to be very sensitive to the gap between couples.

Pulsed Nd:YAG laser welding of Ni-alloy Hastelloy C-276 foils

In this study a pulsed Nd:YAG laser was used to join Hastelloy C-276 thin foil with 100 microns thickness. Pulse energy was varied from 1.0 to 2.25 J at small increments of 0.25 J with a 4 ms pulse duration. The macro and microstructures of the welds were analyzed by optical and electronic microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the dilution rate, it is possible to weld Hastelloy C-276 thin foil by pulsed Nd: YAG laser. (C) 2012 Published by Elsevier B. V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH

IN-VITRO INHIBITION OF SPORES GERMINATION OF ALTERNARIA-SOLANI BY 3 FUNGICIDES

In vitro inhibition of the of spores germination of Alternaria solani by iprodione, chlorothalonil, and anilazine at different dosages was studied. The highest concentration of active ingredient studied for each fungicide was equivalent to that recommended for the control of the early blight, under field conditions: 0.75; 1.80 and 1.44 g, respectively, of iprodione, chlorothalonil and anilazine per litre of water. A series of two-fold diluitions of each original concentration was studied in additional nine experiments. Eah of the three fungicides showed total in vitro spore inhibition at the highest rate, at six hours of incubation. At nine hours, only analazine mantained its full inhibition activity. The inhibition activity of iprodione decreased suddenly after 1/2 dilution, so that at the 1/8 dilution a total loss of inhibitory activity was observed. Chlorothalonil showed a progressive and slighter decrease of its activity as the dilution rate increased.Analizine showed a high inhibitory activity at higher dilutions, without any loss up to 1/128 dilution. Even at 1/512 dilution, its activity was so high that only 20% of spore germination was observed at six or nine hours of incubation.

Influência da atmosfera protetora no cordão de solda obtido através dos processos de soldagem GMAW e FCAW

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da taxa de passagem de cabras em gestação

Pós-graduação em Zootecnia - FCAV

Fermentação, cinética e degradação ruminal em ovinos alimentados com fontes de carboidratos associadas ao óleo

The objective this work was to evaluate the degradation, fermentation and kinetics of passage rumen fluid en sheep fed diets containing different carbohydrate associated with the oil. Four rumen cannulated sheep were allotted in 4 x 4 latin square. The treatments consisted of diets with high neutral detergent soluble fiber and diets with high starch associated or not with 4,2% of oil. Incubation times were 3, 6, 12, 24, 48, 72, 96 and 120 hours and ruminal fluid was collected at 0, 2, 4, 6, 8, 10, 12, and 24 hours after feeding. Diets high neutral detergent fiber soluble resulted in greater degradation of dry matter, crude protein, neutral detergent fiber soluble and starch, and higher pH values, butyric acid production, dilution rate and ruminal recycling compared with diets high starch content. The inclusion of 4,2% oil the different carbohydrate sources had no influence on the fermentation kinetics and degradation of the fiber. High content of neutral detergent soluble fiber in the diet favors the ruminal fermentation compared to the high starch content.

Effects of supplementation frequency on the ruminal fermentation and enteric methane production of beef cattle grazing in tropical pastures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)