Viés egotímico: percepções de discentes do curso de pedagogia de uma universidade pública estadual de Mato Grosso e professores egressos em exercício

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A “didática” nas peças didáticas de Bertolt Brecht: ensino em cena

Pós-graduação em Educação Escolar - FCLAR

Ingredient classification according to the digestible amino acid profile: an exploratory analysis

This study aimed: 1) to classify ingredients according to the digestible amino acid (AA) profile; 2) to determine ingredients with AA profile closer to the ideal for broiler chickens; and 3) to compare digestible AA profiles from simulated diets with the ideal protein profile. The digestible AA levels of 30 ingredients were compiled from the literature and presented as percentages of lysine according to the ideal protein concept. Cluster and principal component analyses (exploratory analyses) were used to compose and describe groups of ingredients according to AA profiles. Four ingredient groups were identified by cluster analysis, and the classification of the ingredients within each of these groups was obtained from a principal component analysis, showing 11 classes of ingredients with similar digestible AA profiles. The ingredients with AA profiles closer to the ideal protein were meat and bone meal 45, fish meal 60 and wheat germ meal, all of them constituting Class 1; the ingredients from the other classes gradually diverged from the ideal protein. Soybean meal, which is the main protein source for poultry, showed good AA balance since it was included in Class 3. on the contrary, corn, which is the main energy source in poultry diets, was classified in Class 8. Dietary AA profiles were improved when corn and/or soybean meal were partially or totally replaced in the simulations by ingredients with better AA balance.

Discrimination of geomorphic surfaces with multivariate analysis of soil attributes in sandstone - basalt lithosequence

O conceito de superfície geomórfica permite uma interligação entre os diferentes ramos da ciência do solo, tais como geologia, geomorfologia e pedologia. Esta associação favorece a compreensão da distribuição espacial dos solos na paisagem, e torna possível compreender o comportamento dos atributos do solo, que estão principalmente relacionadas com a estratigrafia e formas do relevo. Assim, este estudo visa à aplicação da estatística multivariada para categorizar superfícies geomórficas em uma litossequência arenito-basalto, de modo a fornecer uma base para a avaliação do solo em áreas afins. A área de estudo está localizada no município de Pereira Barreto, São Paulo, Brasil. A área escolhida possui 530 hectares, onde foram localizadas e mapeadas três superfícies geomórficas (I, II e III). Na área, 134 amostras foram coletadas nas profundidades de 0,0-0,2 m e 0,8-1,0 m, foram determinados os conteúdos de areia, silte e argila, pH em CaCl2, conteúdo de MO, P, Ca, Mg, K, Al e H+Al. Com base nos resultados, foram realizadas a análise univariada e multivariada de variância, clusters e principal componente, a fim de comparar as três superfícies geomórficas. A análise estatística univariada dos atributos do solo não foi eficiente na identificação das três superfícies geomórficas. Utilizando-se os atributos físicos e químicos do solo, as técnicas estatísticas multivariada permitiram à separação dos três grupos de corpos naturais do solo que foram equivalentes as três superfícies geomórficas mapeadas. Estes resultados são interessantes, pois demonstram a viabilidade da utilização de classificação numérica das superfícies geomórficas para ajudar no mapeamento de solo.

Brazilian Students and Working Capital: An Analysis of Their Decisions When Using Virtual Market Business Games

This study aims to demonstrate that data from business games can be an important resource for improving efficiency and effectiveness of learning. The proposal presented here was developed from preliminary studies of data from Virtual Market games that pointed the possibility of identifying gaps in learning by analyzing the decisions of students. This proposal helps students to refine their learning processes and equips tutors with strategies for teaching and student assessment. The proposal also complements the group discussion and/or debriefing, which are widely used to enhance learning mediated by games. However, from a management perspective the model has the potential to be erroneous and miss opportunities, which cannot be detected because of the dependence on the characteristics of the individual, such as ability to communicate and work together. To illustrate the proposed technique, data sets from two business games were analyzed with the focus on managing working capital and it was found that students had difficulties managing this task. Similar trends were observed in all categories of students in the study-undergraduate, postgraduate and specialization. This discovery led us to the analysis of data for decisions made in the performance of the games, and it was determined that indicators could be developed that were capable of indentifying inconsistencies in the decisions. It was decided to apply some basic concepts of the finance management, such as management of the operational and non-operational expenditures, as well as production management concepts, such as the use of the production capacity. By analyzing the data from the Virtual Market games using the indicator concept, it was possible to detect the lack of domain knowledge of the students. Therefore, these indicators can be used to analyze the decisions of the players and guide them during the game, increasing their effectiveness and efficiency. As these indicators were developed from specific content, they can also be used to develop teaching materials to support learning. Viewed in this light, the proposal adds new possibilities for using business games in learning. In addition to the intrinsic learning that is achieved through playing the games, they also assist in driving the learning process. This study considers the applications and the methodology used.

Framework for analysis and representation of external systems for online reactive-optimisation studies

The paper proposes a framework for the analysis and representation of external systems for online optimisation studies. The basis for this framework is the equivalent OPF (EOPF), an optimisation model obtained by partitioning of the OPF model. The EOPF is mathematically redefined in the paper to accommodate the concept of a buffer zone. The resulting model is more useful for online optimisation, since external information obtained through intercontrol-centre exchange contracts can be used to improve internal control calculation. Numerical results obtained with original studies involving the boundary-matching procedure have provided a conceptual basis for the definition of a buffer zone for optimisation studies with the EOPF. In the proposed framework, the accuracy of the external representation in optimisation studies is evaluated by comparing the controls obtained by an EOPF procedure with those obtained by the reference-optimisation procedure defined in this paper. The framework is then used to evaluate the accuracy of equivalent optimisation studies involving the IEEE 118-bus test system and the Brazilian South Southeast 810-bus system. The results show that the incorporation of a buffer zone improves the external system representation for all optimisation studies performed.

Analysis of surface integrity for minimum quantity lubricant - MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL. (c) 2006 Elsevier Ltd. All rights reserved.

A critical analysis of isolation of Paracoccidioides brasiliensis from soil

The present review is a critical analysis of positive and negative reports of the isolation of Paracoccidioides brasiliensis from soil. The strains isolated from soil or soil-contaminated material (dogfood, penguin feces) by Batista et al. in Recife, Brazil, Negroni in the Argentinian Chaco, Albornoz in rural Venezuela, Silva-Vergara et al, in Ibia, Brazil, Ferreira et al, in Uberlandia, Brazil, and Gezuele et al. at the Uruguayan base in the Antarctic region, presented mycological characteristics consistent with P. brasiliensis. In most of these studies, morphological characterization was complemented with an evaluation of virulence and antigenicity, and biochemical or molecular analysis. These isolations, therefore, can be considered true, supporting the concept of soil as an important element in the ecology of the pathogen. The large number of negative reports in attempts involving soil samples and the low repeatability of isolation of the fungus from the same area indicate that the specific conditions supporting growth of the pathogen in soil have not been fully clarified.

Independent clonal origin of multiple uterine leiomyomas that was determined by X chromosome inactivation and microsatellite analysis

Objective: In an attempt to clarify the clonality and genetic relationships that are involved in the tumorigenesis of uterine leiomyomas, we used a total of 43 multiple leiomyomas from 14 patients and analyzed the allelic status with 15 microsatellite markers and X chromosome inactivation analysis.Study design: We have used a set of 15 microsatellite polymorphism markers mapped on 3q, 7p, 11, and 15q by automated analysis. The X chromosome inactivation was evaluated by the methylation status of the X-linked androgen receptor gene.Results: Loss of heterozygosity analysis showed a different pattern in 7 of the 8 cases with allelic loss for at least 1 of 15 microsatellite markers that were analyzed. A similar loss of heterozygosity findings at 7p22-15 was detected in 3 samples from the same patient. X chromosome inactivation analysis demonstrated the same inactivated allele in all tumors of the 9 of 12 informative patients;. different inactivation patterns were observed in 3 cases.Conclusion: Our data support the concept that uterine leiomyomas are derived from a single cell but are generated independently in the uterus. Loss of heterozygosity findings at 7p22-15 are consistent with previous data that suggested the relevance of chromosomal aberrations at 7p that were involved in individual uterine leiomyomas. (C) 2005 Mosby, Inc. All rights reserved.

Platform Switching: Biomechanical Evaluation Using Three-Dimensional Finite Element Analysis

Purpose: The objective of this study was to evaluate, using three-dimensional finite element analysis (3D FEA), the stress distribution in peri-implant bone tissue, implants, and prosthetic components of implant-supported single crowns with the use of the platform-switching concept. Materials and Methods: Three 3D finite element models were created to replicate an external-hexagonal implant system with peri-implant bone tissue in which three different implant-abutment configurations were represented. In the regular platform (RP) group, a regular 4.1-mm-diameter abutment (UCLA) was connected to regular 4.1-mm-diameter implant. The platform-switching (PS) group was simulated by the connection of a wide implant (5.0 mm diameter) to a regular 4.1-mm-diameter UCLA abutment. In the wide-platform (WP) group, a 5.0-mm-diameter UCLA abutment was connected to a 5.0-mm-diameter implant. An occlusal load of 100 N was applied either axially or obliquely on the models using ANSYS software. Results: Both the increase in implant diameter and the use of platform switching played roles in stress reduction. The PS group presented lower stress values than the RP and WP groups for bone and implant. In the peri-implant area, cortical bone exhibited a higher stress concentration than the trabecular bone in all models and both loading situations. Under oblique loading, higher intensity and greater distribution of stress were observed than under axial loading. Platform switching reduced von Mises (17.5% and 9.3% for axial and oblique loads, respectively), minimum (compressive) (19.4% for axial load and 21.9% for oblique load), and maximum (tensile) principal stress values (46.6% for axial load and 26.7% for oblique load) in the peri-implant bone tissue. Conclusion: Platform switching led to improved biomechanical stress distribution in peri-implant bone tissue. Oblique loads resulted in higher stress concentrations than axial loads for all models. Wide-diameter implants had a large influence in reducing stress values in the implant system. INT J ORAL MAXILLOFAC IMPLANTS 2011;26:482-491

Implant Platform Switching: Biomechanical Approach Using Two-Dimensional Finite Element Analysis

In implant therapy, a peri-implant bone resorption has been noticed mainly in the first year after prosthesis insertion. This bone remodeling can sometimes jeopardize the outcome of the treatment, especially in areas in which short implants are used and also in aesthetic cases. To avoid this occurrence, the use of platform switching (PS) has been used. This study aimed to evaluate the biomechanical concept of PS with relation to stress distribution using two-dimensional finite element analysis. A regular matching diameter connection of abutment-implant (regular platform group [RPG]) and a PS connection (PS group [PSG]) were simulated by 2 two-dimensional finite element models that reproduced a 2-piece implant system with peri-implant bone tissue. A regular implant (prosthetic platform of 4.1 mm) and a wide implant (prosthetic platform of 5.0 mm) were used to represent the RPG and PSG, respectively, in which a regular prosthetic component of 4.1 mm was connected to represent the crown. A load of 100 N was applied on the models using ANSYS software. The RPG spreads the stress over a wider area in the peri-implant bone tissue (159 MPa) and the implant (1610 MPa), whereas the PSG seems to diminish the stress distribution on bone tissue (34 MPa) and implant (649 MPa). Within the limitation of the study, the PS presented better biomechanical behavior in relation to stress distribution on the implant but especially in the bone tissue (80% less). However, in the crown and retention screw, an increase in stress concentration was observed.

Toward a hierarchical concept of plant stress

A number of attempts have been made to obtain a clear definition of biological stress. However, in spite of the efforts, some controversies on the concept of plant stress remain. The current versions are centered either on the cause (stress factor) or on the effect (stress response) of environmental stress. The objective of this study was to contribute to the definition of stress, using a hierarchical approach. Thus, we have performed an analysis of the most usual stress concepts and tested the relevance of considering different observation scales in a study on plant response to water deficit. Seedlings of Eucalyptus grandis were grown in vitro at water potentials ranging from -0.16 to -0.6 MPa, and evaluated according to growth and biochemical parameters. Data were analyzed through principal component analysis (PCA), which pointed to a hierarchical organization in plant responses to environmental disturbances. Growth parameters (height and dry weight) are more sensitive to water deficit than biochemical ones (sugars, proline, and protein), suggesting that higher hierarchical levels were more sensitive to environmental constraints than lower hierarchical ones. We suggest that before considering an environmental fluctuation as stressful, it is necessary to take into account different levels of plant response, and that the evaluation of the effects of environmental disturbances on an organism depends on the observation scale being used. Hence, a more appropriate stress concept should consider the hierarchical organization of the biological systems, not only for a more adequate theoretical approach, but also for the improvement of practical studies on plants under stress.

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Phytophthora parasitica transcriptome, a new concept in the understanding of the citrus gummosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-linear boundary element analysis of floor slabs reinforced with rectangular beams

In this work, a numerical model to perform non-linear analysis of building floor structures is proposed. The presented model is derived from the Kirchhoff-s plate bending formulation of the boundary element method (BENI) for zoned domains, in which the plate stiffness is modified by the presence of membrane effects. In this model, no approximation of the generalized forces along the interface is required and the compatibility and equilibrium conditions along interfaces are imposed at the integral equation level. In order to reduce the number of degrees of freedom, the Navier Bernoulli hypothesis is assumed to simplify the strain field for the thin sub-regions (rectangular beams). The non-linear formulation is obtained from the linear formulation by incorporating initial internal force fields, which are approximated by using the well-known cell sub-division. Then, the non-linear solution of algebraic equations is obtained by using the concept of the consistent tangent operator. The Von Mises criterion is adopted to govern the elasto-plastic material behaviour checked at points along the plate thickness and along the rectangular beam element axes. The numerical representations are accurately obtained by either computing analytically the element integrals or performing the numerical integration accurately using an appropriate sub-elementation scheme. (C) 2007 Elsevier Ltd. All rights reserved.