Beak-trimming methods and their effect on the performance of japanese quail pullets (Coturnix japonica)

This study aimed at verifying if beak-trimming methods in Japanese quail pullets could optimize production by decreasing stress caused by cannibalism. A total number of 816 day-old Japanese quails was distributed in a completely randomized experimental design in a 2 x 3 factorial arrangement, with two beak-trimming ages (14 and 21 days of age) and three beak-trimming sizes (not trimmed, 1/3 trimmed, or 1/2 trimmed), and 4 replicates of 34 birds per replicate. Birds were submitted to the same management and feeding conditions. Weight gain, feed intake, feed conversion ratio, and mortality were evaluated. There was no significant effect of age at beak trimming on the evaluated parameters (P>0.05), as well as no significant interaction between age at beak trimming, and beak-trimming method. There was a significant effect (P<0.01) of trimming size on performance, with the best performance observed in birds not submitted to beak trimming or had 1/2 of the beak trimmed. When the beak was more aggressively trimmed (1/2), parameters were worse. According to the obtained results, it is recommended to trim 1/3 of the beaks, which can be performed either at 14 or 21 days of age.

Nitric oxide modulates the cardiovascular effects elicited by acetylcholine in the NTS of awake rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A linear optimization approach to the combined production planning model

Two fundamental processes usually arise in the production planning of many industries. The first one consists of deciding how many final products of each type have to be produced in each period of a planning horizon, the well-known lot sizing problem. The other process consists of cutting raw materials in stock in order to produce smaller parts used in the assembly of final products, the well-studied cutting stock problem. In this paper the decision variables of these two problems are dependent of each other in order to obtain a global optimum solution. Setups that are typically present in lot sizing problems are relaxed together with integer frequencies of cutting patterns in the cutting problem. Therefore, a large scale linear optimizations problem arises, which is exactly solved by a column generated technique. It is worth noting that this new combined problem still takes the trade-off between storage costs (for final products and the parts) and trim losses (in the cutting process). We present some sets of computational tests, analyzed over three different scenarios. These results show that, by combining the problems and using an exact method, it is possible to obtain significant gains when compared to the usual industrial practice, which solve them in sequence. (C) 2010 The Franklin Institute. Published by Elsevier Ltd. All rights reserved.

Human leukocyte antigen-G expression after kidney transplantation is associated with a reduced incidence of rejection

HLA-G is a non-classic Human Leukocyte Antigen (HLA-G) Class I of low polymorphism and restricted tissue distribution that displays tolerogenic functions. In heart transplantation and in combined liver/renal allograft transplantation, the expression of HLA-G has been associated with a lower incidence of acute graft rejection episodes and absence of chronic dysfunction. Since the expression of HLA-G in renal biopsies has been investigated only in few patients who received a combined kidney and liver transplant, in this study we performed a cross-sectional study, systematically comparing the expression of HLA-G in post-transplanted renal grafts, stratifying patients according to the presence or absence of rejection.Patients and Methods: Seventy-three renal specimens (10 with acute rejection and 13 with chronic allograft nephropathy, and 50 with no signs of rejection) were immunohistochemically evaluated for HLA-G expression.Results: In the group as a whole, HLA-G molecules were detected in 40 cases (54.8%). Among specimens that presented HLA-G expression, 2 out of 40 (5%) exhibited acute rejection, 2 (5%) exhibited chronic allograft nephropathy, and the remaining 36 (90%) exhibited no signs of rejection. The comparison between patients with rejection and those without rejection showed that the expression of HLA-G was significantly increased in specimens exhibiting no signs of rejection (p<0.0001). Considering only patients with acute rejection, 8 out of 10 patients showed no HLA-G expression in their kidney biopsies when compared to patients exhibiting no signs of rejection and absence of HLA-G was observed in 14 out of 50 (p=0.0032). Similarly, considering only patients with chronic allograft nephropathy, absence of HLA-G expression was observed in I I out of 13 specimens, whereas in patients without rejection absence of HLA-G was observed in 14 out of 50 (p=0.003). Therapy with tacrolimus was significantly associated with the expression of HLA-G and a better graft prognosis. Conclusions: Our results suggest that HLA-G expression in the kidney allograft and the use of tacrolimus are associated with a lower frequency of acute renal rejection and chronic allograft nephropathy. (c) 2007 Elsevier B.V. All rights reserved.

Comparison of proton energy loss in thick absorbers in terms of a reduced calibration curve

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Clonagem do abacateiro variedade Duke 7 (Persea americana Mill.) por alporquia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparison of GEANT4 simulations with experimental data for thick al absorbers

Proton beams in medical applications deal with relatively thick targets like the human head or trunk. Therefore, relatively small differences in the total proton stopping power given, for example, by the different models provided by GEANT4 can lead to significant disagreements in the final proton energy spectra when integrated along lengthy proton trajectories. This work presents proton energy spectra obtained by GEANT4.8.2 simulations using ICRU49, Ziegler1985 and Ziegler2000 models for 19.68MeV protons passing through a number of Al absorbers with various thicknesses. The spectra were compared with the experimental data, with TRIM/SRIM2008 and MCNPX2.4.0 simulations, and with the Payne analytical solution for the transport equation in the Fokker-Plank approximation. It is shown that the MCNPX simulations reasonably reproduce well all experimental spectra. For the relatively thin targets all the methods give practically identical results but this is not the same for the thick absorbers. It should be noted that all the spectra were measured at the proton energies significantly above 2MeV, i.e., in the so-called Bethe-Bloch region. Therefore the observed disagreements in GEANT4 results, simulated with different models, are somewhat unexpected. Further studies are necessary for better understanding and definitive conclusions. © 2009 American Institute of Physics.

Reduced calibration curve for proton computed tomography

The pCT deals with relatively thick targets like the human head or trunk. Thus, the fidelity of pCT as a tool for proton therapy planning depends on the accuracy of physical formulas used for proton interaction with thick absorbers. Although the actual overall accuracy of the proton stopping power in the Bethe-Bloch domain is about 1%, the analytical calculations and the Monte Carlo simulations with codes like TRIM/SRIM, MCNPX and GEANT4 do not agreed with each other. A tentative to validate the codes against experimental data for thick absorbers bring some difficulties: only a few data is available and the existing data sets have been acquired at different initial proton energies, and for different absorber materials. In this work we compare the results of our Monte Carlo simulations with existing experimental data in terms of reduced calibration curve, i.e. the range - energy dependence normalized on the range scale by the full projected CSDA range for given initial proton energy in a given material, taken from the NIST PSTAR database, and on the final proton energy scale - by the given initial energy of protons. This approach is almost energy and material independent. The results of our analysis are important for pCT development because the contradictions observed at arbitrary low initial proton energies could be easily scaled now to typical pCT energies. © 2010 American Institute of Physics.

Comparison of the GEANT4 releases 8.2 and 9.2 in terms of a pCT reduced calibration curve

The GEANT4 simulations are essential for the development of medical tomography with proton beams pCT. In the case of thin absorbers the latest releases of GEANT4 generate very similar final spectra which agree well with the results of other popular Monte Carlo codes like TRIM/SRIM, or MCNPX. For thick absorbers, however, the disagreements became evident. In a part, these disagreements are due to the known contradictions in the NIST PSTAR and SRIM reference data. Therefore, it is interesting to compare the GEANT4 results with each other, with experiment, and with diverse code results in a reduced form, which is free from this kind of doubts. In this work such comparison is done within the Reduced Calibration Curve concept elaborated for the proton beam tomography. © 2010 IEEE.

Biofertilizante bovino, cobertura morta e revestimento lateral dos sulcos na produção de pimentão

The adoption of management practices that reduce water losses is essential to conserve moisture and improve soil temperature, especially in arid and semiarid environments of the Brazilian Northeast, characterized by high evapotranspiration and the adoption of irrigation with saline water, which harms growth and yield of commercial crops. Given these factories, an experiment was conducted in Nova Floresta, Paraiba, from August 2010 to February 2011 in Oxisoil, in order to evaluate the production of bell pepper and soil moisture in grooves with side trim, and application of biofertilizer and mulch cattle. The experimental design was randomized blocks with four replications using a factorial 2 x 2 x 2 for the ground beef with and without biofertilizer, with and without residues of sisal fiber (Agave sisalana), with and without the side facing the grooves, to reduce lateral water losses by infiltration of water with polyethylene plastic film. From the results, the lining of the lateral grooves provided higher values of soil moisture, number of fruits, fruit mass, plant production and productivity, bell pepper plants. It was also found that the combination of biofertilizer and mulch the ground beef remained wetter in the first 15 cm depth.

Caracterização metamórfica do Greenstone Belt de Guarinos - GO

The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)

Dietary fiber as fat substitute in emulsified and cooked meat model system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O CAD 3D aplicado na validação de protótipos na indústria do vestuário

Pós-graduação em Design - FAAC

Estratégias construtivas para a configuração do produto de moda

This article approaches possibilities and strategies of building to development of fashion product. It investigates the application of different constructive resources of textile materials of same composition and trim, establishing for this parameters of formal similarity. The conception of products process is conducted by three-dimensional expression, which allows the steps for creating and delivering happen simultaneously. Three-dimensional modeling techniques enable the buildings that are structured by the following features investigated: intervention in the textile surface, insertion of independent elements, and different confection resolutions. The results instigate reflection about the processes involved.