Estudo e modelagem 3D de uma turbina Francis

Most of the hydraulic turbines that are running in the world are the Francis type, because they are able to fit a wide range of head and flow. We also can declare that most of the installed hydraulic energy up to this date is generated by this type of turbine. On the other hand, if we pay attention to mechanical details of a Francis turbine we will see that among the three most used types it is the one that presents the more complex design. And, the simplest one is the Pelton type, whereas the Kaplan is the one less utilized. This work aims to develop the hydrodynamic calculation of a Francis turbine as well as to obtain its assembly drawing and 3D modeling drawing. In this way all details must be shown therefore needing a complete knowledge about this issue. Both 2D and 3D drawings help much if one wants the machine to be running in its power house. It is well noted that most of the entities that design and manufacture the Francis turbines are not brazilian. In this way the more we study how to design this kind of machine the more is our contribution to our country in order to conquer technology and manufacture Francis turbines

Modelagem matemática para otimização de um potencial hidráulico utilizando turbinas Francis e Kaplan

Pós-graduação em Engenharia Mecânica - FEG

Analysis of the performance of an extraction-condensation steam turbine on a cogeneration system of a Brazilian sugar-alcohol factory

In this work a detailed thermodynamic analysis for an extraction-condensation steam turbine capable to drive a 40 MVA electricity generator in a sugar-alcohol factory was carried out. The use of this turbine in the cogeneration system showed that its efficiency contributed to increase the power generation, although the condensation reduces the overall efficiency of the plant. Sensibility analyses were performed to evaluate the behavior of the overall energy efficiency of a plant with the extraction-condensation turbine in function of the boiler efficiency, the specific consumption of steam in the processes and the condensation rate in the turbine. It was observed that the plant efficiency is very sensible to the condensation rate variation and it increases when there is an increase in the demand of steam for processes.

Comparative Histopathological Analysis of Human Pulps after Class I Cavity Preparation with a High-Speed Air-Turbine Handpiece or Er:YAG Laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de sistema computacional para pré-dimensionamento de turbinas para micro, mini e pequenas centrais hidrelétricas

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Texto-coisa, poema-objeto: a políedrica p(r)oesia de Murilo Mendes e Francis Ponge

Pós-graduação em Estudos Literários - FCLAR

Sobre um método assemelhado ao de Francis para a determinação de autovalores de matrizes

Pós-graduação em Matemática - IBILCE

As vozes e as coisas: a poesia em prosa de Murilo Mendes e Francis Ponge

O livro compara duas importantes obras de poesia em prosa das literaturas brasileira e francesa, o Poliedro, de Murilo Mendes e o Le parti pris des choses, de Francis Ponge, publicadas respectivamente em 1972 e 1942. Para a autora, a aproximação se justifica pelo foco dado nas duas obras aos objetos mais cotidianos possíveis e, ainda, pelo posicionamento diferente dos sujeitos líricos muriliano (menos objetivo) e pongiano (mais objetivo) diante das coisas simples do mundo. O brasileiro e o francês também partilhariam de uma determinada comunidade de interesses históricos, literários e sociais, ainda que as obras em questão estejam separadas por um intervalo de publicação de trinta anos e, neste intervalo, tenham ocorrido acontecimentos políticos, sociais e artísticos que reverberaram inevitavelmente na literatura desses poetas. Para a autora, a própria escolha da forma do poema em prosa pelos dois autores também os uniria, na medida em que este formato contribuiu enormemente para a construção singular dos objetos, bem como das duas vozes líricas tão particulares

Thermodynamic analysis and comparison of downdraft gasifiers integrated with gas turbine, spark and compression ignition engines for distributed power generation

The objective of the present article is to assess and compare the performance of electricity generation systems integrated with downdraft biomass gasifiers for distributed power generation. A model for estimating the electric power generation of internal combustion engines and gas turbines powered by syngas was developed. First, the model determines the syngas composition and the lower heating value; and second, these data are used to evaluate power generation in Otto, Diesel, and Brayton cycles. Four synthesis gas compositions were tested for gasification with: air; pure oxygen; 60% oxygen with 40% steam; and 60% air with 40% steam. The results show a maximum power ratio of 0.567 kWh/Nm(3) for the gas turbine system, 0.647 kWh/Nm(3) for the compression ignition engine, and 0.775 kWh/Nm(3) for the spark-ignition engine while running on synthesis gas which was produced using pure oxygen as gasification agent. When these three systems run on synthesis gas produced using atmospheric air as gasification agent, the maximum power ratios were 0.274 kWh/Nm(3) for the gas turbine system, 0.302 kWh/Nm(3) for CIE, and 0.282 kWh/Nm(3) for SIE. The relationship between power output and synthesis gas flow variations is presented as is the dependence of efficiency on compression ratios. Since the maximum attainable power ratio of CIE is higher than that of SIE for gasification with air, more research should be performed on utilization of synthesis gas in CIE. (C) 2014 Elsevier Ltd. All rights reserved.

Performance and emissions of a gas turbine engine using ox tallow ethyl-ester blended with kerosene

The performance and emissions behavior of a Rover 1S/60 turboshaft engine when operated with several blends of aviation kerosene and ox tallow ethyl-ester are shown in this article. The tests were performed with a compressor shaft coupled to an hydraulic dynamometer where data of power and mass fuel flow were collected to determine the brake specific fuel consumption. A flue gas analyzer was positioned at the exhaust duct to collect oxygen, carbon dioxide, carbon monoxide and nitrous oxides. An increase in the specific fuel consumption was observed due to the lesser lower heating value of the most oxygenated blends. However, reductions of CO, CO2 and NO (x) have been observed and no-significant ill effects have occurred in the turbine operation.

Murilo Mendes, Francis Ponge e o poema em prosa

The present paper aims to discuss the configuration of the prose poem both in the works of Murilo Mendes' Poliedro (1972) and Francis Ponge's Le parti pris des choses (1942). From the beginning, the similarity between both works is explained by the impulse of focusing on daily objects and also the diverse positioning of the lyrical subjects in Murilo Mendes (less objective) and Francis Ponge (more objective) when they establish a relation with the simple things they wish to marvel. In accordance, the form of the prose poem helps to build this specific and singular view of the objects. Using this background to dialogue with the critical scholarly resources on both writers, we briefly analyse some poems and set out to reflect on the prose poem, which holds the works of the Brazilian and the French poets open to comparison.

Tradução anotada, autor-tradutor invisível: Richard Francis Burton na Brasiliana

The aim of this paper is to analyze the translation of the work by the translator-traveller Richard Francis Burton, Explorations of the Highlands of the Brazil, with a full account of the gold and diamond mines, made by Américo Jacobina Lacombe, trying to relate the work of the latter to the editorial goals of the Brasiliana Collection. As a subseries of the Biblioteca Pedagógica Brasileira [Brazilian Pedagogical Library] published by Companhia Editora Nacional, Brasiliana was conceived in agreement with the 1930s and 1940s policies to expand lay education and make it possible for Brazilians to get to better know the greatness of their country. The paper will focus on the numerous translator’s notes, since many of them reveal Lacombe’s didactic purpose of informing readers about Brazilian history and geography. The analysis also examines the effacement of Burton’s translations from Portuguese into English in his book.

Thermodynamic, Economic and Emissions Analysis of a Micro Gas Turbine Cogeneration System operating on Biofuels

Pós-graduação em Engenharia Mecânica - FEG