75 resultados para Viscoelastic Agent
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
This work presents results concerning the preparation of redispersible tin oxide nanoparticles achieved by using Tiron molecule ((OH)(2)C(6)H(2) (SO(3)Na)(2)) as surface modifying agent. The adsorption isotherm measurements show that an amount of 10 wt.% of Tiron is need to recover the SnO(2) nanoparticles surface with a monolayer. These nanoparticles can be easily redispersed in tetramethyl ammonium hydroxide at pH greater than or equal to11 until a powder concentration of 12 vol.% of tin. Under these conditions, hydrodynamic particle size is about 7 nm and increases until 52 nm at pH 6 due to the aggregation phenomenon. The time evolution of the viscoelastic properties indicates that the suspensions at pH 12.5, containing 12 vol.% tin oxide and 10 wt.% of surface modifier are kinetically stable. After thermal treatment at different temperature the powder characterisation evidences that the presence of Tiron monolayer at the nanoparticles surface increases the thermal stability of the porous texture and prevent the micropore size growth. This set of results contributes to satisfy the demand for more controlled synthesis of nanoparticles with high thermal stability as required for fabrication of ultrafiltration ceramic membranes. (C) 2004 Elsevier Ltd. All rights reserved.
Resumo:
Alternaria alternata, the causal agent of Alternaria brown spot (ABS), causes necrosis on leaves, twigs, and fruit, reducing the productivity and quality of fruits. Tangerines and their hybrids are highly susceptible to the disease. Species, hybrids, and cultivars of Citrus from the germplasm bank of the Estacao Experimental de Citricultura de Bebedouro, São Paulo, Brazil, were evaluated in 2004 and 2005 with respect to their resistance to A. alternata, both through natural infection and by inoculation. Detached leaves were also used to demonstrate susceptibility or resistance to the disease. Ten cultivars of Satsumas (Citrus unshiu), and 14 cultivars of Clementine mandarin (C. clementina) did not show any symptoms of the disease in their leaves, either through natural infection or when inoculated in the field. The Burguess SRA-412, Wallent SRA-438, Carvalhais, Ampefy SRA-459, Ananas SRA, and Macaque SRA-426 mandarin hybrids (C. reticulata) did not show symptoms of the disease under natural or artificial infection in the field. Some cultivars of C. deliciosa, C. tangerina, C. erythrosa, and C. temple showed symptoms of the disease, even though no previous record of their susceptibility to Alternaria brown spot had been previously reported. The hybrids Fairchild, Nova, Page, Fortune, and Sunburst were susceptible to the disease. However, Fremont mandarin (a crossing between C. clementina and C. reticulata), Encore (C. nobilis x C. deliciosa), and Fallglo (C. reticulata x C. paradisi) did not show symptoms in field, and few symptoms were verified in detached leaves. These materials are promising for the cultivation of tangerines, and will enable genetic improvement for the development of cultivars resistant to Alternaria brown spot. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
Biofertilizers generated from the anaerobic and aerobic digestion of cattle manure, known as Bio1 and Bio2, respectively, were studied with regard to their microbial composition and effect on the mycelial growth of Phyllosticta citricarpa, the causal agent of citrus black spot (CBS). Two field experiments were conducted to determine the biofertilizer's potential (Bio1) in controlling CBS (2001/2002 and 2002/2003 crops). It was observed that the greatest number of microorganisms was found in the aerobically produced biofertilizer. Bio2 did not inhibit the mycelial growth of P. citricarpa. Mycelial growth of P. citricarpa was inversely proportional to the Bio1 biofertilizer concentration. In the 2001/2002 cropping season, the Biol effect in controlling CBS was directly proportional to its concentration, at the rate of 0 (healthy fruit), with R-2 = 0.88. Biol had a significant effect in controlling CBS, at a concentration of 10%, during the 2001/2002 cropping season, with DI values of 0.246 and 0.229 for the. 10 and 20% doses, respectively, compared to DI of 0.329 for the control. A directly proportional effect of the biofertilizer concentration on the percentage of fruits with a rating of zero was. also observed in the 2002/2003 cropping season, with R-2 = 0.48. However, even at doses higher than in the preceding cropping season, the biofertilizer was less effective, possibly due to a higher occurrence of the disease. Copper oxychloride and combined applications of copper oxychloride and carbendazim plus mancozeb controlled the disease. The possibility of using the biofertilizer as a protective biofungicide to replace copper oxychloride, especially in organic agriculture, should be explored. (c) 2005 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Citrus black spot (CBS) is a fungal disease, caused by Guignardia citricarpa, that has a high economic impact on citrus. Although G. citricarpa has been associated with black spot of citrus, an adequate pathogenicity test is still not available. Thus, our objective was to develop and evaluate a simple, safe, and practical pathogenicity test. We used fruits from Pera-Rio and Valencia sweet orange trees from two different orchards, located in the State of São Paulo, Brazil. Inoculation was performed by placing six disks colonized by G. citricarpa, onto the peel of healthy fruits, previously bagged. In the Pera-Rio sweet orange grove, initial symptoms of the false melanose type resulting from the inoculations were observed 55 days after inoculation (dai). In the Valencia grove, initial symptoms also of the false melanose type resulting from the inoculations occurred 73 dai. A total of 92.8% and 86.6% of the Pera Rio and Valencia fruits inoculated, respectively, showed symptoms of CBS. Citrus black spot symptoms were not observed in any of the control fruits.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pyrazinamide was condensed with the poly(ethylene glycol)-poly(aspartic acid) copolymer (PEG-PASP), a micelle-forming derivative was obtained that was characterized in terms of its critical micelle concentration (CMC) and micelle diameter. The CMC was found by observing the solubility of Sudan III in Poly(ethylene glycol)-poly(pyrazinamidomethyl aspartate) copolymer (PEG-PASP-PZA) solutions. The mean diameter of PEG-PASP-PZA micelles, obtained by analyzing the dynamic light-scattering data, was 78.2 nm. The PEG-PASP-PZA derivative, when assayed for anti-Mycobacterium activity, exhibited stronger activity than the simple drug.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
On-line learning methods have been applied successfully in multi-agent systems to achieve coordination among agents. Learning in multi-agent systems implies in a non-stationary scenario perceived by the agents, since the behavior of other agents may change as they simultaneously learn how to improve their actions. Non-stationary scenarios can be modeled as Markov Games, which can be solved using the Minimax-Q algorithm a combination of Q-learning (a Reinforcement Learning (RL) algorithm which directly learns an optimal control policy) and the Minimax algorithm. However, finding optimal control policies using any RL algorithm (Q-learning and Minimax-Q included) can be very time consuming. Trying to improve the learning time of Q-learning, we considered the QS-algorithm. in which a single experience can update more than a single action value by using a spreading function. In this paper, we contribute a Minimax-QS algorithm which combines the Minimax-Q algorithm and the QS-algorithm. We conduct a series of empirical evaluation of the algorithm in a simplified simulator of the soccer domain. We show that even using a very simple domain-dependent spreading function, the performance of the learning algorithm can be improved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fiber reinforced epoxy composites are used in a wide variety of applications in the aerospace field. These materials have high specific moduli, high specific strength and their properties can be tailored to application requirements. In order to screening optimum materials behavior, the effects of external environments on the mechanical properties during usage must be clearly understood. The environmental action, such as high moisture concentration, high temperatures, corrosive fluids or ultraviolet radiation (UV), can affect the performance of advanced composites during service. These factors can limit the applications of composites by deteriorating the mechanical properties over a period of time. Properties determination is attributed to the chemical and/or physical damages caused in the polymer matrix, loss of adhesion of fiber/resin interface, and/or reduction of fiber strength and stiffness. The dynamic elastic properties are important characteristics of glass fiber reinforced composites (GRFC). They control the damping behavior of composite structures and are also an ideal tool for monitoring the development of GFRC's mechanical properties during their processing or service. One of the most used tests is the vibration damping. In this work, the measurement consisted of recording the vibration decay of a rectangular plate excited by a controlled mechanism to identify the elastic and damping properties of the material under test. The frequency amplitude were measured by accelerometers and calculated by using a digital method. The present studies have been performed to explore relations between the dynamic mechanical properties, damping test and the influence of high moisture concentration of glass fiber reinforced composites (plain weave). The results show that the E' decreased with the increase in the exposed time for glass fiber/epoxy composites specimens exposed at 80 degrees C and 90% RH. The E' values found were: 26.7, 26.7, 25.4, 24.7 and 24.7 GPa for 0, 15, 30, 45 and 60 days of exposure, respectively. (c) 2005 Springer Science + Business Media, Inc.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)