Genetic differentiation among ten populations of the genus Neoplecostomus (Teleostei: Loricariidae) from the upper Parana River basin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Glucose metabolism in the erythrocytes of the buffalo (Bubalus bubalis)

(CO2)-C-14 production from [1-C-14] glucose, the rate of glycolysis measured by the value of lactate production and the activities of various enzymes were determined in buffalo erythrocytes. Buffalo red cell glycolytic metabolites were estimated and used for the calculation of the mass action ratios of reactions catalyzed by the glycolytic enzymes of Bubalus bubalis. A comparison of the values of the mass action ratios with the equilibrium constants of the various glycolytic reactions indicate that hexokinase, phosphofructokinase, phosphoglycerate kinase and pyruvate kinase reactions are displaced from equilibrium, suggesting a regulatory role for each of these enzymes in buffalo erythrocyte glycolysis. (C) 1997 Elsevier B.V.

Influence of the hybrid layer thickness and resin tag length on microtensile bond strength.

The purpose of this study was to evaluate the correlation between the hybrid layer thickness/resin tag length and the microtensile bond strength of conventional two-step adhesive system, when applied to healthy dentinal tissue. After performing the restorative adhesive procedures and tooth extractions, ten specimens were sectioned in the mesiodistal direction. One section was used for microscopic analysis of the resin tag lengths and the hybrid layer thickness, while the other was used for the microtensile bond strength test (0.5 mm/min). The fractured surface was classified according to the fracture pattern, under a stereoscopic microscope at 40x magnification. Data obtained were submitted to analysis using one-way ANOVA and Pearson's Correlation test (alpha=0.05). The means corresponding to the hybrid layer thickness, resin tag lengths and the microtensile test were 2.68 microm, 6.43 microm and 16.23 MPa, respectively. There was no correlation between the means of the values obtained for the microtensile test, and those presented by the hybrid layer (r2=0.40, p>0.05) and resin tags (r2=0.21, p>0.05). The microtensile bond strength of the conventional two-step adhesive system Adper Single Bond 2 did not depend on the thickness of the hybrid layer and length of resin tags.

Sexual development, size at maturity, size at maternity and fecundity of the blue shark Prionace glauca (Linnaeus, 1758) in the Southwest Atlantic

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A study of the errors of the averaged models in the restricted three-body problem in a short time scale

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Agelotoxin: a phospholipase A(2) from the venom of the neotropical social wasp cassununga (Agelaia pallipes pallipes) (Hymenoptera-Vespidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Homogeneity of the geochemical reference material BRP-1 (paranábasin basalt) and assessment of minimum mass

Reference materials (RM) are required for quantitative analyses and their successful use is associated with the degree of homogeneity, and the traceability and confidence limits of the values established by characterisation. During the production of a RM, the chemical characterisation can only commence after it has been demonstrated that the material has the required level of homogeneity. Here we describe the preparation of BRP-1, a proposed geochemical reference material, and the results of the tests to evaluate its degree of homogeneity between and within bottles. BRP-1 is the first of two geochemical RM being produced by Brazilian institutions in collaboration with the United States Geological Survey (USGS) and the International Association of Geoanalysts (IAG). Two test portions of twenty bottles of BRP-1 were analysed by wavelength dispersive-XRF spectrometry and major, minor and eighteen trace elements were determined. The results show that for most of the investigated elements, the units of BRP-1 were homogeneous at conditions approximately three times more rigorous than those strived for by the test of sufficient homogeneity. Furthermore, the within bottle homogeneity of BRP-1 was evaluated using small beam (1 mm(2)) synchrotron radiation XRF spectrometry and, for comparison, the USGS reference materials BCR-2 and GSP-2 were also evaluated. From our data, it has been possible to assign representative minimum masses for some major constituents (1 mg) and for some trace elements (1-13 mg), except Zr in GSP-2, for which test portions of 74 mg are recommended.

Influence of the elevation of the left ventricular diastolic pressure on the values of the first temporal derivative of the ventricular pressure (dP/dt)

PURPOSE: To assess the effects of the elevation of the left ventricular end-diastolic pressure (LVEDP) on the value of the 1st temporal derivative of the ventricular pressure (dP/dt). METHODS: Nineteen anesthetized dogs were studied. The dogs were mechanically ventilated and underwent thoracotomy with parasympathetic nervous system block. The LVEDP was controlled with the use of a perfusion circuit connected to the left atrium and adjusted to the height of a reservoir. The elevation of the LVEDP was achieved by a sudden increase in the height of a reservoir filled with blood. Continuous recordings of the electrocardiogram, the aortic and ventricular pressures and the dP/dt were performed. RESULTS: Elevation of the LVEDP did not result in any variation of the heart rate (167±16.0bpm, before the procedure; 167±15.5bpm, after the procedure). All the other variables assessed, including systolic blood pressure (128±18.3mmHg and 150±21.5mmHg), diastolic blood pressure (98±16.9mmHg and 115±19.8mmHg), LVEDP (5.5±2.49 and 9.3±3.60mmHg), and dP/dt (4,855 ± 1,082 mmHg/s and 5,149±1,242mmHg/s) showed significant increases following the expansion of the ventricular cavity. Although the elevation of the dP/dt was statistically significant, 6 dogs curiously showed a decrease in the values of dP/dt. CONCLUSION: Sudden elevation of the LVEDP resulted in increased values of dP/dt; however, in some dogs, this response was not uniform.

Determination and padronization of normal values of bone mineral density (BMD) of the acessory carpus bone in young Thoroughbred horse using optical densitometry in radiographic image

Em 12 fêmeas e 12 machos da raça Puro Sangue Inglês com idade média de 12 meses, avaliou-se os valores normais da densidade mineral óssea do carpo acessório em milímetros de alumínio (mmAl) até o momento do fechamento completo da epífise distal do rádio, por meio do método de densitometria óptica em imagens radiográficas. A avaliação foi realizada por meio de um programa computacional (software) especialmente desenvolvido para medida de densidade óptica em filmes de raios-X, o qual contém a imagem radiográfica do osso carpo acessório, região de partes moles adjacente ao carpo acessório e os degraus de uma escala de alumínio (phatom), que permitiu a medida de densidade mineral óssea, sendo esta a média aritmética da região de interesse determinada no osso carpo acessório correspondente ao valor em milímetros da escala. Os valores da densidade mineral óssea em mmAl do acessório do carpo em função da idade não apresentaram diferenças entre os sexos (p=0,86) permitindo que uma equação de reta fosse ajustada para ambos os sexos (densidade mineral óssea (DMO) mmAl = 3.109 + 0,056 x idade em meses), na faixa etária estudada.

Reduction of the nutritional values of diets for hens through supplementation with phytase

Objetivou-se avaliar os efeitos da redução dos níveis nutricionais de dietas para poedeiras marrons em pico de postura sobre o desempenho das aves, a qualidade dos ovos e os parâmetros ósseos. No total foram avaliadas oito dietas, cada uma com cinco repetições de oito aves: 1. controle: formulada para suprir as exigências das aves; 2) controle + 0,03% ou 600 FTU; 3) 15% PB; 2.800 kcal de EM; 3,8% Ca e 0,28% Pd; 4) dieta 3 + 0,03% ou 600 FTU; 5) 14% PB; 2.750 kcal de EM; 3,4% Ca e 0,23% Pd; 6) dieta 5 + 0,03% ou 600 FTU; 7) 13% PB; 2.700 kcal de EM; 3,0% Ca e 0,18% Pd; e 8) dieta 7 + 0,03% ou 600 FTU. A redução dos níveis nutricionais prejudicou o desempenho das aves, principalmente a produção e massa de ovos, que melhorou com a inclusão de fitase nas dietas. Os parâmetros de qualidade dos ovos, no entanto, não se alteraram com a redução até o nível de 15% de PB; 2.800 kcal de EM/kg; 3,80% Ca e 0,280% Pd, o que não se repetiu nos níveis com menor densidade nutricional. Não houve efeito da redução dos níveis nutricionais sobre os parâmetros ósseos avaliados, exceto a resistência, que melhorou com a suplementação de fitase no nível de 600 FTU. A redução nos níveis nutricionais da dieta para 15% de PB, 2.800 kcal/kg de EM, 3,8% de Ca e 0,280% de Pd com a adição de 600 FTU não prejudica a produção nem a massa de ovos e melhora a saúde óssea das aves.

Larval development of the giant river prawn Macrobrachium rosenbergii at different ammonia concentrations and pH values

The effect of ammonia and pH levels on giant river prawn Macrobrachium rosenbergii larvae were evaluated to provide science-based information on safe levels of ammonia and pH for larviculture. Survival rate, developmental stage, and larval weight gain were determined for larvae kept in water with total ammonia (NH4-N) concentrations of 0, 1, 2, 4, and 8 mg\L and pH 7, 8, and 9. The trials were conducted in two phases: phase 1, larvae from stages I through VIII and phase 2, larvae from stage VIII until metamorphose. Oxygen consumption was determined for larvae in stages I and VIII at total ammonia concentrations of 0, 4, and 8 mg/L and pH 8. Survival rate up to stage VIII varied from 86 to 98% and did not differ for total ammonia concentrations in pH 7 and 8 and for 0 mg/L NH4-N in pH 9. Survival rate was significantly lower (0-20%) for total ammonia concentrations from 1 to 8 mg/L (0.43-3.41 mg/L of unionized ammonia) in pH 9. Larval stage indexes (7.9-8.0 range) and weight gain (1.572-2.931 mg range) of larvae at the end of phase 1 of the experiment did not differ for the different ammonia concentration solutions, but were significantly lower in pH 9. In phase 2, no parameter differed among treatments for pH 7 and 8; however there was total mortality at pH 9 until 96h. Respiration rates diminished when larvae were exposed to total ammonia concentrations of 4 and 8 mg/L (0.28 and 0.55 mg/L of unionized ammonia), but development remained unaltered. Therefore, M. rosenbergii larvae tolerate high levels of total ammonia, while toxicity depends primarily on unionized ammonia concentrations. In addition, alkaline pH (9) acted directly on the larvae, curbing development and causing severe mortality. Larval tolerance to high ammonia and pH levels decreases for the last zoeal stages. © Copyright by the World Aquaculture Society 2005.

Estimation of variance components and prediction of breeding values in rubber tree breeding using the REML/BLUP procedure

The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.

Influence of the degradation on the stress cracking values of high density polyethylene (HDPE) geomembranes after different exposures

This paper presents results from stress cracking (SC) tests performed in both fresh and exposed high density polyethylene (HDPE) geomembranes (GM). The HDPE GMs were exposed to ultraviolet radiation, thermal aging (air oven) and tested for chemical compatibility with sodium hydroxide. Stress cracking tests in both fresh and degraded samples were performed in accordance to ASTM D5397: Notched Constant Tensile Load Test (NCTL) and Single Point-Notched Constant Tensile Load Test (SP-NCTL). The results of the NCTL showed that the geomembrane degradation process can be considered to be a catalyst for the phenomenon of SC because it caused a 50% to 60% reduction in stress crack resistance. The most resistance reduction was observed for the sample under chemical compatibility with sodium hydroxide. For the SP-NCTL, the results showed that the samples maintain the same trend verified in the NCTL. The largest resistance reduction was evidenced in samples undergoing ultraviolet degradation. © 2012 ejge.

Interference of the assessment method in pH values of an epoxy-based cement

Introduction: Alkalinization potential is a fundamental property of endodontic epoxy-based cements containing calcium hydroxide. Studies have shown discrepant pH results for same materials at different evaluation periods. A possible reason accounting for these differences may be the assessment procedures. Objective: To evaluate the pH value of an epoxy-based cement (Sealer 26) in different periods of analysis, using two assessment methods. Material and methods: Sealer 26 was manipulated and immediately placed into polyethylene tubes (n=10, each group) and immersed in distilled water. In G1, the tubes were kept in the same water during all experiment; and in G2, the tubes were removed and placed into another flask with an equal amount of water after the pH evaluation. The pH of these solutions was measured at 24 hours, 7, 14 and 28 days. Analysis were made within the same group according to the experimental periods and between groups in each experimental period. Data were submitted to ANOVA (α = 5%) and t test, respectively. Results: For G1 and G2, all periods showed different pH values (p < 0.05), except between 14 and 28 days (p > 0.05) and between 7 and 14 days (p > 0.05), respectively. In each period, no significant differences were observed between the groups. Conclusion: The method to obtain the pH values in different experimental periods no interfered in the final results. However, difference was observed when the results were analyzed at same group.