85 resultados para Viti-vinifera wines
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
The color characteristics and the phenolic composition related to color of young red wines elaborated with the hybrid grape cultivar BRS Violeta, developed for its adaptation to sub-tropical climates in Brazil, have been studied. These wines are characterized with a deep red-purplish color, reaching color intensity averaging 24 units. In spite of being young red wines elaborated with short maceration time, their content in total polyphenols was very high (around 3692. mg/L, as gallic acid equivalents), especially when compared to similar Vitis vinifera young red wines. Within polyphenols, anthocyanins predominated (around 2037. mg/L, as malvidin 3,5-diglucoside equivalents) and they were almost exclusively anthocyanidin 3,5-glucosides (ca. 97%), mainly built from B-ring tri-substituted anthocyanidins (delphinidin. >. petunidin. ≈. malvidin) and having high proportion of p-coumaroylated derivatives (ca. 28%) that confer higher stability. The content of hydroxycinnamic acid derivatives was also remarkable (ca. 95. mg/L, as caffeic acid equivalents) and unknown glucose derivatives of p-coumaric acid accounted for ca. 42% of total HCAD. Finally, these found flavonols were mainly based on myricetin whereas kaempferol derivatives were missing, their total content being within the ranges usually found for V. vinifera wines, but reaching their top values (ca. 91. mg/L, as quercetin 3-glucoside equivalents). All the aforementioned data suggest that Violeta wine could be considered an important dietary source of healthy polyphenols with a moderate alcoholic content (ca. 11.6%). © 2013 Elsevier Ltd.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The objective of this study was to evaluate the association between the physicochemical properties and sensory acceptance of Brazilian red wines by applying chemometric techniques. Therefore, three winemaking processes were carried out: a traditional winemaking process and two novel winemaking processes, pre-drying and static pomace. Significant differences could be identified amongst the physicochemical properties of the wines (P<0.001). The sensory results showed greater acceptance of the wines made after pre-drying of the grapes or from the static pomace, as compared to commercial brands. Cluster analysis and Multidimensional Scaling were successfully applied and their results demonstrated the influence of the total phenolic content and color indexes on acceptance of the appearance of the wines. The odor was associated with the alcohol content, acidity, dry extract, total and reducing sugars and the body of the wines. The flavor was associated with several physicochemical properties which influenced the overall acceptance of the samples. © 2013 Elsevier Ltd.
Resumo:
Purpose: This paper aims to evaluate the consumer acceptance of Bordô and Isabel wines from innovative winemaking in order to increase red wine consumption by consumers to obtain nutritional benefits. Design/methodology/approach: All wines were produced by a standard procedure of vinification. Pre-drying treatment aimed at drying the grapes up to 22°Brix and static pomace wines presented the constant contact between the must and pomace. Sensory acceptance was carried out by 80 consumers who evaluated eight samples (six experimental wines and two commercial wines) concerning the attributes: appearance, aroma, body, flavor and overall acceptance. Findings: Experimental wines presented higher acceptance when compared to commercial wines and cluster analysis shows the splitting of consumer preferences, highlighting the higher acceptance of traditional Bordô wine and static pomace samples in all sensory attributes. Pre-drying process enhances the concentration of coloured compounds, to highlight the appearance acceptance of these samples. Research limitations/implications: Although this paper has limited the consumer acceptance of red table wines, the innovative treatments will be applied in Vitis vinifera red wines. Practical implications: The wide acceptance of static pomace and pre-drying wines has promoted further information about innovative winemaking that can be applied in Brazilian and worldwide wineries. Social implications: The innovative treatments can change sensorial features of wines and therefore influence the choice of consumers as well as enhancing the nutritional benefits of red wines. Originality/value: The pre-drying and static pomace winemaking are the novelty of this study and the wide acceptance of the sensory attributes concerning these treatments indicates the potential for application in wineries. © Emerald Group Publishing Limited.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O experimento foi conduzido em vinhedo comercial da cv. Rubi, localizado na região Noroeste do Estado de São Paulo. Teve, como objetivo, verificar o efeito do ethephon, aplicado antes da poda de produção, na porcentagem de desfolhamento, tempo de realização da poda, brotação dos ramos, produção da videira, tentando reduzir os custos, melhorando a produtividade e a qualidade. Concluiu-se que a aplicação de 7500ppm de ethephon, 20 dias antes da poda, foi o tratamento que proporcionou maior porcentagem de desfolhamento, menor tempo de realização da poda, maior porcentagem de gemas brotadas e maior produção.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
A reversed phase liquid chromatographic method was developed for the simultaneous determination of carboxylic acids and phenolics in white wines. The samples, diluted, were injected onto a Spherisorb ODS-2 column with a gradient of sulfuric acid (pH 2.5)/methanol as mobile phase. A diode array detector was used which was set at 210nm for carboxylic acids and altered to 278nm, during the run, far phenolics and sorbic acid. The identification of compounds was based on retention time, co-chromatography and UV spectrum. Some clean-up methods (sep-pak C-18 and an ion exchange column) mere tested and did not improve the results.The analysis was simple, with no sample preparation. Application of this method was illustrated by analyses of Brazilian Welchriesling wines.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)(2) plus Mg(NO3)(2) as chemical modifier,to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 mug l(-1) Ph in 0.2% v/v HNO3) were spiked with 25 mug l(-1) Bi. For a 20 mul aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rose wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 mug l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.
Resumo:
In the present research, we studied wines from three different south Brazilian winemaking regions with the purpose of differentiating them by geographical origin of the grapes. Brazil's wide territory and climate diversity allow grape cultivation and winemaking in many regions of different and unique characteristics. The wine grape cultivation for winemaking concentrates in the South Region, mainly in the Serra GaA(0)cha, the mountain area of the state of Rio Grande do Sul, which is responsible for 90% of the domestic wine production. However, in recent years, two new production regions have developed: the Campanha, the plains to the south and the Serra do Sudeste, the hills to the southeast of the state. Analysis of isotopic ratios of (18)O/(16)O of wine water, (13)C/(12)C of ethanol, and of minerals were used to characterize wines from different regions. The isotope analysis of delta(18)O of wine water and minerals Mg and Rb were the most efficient to differentiate the regions. By using isotope and mineral analysis, and discrimination analysis, it was possible to classify the wines from south Brazil.
Resumo:
A flow-injection system is proposed for the spectrophotometric determination of sulphite in white wines. The method involves analyte conversion to SO2, gas diffusion through a Teflon® semi-permeable membrane, collection into an alkaline stream (pH 8), reaction with Malachite green (MG) and monitoring at 620 nm. With a concentric tubular membrane, the system design was simplified. Influence of reagent concentrations, pH of donor and acceptor streams, temperature, timing, surfactant addition and presence of potential interfering species of the wine matrix were investigated. A pronounced (ca. 100%) enhancement in sensitivity was noted by adding cetylpyridinium chloride (CPC). The proposed system is robust and baseline drift is not observed during 4 h operating periods. Only 400 μL of sample and 0.32 mg MG are required per determination. The system handles 30 samples per hour, yielding precise results (r.s.d. < 0.015 for 1.0 - 20.0 mg L-1 SO2) in agreement with those obtained by an alternative procedure.
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA
Resumo:
Brazilian wines are appreciated by consumers for having fruity odor and taste which are typical from Vitis labrusca cultivars. The rusticity of these cultivars, the winemaking and the physicochemical properties are some of the key factors to obtain a quality beverage. In this context, the aim of this article was to analyze the quality of three white wines from wineries located in northwest region of São Paulo state by determining physicochemical properties and sensory profile. Data were analyzed by statistical tests and by Principal Component Analysis (PCA). It was possible to observe statistical differences (P<0,05) in most physicochemical properties. Furthermore, the PCA showed that the attributes body and color significantly explained the variance of the first and second component, respectively, higlighting the Vitis vinifera wine. Thus the connection between the physicochemical and sensory properties of white wines was important for characterization of these beverages produced in the northwest of São Paulo.
Resumo:
BACKGROUND Density and viscosity are properties that exert great influence on the body of wines. The present work aimed to evaluate the influence of the alcoholic content, dry extract, and reducing sugar content on density and viscosity of commercial dry red wines at different temperatures. The rheological assays were carried out on a controlled stress rheometer, using concentric cylinder geometry at seven temperatures (2, 8, 14, 16, 18, 20 and 26 degrees C).RESULTSWine viscosity decreased with increasing temperature and density was directly related to the wine alcohol content, whereas viscosity was closely linked to the dry extract. Reducing sugars did not influence viscosity or density. Wines produced from Italian grapes were presented as full-bodied with higher values for density and viscosity, which was linked to the higher alcohol content and dry extract, respectively.CONCLUSIONThe results highlighted the major effects of certain physicochemical properties on the physical properties of wines, which in turn is important for guiding sensory assessments. (c) 2014 Society of Chemical Industry