Effect of light-curing units on microleakage under dental composite resins

The aim of this study was to determine the effect of two light-curing units (QTH and LED) on microleakage of Class II composite resin restorations with dentin cavosurface margins. Twenty extracted mandibular first premolars, free of caries and fractures were prepared two vertical slot cavities in the occluso-mesial and -destal surfaces (2 mm buccal-lingually, 2 mm proximal-axially and cervical limit in enamel) and divided into 4 equal groups (n = 8): GI and GII: packable posterior composite light-activated with LED and QTH, respectively; GIII and GIV: micro-hybrid composite resin light-activated with LED and QTH, respectively. The composite resins were applied following the manufacturer's instructions. After 24 h of water storage specimens were subjected to thermocycling for a total of 500 cycles at 5 and 55A degrees C and the teeth were then sealed with impermeable material. Teeth were immersed in 0.5% Basic fuchsin during 24 h at room temperature, and zero to three levels of penetration score were attributed. The Mann-Whitney and Kruskal-Wallis tests showed significant statistically similar (P > 0.05) from GI to GII and GIII to GIV, which the GII (2.750) had the highest mean scores and the GIII and GIV (0.875) had lowest mean scores. The use of different light-curing units has no influence on marginal integrity of Class II composite resin restorations and the proprieties of composite resins are important to reduce the microleakage.

Action of dwarf mucuna, pigeon pea and stylos anthes on weed under field and laboratory conditions

The quality and allelopathy properties of dwarf mucuna, dwarf pigeon pea and stylosanthes as cover crops on corn and weed species were evaluated. Seeds were sown in October 2007, with a control treatment, in 20 plots of 4×5m, with five replicates. Weed population was determined 30 and 60 days after sowing. At 90 days, plants were mowed and the residues left to remain on the plot. Fresh and dry mass of the cover crops were determined and the allelopathic potential of aqueous extract of their aerial part was tested. The extract was chemically characterized and applied on seeds of weeds and corn. The experimental design was completely randomized and averages compared by the Scott-Knott test at 5% significance. The cover crops showed to be effective in the control of weeds. The highest values in fresh and dry mass were obtained for dwarf pigeon pea, followed by dwarf mucuna; fresh mass increased 72 and 34%, respectively, compared to the control. The extract with dwarf mucuna affected arrowleaf sida germination. The use of green manure in the summer or between harvests ensures that crop rotation is carried out properly and warrants its benefits.

Influence of filler charge on gloss of composite materials before and after in vitro toothbrushing

Objectives: This study evaluated the gloss behaviour of experimental resin composites loaded with different filler percentages, immediately after polishing and after toothbrushing simulation. Methods: Sixteen disc-shaped specimens were fabricated for each different-charged composite (40%, 50%, 60%, 70% and 75%) and polished with SiC abrasive papers. Gloss measurements were made prior to simulated toothbrushing. The specimens were subjected to the simulation for 5, 15, 30 and 60 min using an electrical toothbrush with a standardized pressure while being immersed in a toothpaste/artificial saliva slurry. Results: Baseline composite gloss values ranged from 69.7 (40%) to 81.3 (75%) GU (gloss units) and from 18.1 (40%) to 32.3 (75%) GU after 1 h of brushing. Highest gloss values were obtained by 75%-charged resin, while the lowest values were obtained by the 40%-charged one. Conclusions: All tested materials showed a gloss decrease. However, the higher filler load a composite resin has, the higher gloss it can achieve. Clinical significance: Gloss of resin composite materials is an important factor in determining aesthetic success of anterior restorations, and this property may vary according to the filler charge of the restorative material. Higher filler load of a composite resin results in higher gloss values. © 2013 Elsevier Ltd. All rights reserved.

SILICON IN ROW AND NITROGEN IN TOPDRESSING FERTILIZATION ON RICE UNDER DRY LAND AND SPRINKLER IRRIGATION CONDITIONS

The objective of this work was to evaluate the effects of silicon application adjusted with nitrogen fertilization via top-dressing on grain productivity, the silicon contents of the soil, in the plant tissue and nitrogen contents in dry and irrigated conditions. The experimental outlining was from designed blocks with subdivided parcels and four repetitions. The treatments consisted of culture system (dry and irrigated) and the under parcels by the combination of silicon (0 and 100 kg ha(-1)), in magnesium and calcium silicate form (with 23% of SiO2), and four doses of N (urea) via top-dressing (0, 30, 60 and 90 kg ha(-1)). Silicon application at sowing furrow was a viable technique because it provided significant increase in the content of this element in the root growth of rice. The application of silicon in the sowing furrow did not change the content of the element nor the nitrogen nutrition in rice plants. The nitrogen application reduced the silicon content and increased nitrogen nutrition in rice plants. Silicon application at sowing furrow provided no increase in rice grain yield. When there was no water limitation to nitrogen fertilization enhanced linearly on rice grain yield, whereas under water stress the effect of nitrogen fertilization was limited.

Effect of pre-imbibition and osmoconditioning on seed-germination in Phaseolus-vulgaris L. under water-stress

The effect of osmoconditioning and controlled water sowing was analysed in seeds of Phaseolus vulgaris L. cv. carioca on germination under water stress conditions. The pre-sowing in water at low temperature to limit germination resulted in the increase in the tolerance to water stress. The osmoconditioning with PEG for 48 hours increased the tolerance of bean seeds to water stress of -0.51MPa. The osmoconditioning or controlled water sowing can be used as a practice to increase the tolerance of bean seeds to water stress before planting in the field.

Effects of Different Periods of Clomazone plus Hexazinona Permanence in Soil and Sugarcane Mulch before the Occurrence of Rain on Weed Control Efficacy

The objective of this work was to evaluate the efficacy of the formulated mixture clomazone and hexazinone applied in soil or combined with sugarcane mulch, after different periods of permanence without the occurrence of rain. The experiment was carried out in vases under greenhouse conditions in Botucatu, São Paulo, Brazil. The weeds Brachiaria decumbens, Ipomoea grandifolia, Ipomoea hederifolia and Euphorbia heterophylla were sown and covered or not with sugarcane mulch. The experiment was arranged in a complete randomized design with four repetitions. The treatments were displaced in a 3x6 factorial scheme, with the factors being six periods without rain (0, 3, 7, 15, 30, and 60 days) and three modes of herbicide application(on the soil without sugarcane mulch, on and under sugarcane mulch). Control evaluations were carried out at 10, 21, 35 and 42 days after the occurrence of rain. The clomazone + hexazinone mixture promoted an excellent weed control for all the species studied when applied on, under, or without sugarcane mulch. However, the control levels tended to reduce for periods over 60 days without rain.

Effects of soil and foliar application of soluble silicon on mineral nutrition, gas exchange, and growth of potato plants

Silicon can alleviate biotic and abiotic stresses in several crops, and it has beneficial effects on plants under nonstressed conditions. However, there is still doubt about foliar-applied Si efficiency and Si effects on mineral nutrition, physiological processes, and growth of potato (Solanum tuberosum L.) plants under wellwatered conditions. The objective of this study was to evaluate the effect of soil and foliar application of soluble Si on Si accumulation, nutrients, and pigments concentration as well as gas exchange and growth of potato plants. The experiment was conducted under greenhouse conditions in pots containing 35 dm3 of a Typic Acrortox soil. The treatments consisted of a control (no Si application), soil application of soluble Si (50 mg dm-3 Si), and foliar application of soluble Si (three sprays of 1.425 mM Si water solution, prepared with a soluble concentrate stabilized silicic acid), with eight replications. Both soil and foliar application of Si resulted in higher Si accumulation in the whole plant. Foliar application of Si resulted in the greatest Si concentration in leaves, and soil application increased Si concentration in leaves, stems, and roots. Silicon application, regardless of the application method, increased leaf area, specific leaf area, and pigment concentration (chlorophyll a and carotenoids) as well as photosynthesis and transpiration rates of wellwatered potato plants. However, only soil application increased P concentration in leaves and dry weight of leaves and stems. © Crop Science Society of America.

Phytoremediation Potential of Mana-Cubiu (Solanum sessiliflorum Dunal) for the Deleterious Effects of Methylmercury on the Reproductive System of Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Charge effect in the interaction of doxorubicin and derivatives with polydeoxynucleotides

The equilibrium interaction of doxorubicin and its N-acetyl derivative with a series of purine-pyrimidine alternating polydeoxynucleotides has been studied through spectrofluorometry to assess the relevance of the electrostatic contribution to DNA intercalation. The results have shown that: (a) the suppression of the positive charge on the aminosugar has: (I) a profound negative effect on the free energy of intercalation, as expected, and (II) a negligible influence on the base specificity, which supports the notion of an essentially electrostatic effect of N-acetylation on intercalation; (b) a reasonably good accord with the demands of a polyelectrolytic model, due to Friedman and Manning, is found.

Ruminal methane emission by dairy cattle in Southeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Distribuição da carga hidráulica em linhas de derivação otimizadas por programação linear

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pontas de pulverização e eletrificação das gotas na deposição da calda em plantas de crisântemo

O objetivo deste trabalho foi avaliar a deposição das gotas de pulverização, dotadas de carga elétrica (eletrostática), em comparação à técnica de pulverização convencional em crisântemo, com uso de diferentes pontas de pulverização. O experimento foi conduzido em delineamento inteiramente ao acaso, com oito tratamentos: combinação das pontas TXVK-3, AXI 110015, AXI 12002 TWIN e AXI 11003, com duas técnicas de pulverização (com e sem eletrostática), e quatro repetições. Cada repetição foi representada por 12 plantas, às quais foram afixados papéis do tipo mata-borrão na superfície abaxial e adaxial dos folíolos, e em duas posições da planta: ápice e base. Um corante marcador (Rodamina B) foi pulverizado na proporção de 5 g por 100 L d'água em cada um dos tratamentos. Os depósitos do marcador foram quantificados por fluorometria. As pontas com gotas de menor diâmetro mediano volumétrico (TXVK-3 e AXI 110015) apresentaram maiores depósitos na superfície abaxial da folha, quando se utilizou a pulverização eletrostática. Esse fato não foi observado, quando foram pulverizadas gotas com maior diâmetro mediano volumétrico e desprovidas de carga elétrica, nas diferentes partes da planta.

Velocidade do ar em barra de pulverização na deposição da calda fungicida, severidade da ferrugem asiática e produtividade da soja

O trabalho objetivou comparar a deposição da pulverização e o controle da ferrugem asiática após o tratamento com fungicidas sob quatro velocidades da assistência de ar junto à barra de pulverização na cultura da soja. Dois experimentos foram conduzidos na FCA/UNESP - Campus de Botucatu, safra 2006/07. Alvos artificiais foram fixados na superfície adaxial e abaxial de folíolos posicionados nas partes superior e inferior das plantas selecionadas e distribuídas perpendicularmente ao deslocamento do pulverizador. O oxicloreto de cobre (50% de cobre metálico) foi o marcador utilizado em pulverização e a determinação quantitativa dos depósitos feita com o uso de espectrofotometria de absorção atômica. Após a aplicação do fungicida piraclostrobina + epoxiconazole sob diferentes velocidades da assistência de ar junto à barra de pulverização (0, 9, 11 e 29 km h-1) procedeu-se a avaliação da severidade da doença e produtividade da soja. Na parte superior das plantas os maiores níveis de depósitos foram encontrados na pulverização sem assistência de ar. Já na parte inferior da planta foram encontrados os maiores níveis de deposição quando foram utilizadas as maiores velocidades da assistência de ar. No geral, a severidade da doença foi mais acentuada nos tratamentos sem o uso da assistência de ar. em relação à produtividade não houve diferenças entre os tratamentos com aplicação de fungicidas, porém houve incremento na produtividade para os tratamentos com assistência de ar.

Efeito da velocidade do ar em barra de pulverização na deposição de produtos fitossanitários em feijoeiro

Com o objetivo de avaliar o efeito da variação da velocidade do ar em barra de pulverização na deposição da calda na cultura do feijoeiro (Phaseolus vulgaris), realizou-se o experimento em 9 e 10 de outubro de 2000, no Centro de Pesquisas Agronômicas - Cyanamid, em Iracemápolis (SP), em delineamento inteiramente casualizado, aos 48 dias após a emergência (DAE). Para isso, convencionou-se que a rotação máxima do ventilador, medida com o auxílio de fototacômetro, possibilitou a obtenção da velocidade máxima do ar na barra de pulverização e, a partir daí, níveis de 50% e 75% da velocidade máxima do ar. Alvos artificiais foram fixados na superfície adaxial e na abaxial de folíolos posicionados, nos terços superior e inferior das plantas selecionadas, ao acaso, e distribuídas perpendicularmente ao deslocamento do pulverizador. O óxido cuproso (50% de cobre metálico) foi o traçador utilizado em pulverização e a determinação quantitativa dos depósitos feita com o uso da espectrofotometria de absorção atômica. Os resultados sugerem que a variação da velocidade do ar na barra pulverizadora não influenciou sobre os níveis de depósitos no feijoeiro, aos 48 DAE, nas condições do presente trabalho.