Crescimento e nutrição de plantas de leucena (Leucaena leucocephala (Lam.) R. de Vit) sob salanidade

Excessive salt can to promote water soil retention, reducing your availability to plants. Besides, they can interfere in protoplasm metabolism. The plants ability to survive in salinity conditions is an important factor to geographic distribution and agriculture in salinized regions. The objective of this work was to verify the effects of the NaCl in the growth, dry matter distribution and N, K, Ca, Mg, Na, and Cl content in young plants. The experiment was conducted in 'Leonard' pots, with nutrient solutions, with NaCl ( 0, 25, 50 and 100 mmol L(-1)). Increasing of NaCl concentration reduces growth and total dry matter. There was an increase of N and K content, in shoots, and N and Mg content in roots. There was an reduction in Mg content in shoots, and reduction of Ca content in roots with increasing of NaCl. Leucaena plants were inefficient to exclude Na and Cl, in shoots principally.

Efeito da suplementação de vitamina C (vit.C) sobre os efeitos decorrentes das alterações nutricionais da cirrose biliar secundária: estudo experimental em ratos jovens

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Uso combinado de sêmen sexado e acasalamento dirigido sobre uma população de bovinos de corte submetida a seleção: estudo de simulação

Desenvolveu-se um estudo de simulação estocástica com o objetivo de verificar as consequências do uso combinado de acasalamento dirigido e sêmen sexado em uma população de bovinos de corte sob seleção. Simularam-se seis gerações de seleção para três cenários de acasalamento e uso de sêmen sexado. O primeiro cenário foi caracterizado por acasalamento aleatório e uso exclusivo de sêmen convencional. O segundo cenário caracterizou-se pelo uso de acasalamento associativo positivo nas 40% melhores vacas e acasalamento associativo negativo nas demais, sem uso de sêmen sexado. O terceiro cenário seguiu o mesmo procedimento de acasalamento do segundo, combinando-o com uso de sêmen sexado nas vacas submetidas a acasalamento associativo positivo. O acasalamento associativo positivo teve maior impacto no progresso genético que o uso de sêmen sexado, apesar de ter aumentado a incidência de endogamia na população. O uso de acasalamento associativo negativo foi ineficiente em reduzir a variabilidade dos animais destinados ao abate. O uso combinado de acasalmento associativo positivo e sêmen sexado aumentou a produção de animais geneticamente superiores.

Avaliação de genótipos de bananeira em Botucatu-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-química dos frutos de genótipos de bananeira produzidos em Botucatu-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correlaçôes fenotípicas entre características de produção e crescimento em genótipos de bananeira

The correlations between the characters seen in experimental trials are generated by genetic and environmental factors and are estimated for the purpose of measuring the change in a character when the selection is practised in another. The objective was to correlate bunch weight with characteristics of growth and production of 4 genomic groups of banana: 'Nanicao-IAC-2001', 'Grand Naine', 'Caipira' and 'Nam' ( AAA); 'Ma a', 'Thap Maeo', 'Prata Ana' and 'Prata Zulu' (AAB), 'Fhia 01', 'Fhia 18', 'Prata Grauda' and 'Maca Tropical' (AAAB) and 'Figo Cinza' (ABB), Botucatu, Brazil. Some growth characteristics were evaluated such as: plant heights, the pseudostem circumference, number of leaves, number of days between planting and flowering, number of days between flowering and harvest and number of days from planting to harvest. These characteristics were measured at the flowering time. The production characteristics such as the bunch weigth, number of fruits, average weigth of the fruits, productivity, number of hands and weight, number, length and diameter of the fruits of the 2(nd) hand. The correlations between the characteristics studied varied for each genotype, but they all showed significant correlation between the bunch weight and the characteristics fruit weigth and productivity. The correlations involving all genotypes were predominantly positive and significant.

O internato escolar O Ateneu: produção de subjetividade na instituição total

Dans cet article on cherche à identifier les effets de l'institutionnalisation dans la production de la subjectivité dans un établissement scolaire total. La recherche est basée sur le roman «O Ateneu » de Raul Pompeia, analysé à partir de la théorie de Goffman (1961-1987) relative aux institutions totales. on décrit l itinéraire moral que le personnage Sergio développe, à son entrée à l'internat, évoquant les vicissitudes par lesquelles il passe dans ce contexte institutionnel : période d'adaptation, crises évolutives, initiations sexuelles, problèmes de rivalités, etc. les établissements totaux semblent s'organiser d'une façon caractéristique et fonctionner de manière autonome. on pourra comprendre les problèmes sociaux et les effets sur la subjectivité produite par les institutions totales par l étude des relations de pouvoir subjacentes à ces types d'établissements. Le temps pendant lequel un individu vit comme interné peut laisser des marques profondes dans sa subjectivité et se configure comme un thème personnel approprié.

Perfil eletroforético e concentração de imunoglobulinas G (IgG) do soro sanguíneo de cabras Saanen com mastite experimental induzida por Staphylococcus aureus suplementadas com vitamina E

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

COLOR STABILITY of SEALED COMPOSITE RESIN RESTORATIVE MATERIALS AFTER ULTRAVIOLET ARTIFICIAL AGING and IMMERSION IN STAINING SOLUTIONS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Artificial Aging on the Roughness and Microhardness of Sealed Composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biocompatibility of resin-based materials used as pulp-capping agents

Aim To evaluate and compare the response of pulps of rats capped with resin-modified glass-ionomer cement (RMGIC) or self-etching adhesive system.Methodology Class I cavities were prepared on the occlusal surface of 54 maxillary first molars of 27 rats. Pulp exposure was performed on the cavity floor. The following resin-based materials were applied as pulp-capping agents: G1, Clearfil Liner Bond 2V (CLB 2V; Kuraray Co., Japan); G2, Vitrebond (VIT; 3M/ESPE, USA). In group 3 (control group), a calcium hydroxide/saline paste (CH; Labsynth, Brazil) was used. The cavities were restored with amalgam. After 7, 30 and 60 days, the animals were sacrificed and the jaws were processed for microscopic evaluation.Results Despite the inflammatory response caused by the experimental and the control materials at 7 days, pulpal healing associated with calcified barrier formation was observed at 60 days following the pulp therapy. Both resin-based materials promoted a large zone of cell-rich fibrodentine matrix deposition on the pulp horn related to the pulp exposure site, which was larger to VIT than to CLB 2V specimens. Tertiary dentine underneath the fibrodentine matrix was deposited by a layer of elongated pulpal cells. The remaining pulpal tissue exhibited normal histological characteristics. In the control group, healing and dentine-bridge formation was observed at 30 days. Pulpal breakdown occurred only when bacterial infection occurred.Conclusion Both experimental pulp-capping agents allowed pulpal healing characterized by cell-rich fibrodentine and tertiary dentine deposition as well as calcified barrier formation.

Cytotoxicity of resin-based light-cured liners

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Biocompatibility of a resin-modified glass-ionomer cement applied as pulp capping in human teeth

Purpose: to evaluate the human pulp response following pulp capping with calcium hydroxide (CI-I, Group 1), and the resin-modified glass-ionomer Vitrebond (VIT, Group 2). Materials and Methods: Intact teeth with no cavity preparation were used as control Group (ICG, Group 3). Buccal Class V cavities were prepared in 34 sound human premolars. After exposing the pulps, the pulp capping materials were applied and the cavities were Filled using Clearfil Liner Bond 2 bonding agent and Z100 resin-based composite. The teeth were extracted after 5, 30, and from 120 to 300 days, fixed in 10% buffered formalin solution, and prepared according to routine histological techniques. 6-mu m sections were stained with hematoxylin and eosin, Masson's trichrome, or Brown gr Brenn technique for bacterial observation. Results: At 5 days, CH caused a large zone of coagulation necrosis, the mononuclear inflammatory reaction underneath the necrotic zone was slight to moderate. VIT caused a moderate to intense inflammatory pulp response with a large necrotic zone. A number of congested venules associated with plasma extravasation and neutrophilic infiltration was observed. Over time, only CH allowed pulp repair and complete dentin bridging around the pulp exposure site. VIT components displaced into the pulp tissue triggered a persistent inflammatory reaction which appeared to be associated with a lack of dentin bridge formation. After 30 days a few histological sections showed a number of bacteria on the lateral dentin walls. In these samples the pulp response was similar to those samples with no microleakage. VIT was more irritating to pulp tissue than CH, which allowed pulp repair associated with dentin bridge formation. These results suggested that VIT is not an appropriate dental material to be used in direct pulp capping for mechanically exposed human pulps.

Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.

Streptococcus mutans Biofilm Adhesion on Composite Resin Surfaces After Different Finishing and Polishing Techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)