The Cathodic Cleavage of the Nitrobenzoyl Group from Protected Aliphatic Amines in N,N-Dimethylformamide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE CATHODIC CLEAVAGE OF THE NITROBENZENESULFONYL GROUP FROM ALIPHATIC-AMINES IN N,N-DIMETHYLFORMAMIDE

The reduction of benzenesulfonyl derivatives of n-butylamine and N,N-di-n-butylamine with nitro substituents at the 2, 3 and 4 positions of the phenyl ring in N,N-dimethylformamide is reported. The N,N-di-n-butyl-4- and N-n-butyl-2-nitrobenzenesulfonamides are reduced in two cathodic steps. The first one, at about -0.90 V vs. SCE, a reversible one-electron process, gives a stable anion radical. The second reduction step at -1.70 V vs. SCE leads to cleavage of the S-N bond in good yields (> 70%). It is shown that the reduction of the N-n-butyl-3- and N-n-butyl-4-nitrobenzenesulfonamide is different, with three reduction steps. The first reduction step occurs with the formation of an unstable anion radical, which decomposes via N-H bond cleavage. The reduction of this sulfonamide anion occurs at -1.16 V vs. SCE and the third cathodic step arises at -1.70 V vs. SCE when the remaining radical anion is reduced to its dianion. The S-N bond cleavage is rapid but is always a minor process. The mechanisms of the reduction are discussed.

Comparative study of the cathodic cleavage of N-tosyl- and N-nosyl-protected amino acids

The electrochemical behaviour of alanine and phenylalanine protected by the toluenesulphonyl (tosyl) and nitrobenzesulphonyl (nosyl) groups was examined in dimethyl formamide. The N-tosyl-protected amino acids are reduced in one cathodic step (-2.4 V/SCE) leading to cleavage of the SN bond after a two-electron transfer process. The N-nosyl-protected amino acids are reduced in three cathodic steps. Cyclic voltammetry and controlled potential electrolysis of N-nosyl amino acids have been used to probe the mechanism of these reductions in an aprotic medium and lead to cleavage of the SN bond in good yields ( > 60%) at -1.10 V/SCE. The comparative study of these compounds is used to comment on the applicability of the electrochemical method of removing protecting groups from amino acids. © 1993.

Electrochemical behavior of the N-nosyl-protected amino acids in N,N-dimethylformamide

The electrochemical reduction of serine, glycine, and leucine protected by the 4-nitrobenzenesulfonyl, group in N,N-dimethylformamide at mercury cathode occurs at two steps. The first one at -0.8 V vs. SCE, after a one-electron transfer, leads the anion radical formation that dimerizes and adsorbs at electrode. In the second step at -1.4 V, an instable dianion forms which then cleaves. The mechanism is discussed.

BEHAVIOR OF THE ANION-RADICALS ELECTROCHEMICALLY GENERATED IN THE REDUCTION OF NOSYL AMIDES

The behaviour of nitrobenzenesulfonamide anion radicals generated from the electrochemical reduction of aliphatic and aromatic amines protected by nitrobenzenesulfonyl (nosyl) groups in N,N-' dimethylformamide has been reported. The species have been characterized by voltammetry and optical and electron spin resonance spectroscopies. The visible spectra of the anion radicals were recorded and the hyperfine splitting constants were assigned to specific proton positions and nitrogen nuclei of the molecule. The stabilities of the anion radicals are affected by electronic properties of the protecting group and specific features of the amines, which show direct influence on the route of cathodic cleavage of the nitrobenzenesulfonamides.

Electrochemical behavior of a nitrobenzenesulfonyl derivative of aniline in aqueous solution

The electrochemical behavior of aniline protected by a nitrobenzene sulphonyl group in aqueous solution at a mercury electrode is reported. At pH < 10 the compound was reduced in a single well-defined step. Reduction of the nitro group involving a preceding protonation step was postulated. Two reduction steps are present at higher pH (pH > 11). Controlled potential electrolysis confirms that the reduction of the nitro group in a four-electron step to N-phenyl-4-hydroxylamine sulphonamide is always the preponderant process. ©1997 Soc. Bras. Química.

The cathodic deprotection of the nitrobenzoyl group from phenyl nitrobenzoates in N,N-dimethylformamide

The reduction of phenyl benzoates with nitro substituents at the 2-,3- and 4-positions of the benzoates in N,N-dimethylformamide is reported. The phenyl 4- and 3-nitrobenzoate are reduced in two cathodic steps. The first one, at about -0.9 V vs. SCE, a reversible one-electron process, gives a rather stable anion radical. The second reduction step at potentials between -1.5 and -2.0 V vs. SCE leads to formation of the dianion, which decomposes giving free phenol in good yields (> 80%). on the other hand, the phenyl 2-nitrobenzoate is reduced in one cathodic step. This step occurs at -0.9 V with formation of an unstable anion radical which decomposes via C-O bond cleavage, giving phenol with a yield of ca. 80%. The mechanisms of the reduction of these compounds are discussed. (C) 1997 Elsevier B.V. S.A.

Determination of the vinylsulphone azo dye, remazol brilliant orange 3R, by cathodic stripping voltammetry

Remazol brilliant orange 3R shows only a voltammetric peak for the reduction of the azo group. No peak was observed for the reduction of the sulfatoethylsulfone or vinylsulfone reactive groups. The reduction of a pre-protonated ate group involving a two-electron process, gives a hydrate derivative in acidic solution. In alkaline solution the reduction process occurs at more negative potential with the formation of an unstable hydrate compound which decomposes via HN-NH bond cleavage and loss of a sulfate group. Optimum conditions are given for the cathodic stripping voltammetric determination of dir: dye in aqueous solution. The optimum accumulation potential and time were 0 V and up to 60 s, respectively. Linear calibration graphs were obtained from 30 to 300 ng ml(-1) in pH 4 and 6.2 to 62 ng ml(-1) in pH 10. The limit of determination obtained was 1.5 ng ml(-1) (pH 10). The coefficient of variation was 2.6% (n = 7) at 62 ng ml(-1) of the reactive dye. (C) 1999 Elsevier B.V. B.V. All rights reserved.

The electrochemical cleavage of the nitrobenzoyl group from butyl nitrobenzoates in N,N-dimethylformamide

The applicability of the nitrobenzoyl group [NO2C6H4CO-] to protecting the functional hydroxyl group was investigated through study of the electrochemical behaviour of the butyl 4-, 3- and 2-nitrobenzoate compounds. These isomers are reduced in two cathodic steps. The first, at potentials of ca. -0.9 V vs. SCE, is attributed to the formation of rather stable anion radicals, involving one-electron transfer. The second, at potentials of ca. -1.7 V vs. SCE, occurs with a two-electron transfer in an ECE process, in which the dianion produced undergoes scission of the C-O bond giving n-butanoate ions with high yields (similar to 80%)

The zymogen-enteropeptidase system: A practical approach to study the regulation of enzyme activity by proteolytic cleavage

The present research describes an efficient procedure to obtain high levels of trypsinogen and chymotrypsinogen by using a simple, rapid, and easily reproducible method. The extraction process and the time-course of activation of zymogens can be carried out in a single laboratory period, without sophisticated equipment. The main objective was to prepare a laboratory class that would stimulate student interest in enzyme regulation, exploring the fact that the catalytic activity of some enzymes is regulated by different mechanisms. The regulation of proteolytic enzymes requires the synthesis of an inactive zymogen and its being irreversibly switched on by specific proteolytic cleavage.

Voltammetric characteristics of miconazole and its cathodic stripping voltammetric determination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical reduction and cathodic stripping voltammetric determination of clotrimazole

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cathodic stripping voltammetric determination of ceftazidime in urine at a hanging mercury drop electrode

A method was developed for the differential-pulse cathodic stripping voltammetric determination of ceftazidime with a hanging mercury drop electrode using its reduction peak at -0.43 V in Britton-Robinson buffer pH 4.0. The optimum accumulation potential and time were -0.15 V and up to 60 s, respectively. Linear calibration graphs were obtained from 1 x 10(-8) M and 1.5 x 10(-7) M. The limit of determination was calculated to be 5 x 10(-9) M. The coefficient of variation was 4% (n = 7) at 1 x 10(-7) M ceftazidime. The effect of various components of urine on the voltammetric response was studied, and creatinine, uric acid, urea, and glucose were shown to interfere in the method. Ceftazidime bound to human albumin gives a unique stripping peak at -0.48 V. Recoveries of 87% +/- 2% of the ceftazidime (n = 5) were obtained from urine spiked with 1.27 mu g ml(-1) using C-18 solid phase extraction cartridges. (C) 1997 Academic Press.

Determination of brilliant blue FCF in the presence and absence of erythrosine and quinoline yellow food colours by cathodic stripping voltammetry

A study of the voltammetric behaviour of the food colours brilliant blue FCF (C.I. 42090), erythrosine (C. I. 45430) and quinolin e yellow (C. I. 47005) in the pH range 2-10 have been carried out by cathodic stripping voltammetry. At pH 4.5 (acetate buffer) with an accumulation potential of 0 V and accumulation time of 30 s, the voltammograms presented well-defined reduction peaks at potential - 0.76 V for brilliant blue FCF, - 0.85 V for quinoline yellow and - 0.54 V for erythrosine. Linear calibration graphs were obtained from 8 to 80 mug l(-1) brilliant blue, from 4 to 43 mug l(-1) quinoline yellow and from 10 to 70 mug l(-1) erythrosine. The method has been successfully applied to identify and quantify binary mixtures of these dyes and applied for determining brilliant blue FCF in commercial food products.

Cathodic stripping voltammetric detection and determination at a hanging mercury-drop electrode of dye contaminants in purified biomaterials: study of the human serum albumin and reactive dye 120 system

Procion red HE-3B (RR120) is an example of dye currently used in affinity purification. A method is described for determining trace amounts of RR120 dye contaminant in human serum albumin by cathodic stripping voltammetry. The method is based on a measure of a well-defined peak at -0.58 V, obtained when samples of HSA protein (0.01-2% w/v) containing dye concentrations are submitted to a heating time of 330 min at 80degreesC in NaOH, pH 12.0 and the samples are removed to a solution containing Britton-Robinson buffer, pH 4.0. Using an optimum accumulation potential and tune of 0 V and 240 s, respectively, linear calibration curves were obtained from 1.0 X 10(-9) to 1.0 X 10(-8) mol 1(-1) for RR120 dye. Leakage/hydrolysis of reactive red 120 from an agarose support (e.g. at pH 2 or 12) can also be conveniently determined at very low levels (sub-mug ml(-1)) by means of cathodic stripping voltammetry, which involves adsorptive accumulation of the dye onto the hanging mercury-drop electrode. (C) 2002 Elsevier B.V. B.V. All rights reserved.