Efeito de período de controle de plantas daninhas na cultura de amendoim

Dois experimentos foram conduzidos com o objetivo de avaliar os efeitos de diferentes períodos de controle das plantas daninhas, sobre algumas características produtivas da cultura do amendoim. Os experimentos foram instalados no município de Taquaritinga-SP, em duas épocas de semeadura, sendo uma no cultivo das secas, semeada durante o mês de março, e outra no cultivo das águas, semeada durante o mês de setembro. Os tratamentos foram períodos de controle das plantas daninhas entre 017, 0-31, 0-45, 0-59, 0-73, 17-31, 17-45, 17-59, 17-73, 31-45, 31-59, 31-73, 45-59, 45-73 e 59-73 dias após a emergência da cultura. Foram mantidas duas testemunhas, uma sem controle e outra com controle das plantas daninhas durante todo o ciclo da cultura. A principal planta daninha, nos dois experimentos, foi Digitaria horizontalis. A comunidade infestante e a cultura foram influenciadas pela época de semeadura, modificando suas relações de interferência. No cultivo da época das águas, os efeitos da convivência da comunidade infestante foram mais drásticos, afetando com maior intensidade a produtividade da cultura. Dentre as características produtivas avaliadas, o número de vagens por planta foi o principal fator na redução da produtividade. No cultivo das águas, o controle somente foi necessário após os 45 dias iniciais de convivência, e na cultura das secas, após os 59 dias, caracterizando os períodos anteriores à interferência. Nas duas épocas de semeadura o controle das plantas daninhas, realizado até 17 dias após a emergência, foi suficiente para garantir a produtividade da cultura semelhante à testemunha capina, caracterizando o período total de prevenção à interferência.

Cloreto de potássio revestido em efeito residual no feijoeiro de inverno irrigado na região de cerrado

In order to maintain the nutrients available to plants have been studied controlled release fertilizers. In this context, the objective was to evaluate the residual effect of doses of potassium chloride, coated or not, applied in the corn crop, regarding the crop components and grains yield of irrigated winter common bean, cultivated in followed, in Cerrado region. The experiment was conducted in Selvíria - MS, Brazil, 51°22- west longitude and 20°22- south latitude, in a clayey Oxisol, in 2009 and 2010. A randomized block design with four repetitions was used, disposed in a factorial scheme 4 x 2, being: four K2O doses (0, 40, 80 and 120 kg ha-1) and two potassium sources (potassium chloride and coated potassium chloride by polymers) applied at sowing in the corn crop. The coated potassium chloride by polymers have the same residual effect as conventional KCl, because it provides results similar for the K and chlorophyll leaf contents, crop components and grains yield of winter common bean irrigated. The increment of potassium doses in the previous crop (corn) have residual effect, because it influenced positively the number of grains per plant in 2009 and increased linearly the chlorophyll leaf content and the grains yield of winter common bean irrigated in 2010, regardless of the source used for K.

Adubação com KCl revestido na cultura do milho no Cerrado

The use of coated potassium chloride can provide greater absorption of potassium resulting in the alteration of leaf contents, production components and grain yield. The objective of this study was to evaluate the effect of potassium doses using potassium chloride conventional or coated by polymer, in the corn crop under conditions of brazilian Savanna with low altitude. The experiment was conducted in Selviria, MS, Brazil, in a clayey Oxisol. The treatments consisted of four doses of K2O (0, 40, 80 and 120 kg ha(-1)), applied at sowing, and two sources: potassium chloride and potassium chloride coated by polymers. A randomized block design with eight treatments and four replications was used. The coated KCl is not efficient under the soil and climatic conditions studied, because it provided results similar to the conventional KCl for the K foliar content, crop components and grain yield of irrigated corn. The increment of K2O doses influenced positively the K and chlorophyll leaf contents, plant and spike insertion height and the number of rows and grains per spike. The maximum mean yield obtained was with 83.5 kg ha(-1) of K2O.

Validation of the Deardorff model for estimating energy balance components for a sugarcane crop

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Upland rice yield as affected by previous summer crop rotation (soybean or upland rice) and glyphosate management on cover crops

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Popcorn (Zea mays L. var. everta) yield and yield components as influenced by the timing of broadcast flaming

Farmers are interested in producing popcorn under organic production systems and propane flaming could be a significant component of an integrated weed management program. The objective of this study was to collect baseline information on popcorn tolerance to broadcast flaming as influenced by propane dose and crop growth stage at the time of flaming. Field experiments were conducted at the Haskell Agricultural Laboratory of the University of Nebraska, Concord, NE in 2008 and 2009 using five propane doses (0, 13, 24, 44 and 85 kg ha(-1)) applied at the 2-leaf, 5-leaf and 7-leaf growth stages. Propane was applied using a custom-built research flamer driven at a constant speed of 6.4 km h(-1). Crop response to propane dose was described by log-logistic models on the basis of visual estimates of crop injury, yield components (plants m(-2), ears plant(-1), kernels cob(-1) and 100-kernel weight) and grain yield. Popcorn response to flaming was influenced by the crop growth stage and propane dose. Based on various parameters evaluated, popcorn flamed at the 5-leaf showed the highest tolerance while the 2-leaf was the most susceptible stage. The maximum yield reductions were 45%, 9% and 16% for the 2-leaf, 5-leaf and 7-leaf stages, respectively. In addition, propane doses that resulted in a 5% yield loss were 23 kg ha(-1) for the 2-leaf and 7-leaf and 30 kg ha(-1) for the 5-leaf stage. Flaming has a potential to be used effectively in organic popcorn production if properly used. (C) 2010 Elsevier Ltd. All rights reserved.

Potential of Brazilian eugenia myrtaceae - As ornamental and as a fruit crop

Brazilian Myrtaceae comprises several genera of trees and shrubs used for ornamental and fruit production. In addition to the well known Guava, Pitanga and Jaboticaba, other species could be used for fruitculture, due the value and quality of their fruits and adaptation to some climate conditions mainly the subtropical one. Nine species of Eugenia were evaluated at Jaboticabal, located at 48° W and 21° S in São Paulo state in a germplasm bank. The average rain by year is 1431 mm and the temperature 22,2° C at an altitude of 575 m. The species are Eugenia klozschiana Berg. (Pero-do-campo), E. stipitata Mc Vaugh (Araça-boi), E. tomentosa Camb. (Cabeludinha), E. dysentherica DC. (Cagaita), E. brasiliensis Berg. (Grumixama), E.pitanga (Pitanga-anã), E. luchsnathiana Berg. (Pitomba), E. uvalha Camb. (Uvaia) and E. involucrata DC. (Cereja-do-rio-grande). The evaluations comprised tree development, fruit quality and leaf and flower morphological studies. The main results are: the trees of Pera-do-campo and Pitanga-anã are small shrubs of 1 to 2 m height, Araça-boi and Cabeludinha are small trees, 3 to 5 m high, and the other species are tall trees, with 5 to 10 m height. The species adapted well to the subtropical conditions, except for Araça-boi, which is native to the Amazonian region and exhibited a severe fungus disease infection. In relation to fruit quality, all the species had edible fruit, some were sweet and juicy, Cabeludinha, Grumixama, Pitomba, Cereja-do-rio grande and Pitanga-anã, while others had high acidity (Araça-boi, Pera-do-campo, Cagaita and Uvaia and were more suitable for processing. Simple, single leaves were characteristic of all species, but with different sizes and shapes., With the addition of color, smell and other characteristics, leaf size and shape were useful for comparative classification. Flower components and structure are described also.

Effects of superficial liming and silicate application on soil fertility and crop yield under rotation

Soil acidity and low natural fertility are the main problems for grain production in Brazilian 'cerrado'. Although lime has been the most applied source for soil correction, silicate may be an alternative material due to its lower solubility and Si supply, which is beneficial to several crops. This work aimed to evaluate the efficiency of superficial liming and calcium/magnesium silicate application on soil chemical attributes, plant nutrition, yield components and final yield of a soybean/white oat/maize/bean rotation under no-tillage system in a dry-winter region. The experiment was conducted under no tillage system in a deep acid clayey Rhodic Hapludox, Botucatu-SP, Brazil. The design was the completely randomized block with sixteen replications. Treatments consisted of two sources for soil acidity correction (dolomitic lime: ECC=90%, CaO=36% and MgO=12%; calcium/magnesium silicate: ECC=80%, CaO=34%, MgO=10% and SiO2=22%) applied in October 2006 to raise base saturation up to 70% and a control, with no soil correction. Soybean and white oat were sown in 2006/2007 as the main crop and off-season, respectively. Maize and bean were cropped in the next year (2007/2008). Products from silicate dissociation reach deeper soil layers after 18months from the application, compared to liming. Additionally, silicate is more efficient than lime to increasing phosphorus availability and reducing toxic aluminum. Such benefits in soil chemical attributes were only evidenced during bean cropping, when grain yield was higher after silicate application comparatively to liming. Both correction sources were improved mineral nutrition of all the other crops, mainly Ca and Mg levels and agronomical characteristics, reflecting in higher yield. © 2012 Elsevier B.V.

ASIAN SOYBEAN RUST INTEGRATED MANAGEMENT POTENTIAL: DISEASE SEVERITY, PLANT DEVELOPMENT AND YIELD COMPONENTS, CULTIVAR MG/BR-46 (CONQUISTA)

Soybean rust caused by Phakopsora pachyrhizi Sydow & P. Sydow is one of the major diseases of the soybean crop. The aim of this study was to evaluate the effects of sowing dates, plant populations and reduced doses of fungicides on soybean rust severity and its effects on plant development and yield, cultivar MG/BR46 (Conquista). Field experiments were conducted in the 2009/2010 and 2010/2011 harvests, under natural rust infestation of soybean rust. As from the appearance of the first disease symptoms, also began the fungicide spraying and the disease severity assessments. To understand the nature and extent of the effects of different treatments, a multivariate analysis of factors was applied. For the majority of the agronomic characters and factors, one-third to two-thirds of their variability can be explained by changes in plant populations or by differences in the fungicide treatments, and the remainder, was explained by sowing date variations. The fungicide treatments and sowing dates are determinants in disease severity and its interference on crop productivity. The characters of plant growth are more dependent on plant population variations. Treatments with azoxystrobina + ciproconazol promoted smaller disease severities, reflecting in productivity increase. The plant populations can be reduced up to 160.000 plants ha(-1) without losses in the disease control and the soybean yield. In general, the earliest sowings provided increase in the plant development, although the rust control was less efficient.