Visitantes florais de Lagerstroemia speciosa Pers: (Lythraceae)

Studies were carried out with Lagerstroemia speciosa Pers. on floral reproductive systems, diversity and constancy of visiting insects at different hours of day, the behaviour of these insects at the flowers and the influence of these environmental factors in relation to their visits. The fenology, anthesis and others particularity of this vegetal species was studied. A great diversity of insects was verified visiting the flowers with the predominance of bees. The most frequent and constant species encountered were: Nannotrigona testaceicornis (Lepeletier, 1836) (40,2%), Tetragonisca angustula (Latreille, 1811) (16,9%), Apis mellifera Linnaeus, 1758 (11,8%), Plebeia droryana (Friese, 1900) (9,1 %) e Exomalopsis fulvofasciata (Smith, 1879) (8,5%). The blossoms possessis features of melittophily syndrome and diurnal anthesis. The environmental factors influence the insects foraging activity, mainly temperature, light, time of day, humidity and wind speed. The effective pollinators were the large insects like Bombus morio (Swederus, 1787), Bombus atratus (Franklin, 1913), Centris tarsata (Smith, 1874), Centris flavifrons Fabricius, 1775, Xylocopa suspecta Camargo & Moure, 1988, Xylocopa frontalis (Olivier, 1789) and Eulaema nigrita Lepeletier, 1841.

Visitantes florais de Erythrina speciosa Andr. (Leguminosae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlation of Atopobium vaginae Amount With Bacterial Vaginosis Markers

Objective. The purpose of this study was to test the correlation of the amount of Atopobium vaginae with the most commonly used markers for bacterial vaginosis (BV).Materials and Methods. We enrolled 103 nonpregnant and premenopausal women that were positive for BV by Amsel criteria and with a Nugent score higher than 3. All women were negative for yeast, Chlamydia trachomatis, Trichomonas vaginalis, and Neisseria gonorrhoeae. A. vaginae concentration was determined by quantitative polymerase chain reaction from samples of vaginal rinsings with 2 mL of sterile saline.Results. There was no difference in the median values of A. vaginae concentration when comparing samples with presence or absence of each individual Amsel criterion. In the case of a higher pH cutoff value of 4.9, greater amounts of this microorganism (p = .02) were found. In addition, correlation tests showed that A. vaginae concentration is positively correlated with pH (p < .001) and with Nugent scores (p = .003).Conclusions. The quantification of A. vaginae is useful for identification of the most severe cases of BV.

Entomofauna visitante de Belamcanda chinensis (L.) DC (Iridaceae) durante o período de floração

A study of the reproductive biology of B. chinensis (L.) DC. (Iridaceae) was realized comprising floral biology and breeding systems. The floral biology studies included analyses of nectar production, occurence of osmophores, corolla pigments, ultraviolet reflexion and absortion patterns, viability of pollen, pollinators and flower visitors. The breeding systems were studied taking into account the results of manual pollinators tests. B. chinensis is self-compatible bul cross-pollination is more frequent. The effective pollinators are Plebeia droryana (Friese, 1906) (45,7%), Trigona spinipes (Fabricius, 1793) (27,3%), Tetragonisca angustula (Latreille, 1811) (9,3%). Others insects visitors are considered nectar and pollen thieves. The flowering begins generally in January and February. The complete reproductive cicle, as here considered, begining with floral bud production ending with development of mature fruits, lasts January to June. Seed dispersion is ornitocoric.

Developing a system for down-hole seismic testing together with the CPTU

This paper presents a system for performing down-hole seismic test together with the piezocone test in order to determine the shear wave velocity (Vs) and for calculating the maximum shear modulus (Go); a basic parameter for analyzing the dynamic soil behavior and a reference value of the soil stiffness. The system components are described and tests results for checking the geophone response are also presented, both before and after installation into the probe. The system was used in down-hole tests carried out at three experimental research sites located in the interior of Sao Paulo State, Brazil, where in situ seismic test results are available. The Vs values measured in down-hole tests carried out with this system were consistent with those determined in cross-hole tests and with a commercial seismic piezocone, which enabled to validate the developed system.

Alveolar bony crest preservation at implants installed immediately after tooth extraction: An experimental study in the dog

Aim: To evaluate the influence of deproteinized bovine bone mineral in conjunction with a collagen membrane, at implants installed into sockets in a lingual position immediately after tooth extraction, and presenting initial horizontal residual buccal defects <2 mm. Material and methods: The pulp tissue of the mesial roots of 4P4 was removed in six Labrador dogs, and the root canals were filled with gutta-percha and cement. Flaps were elevated, and the buccal and lingual alveolar bony plates were exposed. The premolars were hemi-sectioned, and the distal roots were removed. Implants were installed in a lingual position and with the margin flush with the buccal bony crest. After installation, defects resulted at about 1.7 mm in width at the buccal aspects, both at the test and control sites. Only in the left site (test), deproteinized bovine bone mineral (DBBM) particles were placed into the defect concomitantly with the placement of a collagen membrane. A non-submerged healing was allowed. Results: After 3 months of healing, one implant was found not integrated and was excluded from the analysis together with the contralateral control implant. All remaining implants were integrated into mature bone. The bony crest was located at the same level of the implant shoulder, both at the test and control sites. At the buccal aspect, the most coronal bone-to-implant contact was located at a similar distance from the implant margin at the test (1.7 ± 1.0 mm) and control (1.6 ± 0.8 mm) sites, respectively. Only small residual DBBM particles were found at the test sites. Conclusion: The placement of an implant in a lingual position into a socket immediately after tooth extraction may favor a low exposure of the buccal implant surface. The use of DBBM particles, concomitantly with a collagen membrane, did not additionally improve the outcome obtained at the control sites. © 2011 John Wiley & Sons A/S.

Healing outcomes at implants installed in sites augmented with particulate autologous bone and xenografts. An experimental study in dogs

Aim: To evaluate the integration of implants installed at the interface of pristine and grafted tissue augmented with particulate autologous bone or deproteinized bovine bone mineral (DBBM), concomitantly with a collagen membrane. Material and methods: In 6 Labrador dogs, the distal root of 3P3 and 4P4 was endodontically treated and hemi-sected, and the mesial roots extracted concomitantly with the extraction of 2P2. The buccal bony walls were removed, and two box-shaped defects, one larger and one smaller, were created. After 3 months, flaps were elevated, and the defects were filled with particulate autologous bone or DBBM in the right and left side of the mandible, respectively. Collagen membranes were used to cover the grafted areas. Three months later, flaps were elevated, and a customized device was used as surgical guide to prepare the recipient sites at the interface between grafts and pristine bone. One implant was installed in each of the four defects. After 3 months, biopsies were harvested and ground sections prepared for histological evaluation. Results: The augmentation technique was effective at all sites and all the foreseen implants were installed. In the histological analysis, all implants were integrated in mature bone, at both the buccal and lingual aspects. The most coronal bone-to-implant contact and the top of the buccal bony crest were located at a similar distance between test and control implants. However, these distances were higher at the larger compared with the smaller defects. Especially in the large defect, residual particles of DBBM were found embedded into connective tissue and located outside the bony crest. Conclusions: Particulate autologous bone as well as DBBM particles used to augment horizontally the alveolar bony process allowed for the osseointegration of implants installed after 3 months of healing. © 2012 John Wiley & Sons A/S.

Pró-letramento: experiências pedagógicas em matemática e linguagem

Pós-graduação em Educação para a Ciência - FC

Immediate loading of implants installed in a healed alveolar bony ridge or immediately after tooth extraction: an experimental study in dogs

ObjectiveTo compare the sequential healing at immediately loaded implants installed in a healed alveolar bony ridge or immediately after tooth extraction.Material and methodsIn the mandible of 12 dogs, the second premolars were extracted. After 3months, the mesial roots of the third premolars were endodontically treated and the distal roots extracted. Implants were placed immediately into the extraction sockets (test) and in the second premolar region (control). Crowns were applied at the second and third maxillary premolars, and healing abutments of appropriate length were applied at both implants placed in the mandible and adapted to allow occlusal contacts with the crowns in the maxilla. The time of surgery and time of sacrifices were planned in such a way to obtain biopsies representing the healing after 1 and 2weeks and 1 and 3months. Ground sections were prepared for histological analyses.ResultsAt the control sites, a resorption of the buccal bone of 1mm was found after 1week and remained stable thereafter. At the test sites, the resorption was 0.4mm at 1-week period and further loss was observed after 1month. The height of the peri-implant soft tissue was 3.8mm both at test and control sites. Higher values of mineralized bone-to-implant contact and bone density were seen at the controls compared with the test sites. The differences, however, were not statistically significant.ConclusionsDifferent patterns of sequential early healing were found at implants installed in healed alveolar bone or in alveolar sockets immediately after tooth extractions. However, three months after implant installation, no statistically significant differences were found for the hard- and soft-tissue dimensions.