Comparative validation using quantitative real-time PCR (qPCR) and conventional PCR of bovine semen centrifuged in continuous density gradient

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromatin and morphometry alterations of bovine sperm head after Percoll (TM) density gradient centrifugation

The aim of this work was to assess the morphometry and chromatin integrity of bovine sperm head after a three layers discontinuous Percoll (TM) density gradient centrifugation. Frozen semen doses were obtained from six bulls of different breeds, including three taurine and three Zebu animals. Three ejaculates per bull were evaluated. The semen doses were thawed and two smears were made from each sample before (control) and after the Percoll (TM) centrifugation (Percoll (TM) group). The smears were stained with toluidine blue and grayscale digital images were captured and processed in Scilab environment software. It was observed that chromatin heterogeneity was reduced (P<0.05) and chromatin decondensation was increased (P<0.05) after the Percollm treatment utilized. In addition, it was observed that sperm head length was higher (P<0.05) and the side symmetry was lower (P<0.05) in centrifuged sperm cells. When analyzed separately by subspecies, it was observed that the decrease (P<0.05) in chromatin heterogeneity and the increase (P<0.05) in chromatin decondensation occurred in Zebu sperm heads. In addition, the length and the width:length ratio of sperm heads was affected by Percoll (TM) centrifugation in Zebu semen. In conclusion, the three layers discontinuous Percoll (TM) centrifugation increased the chromatin decondensation and the morphometric alterations of frozen-thawed bovine semen. However, the real implication of these findings in fertility rates of centrifuged sperm must be investigated. (C) 2011 Elsevier B.V. All rights reserved.

GREEN MACHINING ORIENTED TO DIMINISH DENSITY GRADIENT FOR MINIMIZATION of DISTORTION IN ADVANCED CERAMICS

After sintering advanced ceramics, there are invariably distortions, caused in large part by the heterogeneous distribution of density gradients along the compacted piece. To correct distortions, machining is generally used to manufacture pieces within dimensional and geometric tolerances. Hence, narrow material removal limit conditions are applied, which minimize the generation of damage. Another alternative is machining the compacted piece before sintering, called the green ceramic stage, which allows machining without damage to mechanical strength. Since the greatest concentration of density gradients is located in the outer-most layers of the compacted piece, this study investigated the removal of different allowance values by means of green machining. The output variables are distortion after sintering, tool wear, cutting force, and the surface roughness of the green ceramics and the sintered ones. The following results have been noted: less distortion is verified in the sintered piece after 1mm allowance removal; and the higher the tool wear the worse the surface roughness of both green and sintered pieces.

Occurrence of Cryptosporidium (Apicomplexa, Cryptosporidiidae) in Crotalus durissus terrificus (Serpentes, Viperidae) in Brazil

The objective of the present study was to investigate the prevalence of Cryptosporidium (Apicomplexa, Cryptosporidiidae) in the snake Crotalus durissus terrificus (Serpentes, Viperidae). Fifty animals were evaluated for the presence of oocysts of Cryptosporidium sp. at the time of arrival and 30 and 60 days later. Intestinal washings with saline solution (1% body weight), fecal samples, and organ scrapings were collected during the study. Oocysts were concentrated by an ether-phosphate-buffered saline sedimentation technique and then separated by a density gradient centrifugation technique. Smears were made with the sediment and submitted to modified acid-fast and auramine-rhodamine staining. Cryptosporidium-positive smears were used as controls for the experimental findings. The overall prevalence of Cryptosporidium sp. oocysts was 14%. Among the positive snakes, oocysts were detected only in the intestinal washing in two specimens, only in the feces in four specimens, and in both materials at least once in one specimen. The positive snakes were predominantly from Santa Maria da Serra city State of São Paulo (57.1%). We also observed that all of the examinations that presented positive results were obtained at least 27 days after the capture of the animals.

Sexagem de espermatozoides bovinos por centrifugação em gradiente descontínuo de densidade de Percoll

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simulation and economic analysis of bovine sex selection

A simulation model implemented in the programming software Delphi XE® was applied to evaluate sex selection in bovine. The hypothesis under investigation was that a dynamic model with stochastic and deterministic elements could detect the sexed semen technique to minimize pregnancy cost and to determine the adequate number of recipients required for in vivo (ET) and in vitro embryo production (IVP) in the proposed scenarios. Sex selection was compared through semen sexed using flow cytometry (C1) and density gradient centrifugation techniques (C2) in ET and IVP. Sensibility analyses were used to identify the adequate number of recipients for each scenario. This number was reinserted into the model to determine the biological and financial values that maximized ET and IVP using sexed semen (C1M and C2M). New scenarios showed that the density gradient technique minimized pregnancy cost based on the proposed scenarios. In addition, the adequate number of recipients (ET - C1M - 115 and C2M - 105)/(IVP - C1M - 145 and C2M - 140) per donor used was determined to minimize the pregnancy cost in all scenarios.

The N terminus of the human alpha(1D)-adrenergic receptor prevents cell surface expression

We previously reported that truncation of the N-terminal 79 amino acids of alpha(1D)-adrenoceptors (Delta(1-79)alpha(1D)-ARs) greatly increases binding site density. In this study, we determined whether this effect was associated with changes in alpha(1D)-AR subcellular localization. Confocal imaging of green fluorescent protein (GFP)-tagged receptors and sucrose density gradient fractionation suggested that full-length alpha(1D)-ARs were found primarily in intracellular compartments, whereas Delta(1-79)alpha(1D)-ARs were translocated to the plasma membrane. This resulted in a 3- to 4-fold increase in intrinsic activity for stimulation of inositol phosphate formation by norepinephrine. We determined whether this effect was transplantable by creating N-terminal chimeras of alpha(1)-ARs containing the body of one subtype and the N terminus of another (alpha(1A) NT-D, alpha(1B) NT-D, alpha(1D) NT-A, and alpha(1D)NT-B). When expressed in human embryonic kidney 293 cells, radioligand binding revealed that binding densities of alpha(1A)- or alpha(1B)-ARs containing the alpha(1D)-N terminus decreased by 86 to 93%, whereas substitution of alpha(1A)- or alpha(1B)-N termini increased alpha(1D)-AR binding site density by 2- to 3-fold. Confocal microscopy showed that GFP-tagged alpha(1D)NT-B-ARs were found only on the cell surface, whereas GFP-tagged alpha(1B)NT-D-ARs were completely intracellular. Radioligand binding and confocal imaging of GFP-tagged alpha(1D)- and Delta(1-79)alpha(1D)-ARs expressed in rat aortic smooth muscle cells produced similar results, suggesting these effects are generalizable to cell types that endogenously express alpha(1D)-ARs. These findings demonstrate that the N-terminal region of alpha(1D)-ARs contain a transplantable signal that is critical for regulating formation of functional bindings, through regulating cellular localization.

Lipoperoxidação, perda de viabilidade celular e diminuição da liberação de IL-8 de neutrófilos humanos na presença de corpos cetônicos

Type-1 diabetes patients suffer from frequent episodes of acidosis caused by an increased fatty acid metabolism and consequently increased plasma level of acetoacetate (AcAc) and β-hydroxybutyrate (β-HOB). This article describes a study of the effects of pathological concentrations of AcAc and β-HOB on lipoperoxidation, cell viability and the release of the CXCL8 (IL-8) cytokine by activated neutrophils. Neutrophils from healthy donors were isolated by density gradient (Histopaque® 1077/1119) and incubated with the ketone bodies. Lipoperoxidation was determined as thiobarbituric acid reactive substances (TBARS). The cell viability was evaluated by the release of intracellular lactate dehydrogenase. The release of CXCL8 was measured by ELISA in a 24-h culture of opsonized zymosan-stimulated neutrophils. AcAc, but not β-HOB, provoked a dose-dependent increase in the neutrophil membrane lipoperoxidation (p<0.05; r =0.9915). In the cytotoxicity assay, a dose-dependent release of LDH was observed when the neutrophils were incubated with AcAc in concentrations up to 40 mM (p<0.05). β-HOB was devoid of effect. The release of CXCL8 was inhibited by AcAc and β-HOB in a dose-dependent manner. In conclusion, these results suggest that the accumulation of ketone bodies in diabetic patients could be involved in their usually increased susceptibility to infection.

Embryos refrozen-thawed by vitrification lead to live births: Case report

Objective: To describe two successful cases of utilizing refrozen blastocysts by vitrification derived from supernumerary embryos. Design: Case report. Setting: Private fertility clinic. Subjects: Two infertility couple. Interventions: Refrozen blastocysts by vitrification derived from supernumerary embryos. Main outcome measures: Obstetric and pediatric results. Results: Two pregnancies obtained from refrozen-warmed blastocysts led to two healthy babies being born without clinical or genetic problems. Conclusion: These case reports support the notion of safely repeating cryopreservation. However, despite these favorable results, there is still a need for prospective controlled studies on the obstetric and neonatal repercussions of refreezing and of vitrification in particular. © 2010 Middle East Fertility Society.

Effect of green machining on distortion and surface finishing in advanced ceramic

An alternative for grinding of sintered ceramic is the machining on the green state of the ceramic, which presents easy cutting without the introduction of harmful defects to its mechanical resistance. However, after sintering there are invariably distortions caused by the heterogeneous distribution of density gradients, which are located in the most outlying portions of the compacted workpiece. In order to minimize these density gradients, this study examined the influence of different allowance values and their corresponding influence in distortion after sintering alumina specimens with 99.8 % purity by turning operation using cemented carbide tool. Besides distortion, other output variables were analyzed, such as tool wear, cutting force and surface roughness of green and sintered ceramics. Results showed a distortion reduction up to 81.4%. Green machining is beneficial for reducing surface roughness in both green and sintered states. Cutting tool wear has a direct influence on surface roughness and cutting force.

O modelo 'hydrotime' pode descrever a resposta de sementes de feijão comum (phaseolus vulgaris l.) à temperatura e potenciais de água reduzidos

Germination parameters of the response to temperature and water potential from four common bean (Phaseolus vulgaris) lines based on thermal-time and hydrotime concepts were estimated to verify to what extent they can predict germination under different thermal and water conditions. The cultivars IPR Uirapuru and IAPAR 81 (drought-tolerant), and Grauna and Carioca (not tolerant) were used. The isothermal assays were performed in a temperature gradient block, and the assays with different osmotic potentials (PEG 6000) were performed in germination chambers. Seeds from drought-tolerant cultivars spent less time to germinate at supra-optimum temperatures than non-tolerant ones, and the cultivar Uirapuru (drought-tolerant) germinated faster in response to reduced Ψ and low temperatures. The parameter Ψb(50) did not discriminate between drought-tolerant and non-tolerant lines at the infraoptimum temperature range, but it can be used to identify drought-tolerant lines at high temperatures. In general, the hydrotime model reproduced the actual germination data relatively well, chiefly at higher temperatures. This study evidenced that the hydrotime model can be used to describe the germination of common bean seeds under reduced water potentials, and as a screening tool for drought-tolerant bean genotypes.

Avaliação de novas propostas em arcabouços tridimencionais (3D) para cultura de células-tronco mesenquinas e condogênese

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)