The use of scaled semivariograms to plan soil sampling in sugarcane fields

Spatial sampling designs used to characterize the spatial variability of soil attributes are crucial for science studies. Sample planning for the interpolation of a regionalized variable may use several criteria, which could be best selected from an estimated semivariogram from a previously established grid. The objective of this study was to optimize the procedure for scaled semivariogram use to plan soil sampling in sugarcane fields in the Alfisol and Oxisol regions of Jaboticabal Town in So Paulo State, Brazil. A scaled semivariogram for several soil chemical attributes was estimated from the data obtained from two grids positioned on a sugarcane field area, sampled at a depth of 0.0-0.5 m. The research showed that regular grids with uniform intervals did not express the real spatial variability of the soil attributes of Oxisols and Alfisols in the study area. The calculated final sampling density based on the scaled parameters of the semivariogram was one sample for each 2 ha in Area 1 (convex landscape) and one sample for each 1 ha in Area 2 (linear landscape), as indicated by SANOS 0.1 software. The combined use of the simulation programs and scaled semivariograms can be used to define sampling points. These results may help in soil fertility mapping and thereby improve nutrient management in sugarcane crops.

Study of physical-chemical stability in contaminated conditioners by bacteria

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determining the interfacial density of states in metal-insulator-semiconductor devices based on poly(3-hexylthiophene)

Low frequency admittance measurements are used to determine the density of interface states in metal-insulator-semiconductor diodes based on the unintentionally doped, p-type semiconductor poly(3-hexylthiophene). After vacuum annealing at 90 degrees C, interface hole trapping states are shown to be distributed in energy with their density decreasing approximately linearly from similar to 20x10(10) to 5x10(10) cm(-2) eV(-1) over an energy range extending from 0.05 to 0.25 eV above the bulk Fermi level. (c) 2008 American Institute of Physics.

The Predation of Artemia Nauplii by the Larvae of the Amazon River Prawn, Macrobrachium amazonicum (Heller, 1862), is Affected by Prey Density, Time of Day, and Ontogenetic Development

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of dietary energy and stocking density on the performance and sensible heat loss of broilers reared under tropical winter conditions

The objective of the present study was to evaluate the effects of different dietary energy levels and stocking densities on the thermoregulating parameters, live performance, and carcass traits of broilers reared under tropical winter conditions at different times of the day. In total, 1,312 one-d-old male broilers were used. Birds were allotted to three different stocking densities (10, 14 or 18 birds/m²) and two dietary energy levels (2900 or 3200 kcal ME/kg). The following parameters were evaluated:radiant heat load (RHL), rectal temperature (RT), feed intake (FI), weight gain (WG), feed conversion ratio (FCR), livability (L), production of live weight per area (WA), and carcass yield. Stocking density did not affect sensible heat loss (SRL) or rectal temperature (RT); however, as expected, sensible heat loss (SRL) and RT were influenced by time of the day, with higher values in the morning and in the afternoon, respectively. There was no effect of treatment (p>0.05) on carcass or parts yield. Feed intake was reduced in 3%, whereas weight gain and feed conversion ratio improved in 8 and 10%, respectively, as dietary energy level increased. on the other hand, stocking density did not influence live performance or carcass traits. Based on the present results, it is concluded that sensible heat loss depends on dietary energy levels and particularly on time of the day. Therefore, environmental house management is suggested during tropical winters in order to reduce differences between broiler skin and environmental temperatures in the morning and in the afternoon.

Structural and optical properties of CaTiO3 perovskite-based materials obtained by microwave-assisted hydrothermal synthesis: An experimental and theoretical insight

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Beneficial effects of diclofenac therapy on serum lipids, oxidized low-density lipoprotein and antioxidant defenses in rats

To study the effects of diclofenac, a nonselective nonsteroidal anti-inflammatory drug (NSAID), on lipid profile, oxidized low-density-lipoprotein (Ox-LDL), serum antioxidant defenses and markers of oxidative stress, male Wistar rats were divided into two groups (n = 10): (C) receiving intramuscularly a single daily dose of saline (NaCl 0.9%), and (AI) receiving intramuscularly a single daily dose of 10 mg/kg diclofenac sodium (C14H10C12NNaO2). After 28 days diclofenac-treated rats had lower Ox-LDL, apoprotein B (apo-B), apo-B/LDL-cholesterol and lipid hydroperoxide than C. Total antioxidant substances and superoxide dismutase were increased in diclofenac-treated rats, while no significant changes were observed in catalase, glutathione peroxidase and nitric oxide. A perincubation test done to examine the possibility of mechanism-based activation showed that diclofenac had no effect on maximal superoxide dismutase velocity, but significantly reduced the Michaelis-Menten (K-M) constant, indicating that diclofenac induced SOD activation increasing substrate linkage affinity to the enzyme-catalytic site. In conclusion, diclofenac had beneficial effects decreasing Ox-LDL and improving antioxidant defense. It appears that the application of this agent may be feasible and beneficial for serum antioxidant protection, which certainly would bring new insights on dyslipidemia control. (C) 2008 Elsevier B.V. All rights reserved.

The impact of different types of physical activity on total and regional bone mineral density in young Brazilian athletes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of castor oil-based polyurethane membranes in rat bone-marrow cell culture

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of temperament and acclimation to handling on feedlot performance of Bos taurus feeder cattle originated from a rangeland-based cow-calf system

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Homeopathic Symphytum officinale increases removal torque and radiographic bone density around titanium implants in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

How to not inflate population estimates? Spatial density distribution of white-lipped peccaries in a continuous Atlantic forest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexural Strength of Glass-Infiltrated Zirconia/Alumina-Based Ceramics and Feldspathic Veneering Porcelains

Purpose: To compare the flexural strength of two glass-infiltrated high-strength ceramics and two veneering glass-ceramics.Materials and Methods: Four ceramic materials were tested: two glass-infiltrated high-strength ceramics used as framework in metal-free restorations [In-Ceram Zirconia IZ (Gr1) and In-Ceram Alumina IA (Gr2)], and two glass-ceramics used as veneering material in metal-free restorations [Vita VM7 (Gr3) and Vitadur-alpha (Gr4)]. Bar specimens (25 x 5 x 2 mm(3)) made from core ceramics, alumina, and zirconia/alumina composites were prepared and applied to a silicone mold, which rested on a base from a gypsum die material. The IZ and IA specimens were partially sintered in an In-Ceram furnace according to the firing cycle of each material, and then were infiltrated with a low-viscosity glass to yield bar specimens of high density and strength. The Vita VM7 and Vitadur-alpha specimens were made from veneering materials, by vibration of slurry porcelain powder and condensation into a two-part brass Teflon matrix (25 x 5 x 2 mm(3)). Excess water was removed with absorbent paper. The veneering ceramic specimens were then removed from the matrix and were fired as recommended by the manufacturer. Another ceramic application and sintering were performed to compensate the contraction of the feldspar ceramic. The bar specimens were then tested in a three-point bending test.Results: The core materials (Gr1: 436.1 +/- 54.8; Gr2: 419.4 +/- 83.8) presented significantly higher flexural strength (MPa) than the veneer ceramics (Gr3: 63.5 +/- 9.9; Gr4: 57.8 +/- 12.7).Conclusion: In-Ceram Alumina and Zirconia were similar statistically and more resistant than VM7 and Vitadur-alpha.

Automatic estimation of crowd density using texture

This paper considers the role of automatic estimation of crowd density and its importance for the automatic monitoring of areas where crowds are expected to be present. A new technique is proposed which is able to estimate densities ranging from very low to very high concentration of people, which is a difficult problem because in a crowd only parts of people's body appear. The new technique is based on the differences of texture patterns of the images of crowds. Images of low density crowds tend to present coarse textures, while images of dense crowds tend to present fine textures. The image pixels are classified in different texture classes and statistics of such classes are used to estimate the number of people. The texture classification and the estimation of people density are carried out by means of self organising neural networks. Results obtained respectively to the estimation of the number of people in a specific area of Liverpool Street Railway Station in London (UK) are presented. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

Doping saturation in dye-sensitized solar cells based on ZnO:Ga nanostructured photoanodes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)