143 resultados para Xeroderma pigmentosum group D
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
The xeroderma pigmentosum complementation group B (XPB) protein is involved in both DNA repair and transcription in human cells. It is a component of the transcription factor IIH (TFIIH) and is responsible for DNA helicase activity during nucleotide (nt) excision repair (NER). Its high evolutionary conservation has allowed identification of homologous proteins in different organisms, including plants. In contrast to other organisms, Arabidopsis thaliana harbors a duplication of the XPB orthologue (AtXPB1 and AtXPB2), and the proteins encoded by the duplicated genes are very similar (95% amino acid identity). Complementation assays in yeast rad25 mutant strains suggest the involvement of AtXPB2 in DNA repair, as already shown for AtXPB1, indicating that these proteins may be functionally redundant in the removal of DNA lesions in A. thaliana. Although both genes are expressed in a constitutive manner during the plant life cycle, Northern blot analyses suggest that light modulates the expression level of both XPB copies, and transcript levels increase during early stages of development. Considering the high similarity between AtXPB1 and AtXPB2 and that both of predicted proteins may act in DNA repair, it is possible that this duplication may confer more flexibility and resistance to DNA damaging agents in thale cress. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
In this work, we investigated the effect of the acetyl-L-carnitine (ALC) supplementation (200 mg/kg/day) on the myenteric neurons of the ileum of rats made diabetic by streptozotocin (35 mg/kg, i.v.). Four groups were used: diabetic (D), diabetic supplemented with ALC (DC), control (C) and control supplemented with ALC (CC). After 15 weeks of diabetes induction the animals were killed and the ileum was collected and subjected to whole-mount preparation to evidence the myenteric neurons through the histochemical technique of the NADH-diaphorase. The density of neurons seen in 12.72 min(2) of ileum showed no difference among the groups, although in group D it was 22% smaller than in group C, while group DC was 9% smaller to group CC. The profiles of the cell bodies (PC) of 1000 neurons per group were analysed. The neurons PC in group D decreased (P < 0.0001) when compared with other groups and increased (P < 0.0001) when compared with group DC. The incidence of neurons with a PC inferior to 200 mu m(2) was larger in group D. The frequency of neurons with a PC higher than 200 mu m(2) in group DC was close to those seen in groups C and CC. We concluded that ALC eases the loss of neurons and makes the incidence of myenteric neurons with a PC higher than 200 mu m(2) similar to the control rats.
Resumo:
As lesões musculares têm sido observadas como as mais frequentes nos esportes. Considerando a produção de espécies reativas de oxigênio como um fator de risco para instalação de lesões e características antioxidantes e anti-inflamatórias do ômega-3, o objetivo deste trabalho foi verificar as alterações histológicas e morfométricas do músculo sóleo de ratos que realizaram natação, associado a uma dieta suplementada com ômega-3. Para sua realização foram utilizados 31 ratos Wistar divididos em quatro grupos, sendo os grupos A e C suplementados com azeite de oliva e B e D com 3g/dia de ômega-3 por quatro semanas. Os grupos C e D foram submetidos à natação cinco dias/semana por 28 dias, com acréscimo de 5% do peso corporal a partir da segunda semana, enquanto que os grupos A e B não realizaram treinamento. Após este período os animais foram sacrificados, o músculo sóleo retirado e corado com Hematoxilina-eosina para avaliação morfológica. Análise de variância bifatorial, com nível de significância de 5%, foi utilizada para análise dos valores do menor diâmetro das fibras musculares. Os grupos A e B (sedentários) apresentaram padrões histológicos de normalidade. O grupo C apresentou aumento do tecido endomisial e do número de núcleos, presença de fibras fagocitadas e de contornos poligonais não mantidos, enquanto que o grupo D apresentou poucas fibras fagocitadas e de contornos poligonais preservados. Com relação à medida do menor diâmetro das fibras musculares, as análises mostraram diferenças para o fator treinamento, mas não para o fator suplementação e a interação entre eles. As alterações histológicas induzidas pelo exercício foram atenuadas no grupo suplementado com ômega-3, sugerindo um efeito protetor da suplementação, contudo, o aumento do diâmetro das fibras para os grupos expostos ao exercício está relacionado ao efeito do treinamento e não à suplementação.
Resumo:
Avaliou-se o efeito da vacina contra coccidiose sobre a habilidade da microbiota cecal anaeróbia (MCA), administrada por diferentes vias (aves tratadas), em proteger pintos de corte da colonização por Salmonella enteritidis (Se). Utilizaram-se 120 aves assim divididas: grupo A, pulverização de MCA em aves vacinadas contra coccidiose e desafiadas com Se, grupo B, inoculação endoesofágica de MCA em aves vacinadas e desafiadas, grupo C, MCA na água de bebida de aves vacinadas e desafiadas, grupo D, aves não tratadas, vacinadas e desafiadas, grupo E, aves não tratadas, não vacinadas e desafiadas e, grupo F, aves não tratadas, não vacinadas e não desafiadas (controle negativo). Utilizaram-se como parâmetros a colonização do trato digestivo por Se e sua presença nas fezes, bem como o peso corporal das aves, avaliados aos dois, sete e 12 dias após o desafio. Nas aves tratadas com MCA, especialmente por meio de pulverização e inoculação endoesofágica, a colonização do ceco por Se e sua presença nas fezes foram menores, mostrando que a ação da MCA contra a colonização de ceco e excreção fecal não foi afetada pelo uso da vacina contra coccidiose em pintos de corte e que a associação MCA/vacina contra coccidiose pode ser utilizada sem que haja comprometimento na eficácia da MCA. Nos grupos que não receberam MCA, vacinados ou não contra coccidiose, houve aumento da colonização cecal, bem como excreção fecal da amostra desafio. O ceco foi o local de maior presença e persistência da Se. O resultado de administração de MCA pela água de bebida não foi tão eficiente, mas somente este tratamento resultou em peso corporal das aves significativamente superior ao das aves do grupo não tratado, não vacinado e desafiado, indicando que a presença de salmonelas paratifóides não interfere na produtividade de frangos de corte. Não se observou diferença no peso das aves dos grupos D (vacinados contra coccidiose) e E (não vacinadas) desafiadas com Se, demonstrando que a vacina não influenciou negativamente o ganho de peso das aves desafiadas com Salmonela enteriditis.
Resumo:
Para avaliar o desempenho e rendimento de carcaça de quatro grupos genéticos de codornas de corte de 1 a 42 dias de idade, foram utilizadas 1.200 codornas distribuídas em delineamento inteiramente casualizado com quatro tratamentos (A, B, C, D) e cinco repetições de 60 aves por parcela. Uma vez por semana as aves foram pesadas para avaliação do ganho médio de peso e consumo médio de ração, além do registro da mortalidade. Aos 42 dias de idade, foram identificados e abatidos 10 machos por parcela, para avaliação do rendimento de carcaça e dos cortes cárneos. No período 1 a 42 de idade, o grupo genético C apresentou maiores peso e ganho médio de peso que os demais grupos. Contudo, para consumo médio de ração, conversão alimentar e mortalidade, não foram observadas diferenças entre os grupos genéticos. Para peso vivo, peso de carcaça, rendimento de carcaça e porcentagem de peito, não foram encontradas diferenças estatísticas entre os grupos genéticos. Para porcentagem de asa, coxa e carne de peito, o grupo genético D apresentou maior valor que os demais grupos. Considerando os resultados obtidos, os grupos genéticos de codornas para produção de carne utilizados no Brasil apresentam diferenças no seu desempenho produtivo e nos cortes cárneos.
Resumo:
Purpose: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method.Materials and Methods: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group (3: two 4-hole conventional straight miniplates; group H. two 4-hole locking straight miniplates; and group 1, 3 bicortical screws in an inverted-L. pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%).Results: The multiparametric comparison of the groups showed a statistically significant difference (P<.01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group D compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F).Conclusion: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups. (C) 2010 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 68:724-730, 2010
Resumo:
This finite element analysis compared stress distribution on complete dentures and implant-retained overdentures with different attachment systems. Four models of edentulous mandible were constructed: group A (control), complete denture; group B, overdenture retained by 2 splinted implants with bar-clip system; group C, overdenture retained by 2 unsplinted implants with o'ring system; and group D, overdenture retained by 2 splinted implants with bar-clip and 2 distally placed o'ring system. Evaluation was performed on Ansys software, with 100-N vertical load applied on central incisive teeth. The lowest maximum general stress value (in megapascal) was observed in group A (64.305) followed by groups C (119.006), D (258.650), and B (349.873). The same trend occurred it) supporting tissues with the highest stress value for cortical bone. Unsplinted implants associated with the o'ring attachment system showed the lowest maximum stress values among all overdenture groups. Furthermore, o'ring system also improved stress distribution when associated with bar-clip system.
Resumo:
Purpose: This study compared the maintenance of tightening torque in different retention screw types of implant-supported crowns.Materials and Methods: Twelve metallic crowns in UCLA abutments cast with cobalt-chromium alloy were attached to external hexagon osseointegrated implants with different retention screws: group A: titanium alloy retention screw; group B: gold alloy retention screw with gold coating; group C: titanium alloy retention screw with diamond-like carbon film coating; and group D: titanium alloy retention screw with aluminum titanium nitride coating. Three detorque measurements were obtained after torque insertion in each replica. Data were evaluated by analysis of variance (ANOVA), Tukey's test (P < 0.05), and t test (P < 0.05).Results: Detorque value reduced in all groups (P < 0.05). Group A retained the highest percentage of torque in comparison with the other groups (P < 0.05). Groups B and D retained the lowest percentage of torque without statistically significant difference between them (P < 0.05).Conclusions: All screw types exhibited reduction in the detorque value. The titanium screw maintained the highest percentage of torque whereas the gold-coated screw and the titanium screw with aluminum titanium nitride coating retained the lowest percentage. (Implant Dent 2012;21:46-50)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objective. The present study evaluated the dynamics of the development of periapical lesions.Study design. Root canals from dogs' teeth were exposed to the oral environment, and then sealed for 7 days (Group A), 15 days (Group B), 30 days (Group C), and 60 days (Group D). After each experimental period, radiographs were taken to detect periapical bone resorption. In addition, histological sections from the periapical region were prepared. The radiographic and histological results were analyzed by ANOVA and Tukey's, Wilcoxon, and Pearson's tests. Significance level was set at 5%.Results. Lesions were radiographically visible at 15 and 30 days, and had similar size at these periods (P > .05). At 60 days, lesions were larger than in the other periods (P < .05). Bone resorption was detected histologically at 7 days. The greatest values of bone resorption were observed at the 30- and 60-day periods (P < .05). The results of the methods of evaluation were similar only at the 30-day period. There was no correlation between the radiographic and histological results.Conclusions. Periapical radiography did not provide detection of periapical lesion in its initial stages. The periapical lesions became more evident radiographically when the bone resorption area increased. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009;107:442-447)
Resumo:
This in vitro study evaluated the marginal gap at the composite tooth/resin interface in class V cavities under the influence of two insertion techniques and a curing system by means of atomic force microscopy (AFM). Forty enamel and dentin cavities were prepared on the buccal surface in bovine teeth with quadratic forms measuring 2 mm X 2 mm and depth of 1.5 mm. The teeth were then divided into four groups: group A, 10 cavities were restored in one increment, light cured by halogen light; group B, 10 cavities filled with bulk filling, light cured by the light emitting diodes (LED); group C, 10 cavities were restored by the incremental technique, light cured by halogen light; group D, 10 cavities were restored by the incremental technique, light cured by the LED. The teeth underwent the polishing procedure and were analyzed by AFM for tooth/restoration interface evaluation. The data were compared between groups using the nonparametric Kruskall-Wallis and Mann-Whitney tests (p < 0.05). The results showed a statistically significant difference between groups A and B and groups A and C. It was concluded that no insertion and polymerization technique was able to completely seal the cavity.
Resumo:
Purpose This in vitro study compared the dimensional accuracy of two impression techniques Duralay splinted impression copings (D) and metal splinted impression copings (M) for implant supported pros theses Materials and Methods A master cast with four parallel implant abutment analogs and a passive framework were fabricated Vinyl polysiloxane impression material was used for all impressions with a metal stock tray Two groups (D and M) were tested (n = 5) The measurement method employed was just one titanium screw tightened to the framework Each group s measurements were analyzed using software that received the images of a video camera coupled to a stereomicroscope at X100 magnification The results were analyzed statistically (t test) Results The mean values of abutment/framework interface gaps were master cast = 32 mu m (SD 2), group D = 165 mu m (SD 60), and group M = 69 mu m (SD 36) There was a statistically significant difference between the D and M groups (P <= 001) Conclusion Under the limitations of this study, it could be suggested that a more accurate working cast can be fabricated using metal splinted impression copings INT J ORAL MAXILLOFAC IMPLANTS 2010 25 1153-1158
Resumo:
The activities of the enzymes aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP), lactate dehydrogenase (LD), creatine kinase (CK), amylase (AMS) and angiotensin converting enzyme (ACE) have been used to assess the toxic effects of xenobiotics that have hypoglycaemic action in hepatic, pancreatic, renal and muscle tissue. Using a validated experimental model of diabetes mellitus in rats, we ascertained whether this syndrome itself affected the serum activities of these enzymes over a 53-day period. Levels of hepatic enzymes AST, ALT and ALP were higher in the streptozotocin (STZ)diabetic rats (group D), but were controlled by insulin therapy (group DI). AMS was reduced in group D and unchanged in group DI rats. Proteinuria was detected 1 day after STZ administation and partially controlled by insulin (group DI); its early presence in group D rats, and the lack of any change in serum ACE in this group, indicates that proteinuria is the better marker for microangiopathy. Microscopic examination of liver, kidney, heart and skeletal muscles (soleus and extensor digitorum longus) revealed various alterations in group D rat tissues, which were less pronounced in group DI. The liver, pancreas and kidney tissue-damage was consistent with the altered serum levels of AST, ALT, ALP and AMS and proteinuria. We conclude that: (i) rigorous control is required when these serum-enzyme levels are used as indicators of tissue toxicity in experimental diabetes, and (ii) LD, CK and bilirubin serum levels, which are unaffected by diabetes, can be used when testing effects of xenobiotics on tissues.
Resumo:
OBJETIVO: O presente estudo teve como objetivo analisar as alterações bioquímicas hepáticas decorrentes da administração de uma dieta hiperlipídica/hiperenergética em ratos. MÉTODOS: Foram utilizados 20 ratos (Wistar) com 90 dias de idade divididos em dois grupos, grupo-controle constituída por ratos eutróficos alimentados com dieta comercial para roedores e grupo-dieta constituída por ratos submetidos a uma dieta hiperlipídica/hiperenergética semi purificada feita com 35% de gordura sendo 31% de origem animal a qual possui 39% de gordura saturada e 4% de origem vegetal (óleo de soja). Os animais do grupo-controle foram mantidos com dieta comercial Purina® e o grupo-dieta com uma dieta hiperlipídica/hiperenergética constituída por 35% de gordura. Após 60 dias de administração de uma dieta hiperlipídica/hiperenergética, analisou-se massa corporal, sensibilidade à insulina, concentração sérica de glicose, insulina e ácidos graxos livres e medida do nível de triglicerídeos, lipídeos totais e atividade lipogênica hepática. RESULTADOS: O grupo-dieta apresentou maior massa corporal e resistência à insulina. No sangue não foram encontradas diferenças entre os grupos para os níveis de glicose. Foi evidenciada maior concentração de insulina e de ácidos graxos livres no soro para o grupo-dieta. No fígado o nível de lipídeos totais, triglicerídeos e taxa lipo-gênica foram superiores às do grupo-controle. CONCLUSÃO: Portanto, nossos achados demonstram que dois meses de ingestão de dieta hiperlipídica/hiperenergética por ratos adultos eleva o peso corporal, ácidos graxos livres hepáticos, diminui a sensibilidade à insulina, demostrando sinais típicos de doença hepática gordurosa não-alcoólica.