Ecological distribution of the shrimp Nematopalaemon schmitti (Crustacea: Decapoda: Caridea) in three bays on the south-eastern coast of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects evaluation of remaining resin removal (three modes) on enamel surface after bracket debonding

Introduction: An appropriate selection of instruments is essential to perform a correct debonding technique, by properly removing orthodontic brackets and the remaining resin. Objective: The aim of this study was to evaluate three methods of remaining resin removal on enamel surface after bracket debonding, by means of Scanning Electron Microscopy (SEM). Methods: Eighteen bovine incisors were selected and divided into three groups (A, B and C) of six teeth each. Before bracket bonding, epoxy resin casts were obtained by impression of the teeth with addition silicon, in order to register baseline enamel characteristics and representing the control group. The methods for remaining resin removal were: Group A - gross and medium granulation Soflex discs; Group B - carbide bur in low-speed; Group C - carbide bur in high-speed. Soflex polishing system fine and ultrafine granulation discs were used for Group A, rubber tips for Groups B and C, and polishing paste for all groups. After polishing, impression of teeth were taken and casts were analyzed by means of SEM. The baseline enamel characteristics (Control Group) were compared to the final aspect of enamel to determine the method that generated less enamel abrasion. Results and Conclusion: The remaining resin removal by carbide bur in low-rotation, and enamel polished with rubber tips followed by polishing paste produced the smaller damage to the enamel.

Ecological distribution of the prawn Nematopalaemon schmitii (Crustacea: Decapoda: Caridea) in three bays on the southeastern coat of Brazil

The relationships between the spatial and temporal variations in the abundance of the shrimp Nematopalaemon schmitti and water temperature, salinity, and texture and organic-matter content of the sediment, were analysed in Ubatumirim, Ubatuba and Mar Virado bays on the northern coast of São Paulo, Brazil. Sampling was carried out monthly, from January 1998 through December 1999, from a shrimp boat equipped with double-rig nets, along six transects in each bay. In total, 2 116 specimens of N. schmitti were caught. Their distribution differed among bays, transects and seasons (ANOVA, p < 0.05). Highest total abundance was found in areas of high organicmatter content, in substrate composed mainly of very fine sand and silt and clay, and during winter and autumn. Although multiple regression analysis showed no significant relationship (p > 0.05), observations suggest that water tempera ture, sediment texture, organic-matter content, and the presence of biodetritus and plant fragments, provided favourable environmental conditions for the establishment of N. schmitti in the region.

Effects of meal size and proximal-distal segmentation on gastric activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chromosome evolution in three Brazilian Leptodactylus species (Anura, Leptodactylidae), with phylogenetic considerations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reduction of diameter of the left ventricle of dogs by plication of the left ventricular free wall

Objective - To determine effects of reducing the diameter of the left ventricle of dogs by plication of the left ventricular free wall. Animals - 8 healthy adult mixed-breed dogs. Procedure - Left lateral thoracotomy and a T-shaped pericardiotomy were performed. The free wall of the left ventricle was imbricated with 3 interrupted transfixing sutures applied in a horizontal mattress pattern, using 3-0 polypropylene suture assembled on a straight cutting needle. Surgeons were careful to avoid the coronary vessels. Echocardiography was performed 24 hours before and 48 hours after surgery. Electrocardiography was performed before and 1, 2, 7, 15, 21, 30, and 60 days after surgery. Results - Echocardiographic measurements revealed that the diameter of the left ventricle was reduced by a mean of 23.5%. Electrocardiography revealed ventricular premature complexes 24 hours after surgery that regressed without treatment during the first week after surgery. Conclusions and Clinical Relevance - Plication of the left ventricular free wall of dogs can reduce end-diastolic and end-systolic dimensions of the left ventricle. The technique is simple and does not require cardiopulmonary bypass. According to Laplace's law, the reduction of cardiac diameter leads to reduction on free-wall tension and may improve left ventricular function in dilatated hearts. Thus, additional studies involving dogs with dilated cardiomyopathy should be conducted.

Effect of the number of screws on the stability of locking mandibular reconstruction plates

Atrophic mandible fractures are frequently a challenge to stabilize. This study evaluated, through mechanical testing in vitro, the number of locking screws that is sufficient to withstand loading when applied with a locking reconstruction plate in the fixation of atrophic mandible fractures. Polyurethane mandibles with a simulated linear fracture at the midline were used as substratum. Results show that resistance of the fixation is poor when one and two screws are used on each side of the fracture. Three screws on each side of the fracture significantly increases the resistance to displacement. However, no additional strength is added to the construct when more than three screws per side are used. © 2013 International Association of Oral and Maxillofacial Surgeons.

Avaliação de um biorreator rotativo para fermentação em estado sólido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison of shear bond strength of orthodontics brackets on composite resin restorations with different surface treatments

INTRODUÇÃO: frequentemente, os pacientes ortodônticos apresentam restaurações de resina composta; no entanto, existem poucos estudos que avaliam a melhor forma de colagem ortodôntica nessa situação. OBJETIVO: o objetivo do presente trabalho foi avaliar a força adesiva de braquetes ortodônticos em restaurações resinosas com tratamento de superfície. MÉTODOS: foram utilizados 51 incisivos inferiores bovinos divididos aleatoriamente em três grupos. No grupo controle (GC), os braquetes foram colados em esmalte dentário; nos grupos experimentais com tratamento (GCT) e sem tratamento (GST), os braquetes foram colados em restauração de resina previamente realizada, diferenciando-se pelo tratamento de superfície com broca diamantada. Os dentes foram incluídos em tubos de PVC com resina acrílica autopolimerizável. O ensaio de cisalhamento foi executado em máquina universal de ensaios Emic. Os grupos foram submetidos à ANOVA com pós-teste de Tukey para verificação da diferença estatística entre os grupos (α = 0,05). RESULTADOS: GC (6,62MPa) e GCT (6,82MPa) apresentaram resultados semelhantes, enquanto o GST (5,07MPa) obteve resultados estatisticamente menores (p < 0,05). CONCLUSÃO: conclui-se que a melhor técnica de colagem de braquetes ortodônticos em restaurações de resina composta é a de realização de desgaste sobre a superfície.

EGHEP-ISFG collaborative exercise on mixture profiles of autosomal STRs (GHEP-MIX01, GHEP-MIX02 and GHEP-MIX03): Results and evaluation

One of the main objectives of the Spanish and Portuguese-Speaking Group of the International Society for Forensic Genetics (GHEP-ISFG) is to promote and contribute to the development and dissemination of scientific knowledge in the area of forensic genetics. Due to this fact, GHEP-ISFG holds different working commissions that are set up to develop activities in scientific aspects of general interest. One of them, the Mixture Commission of GHEP-ISFG, has organized annually, since 2009, a collaborative exercise on analysis and interpretation of autosomal short tandem repeat (STR) mixture profiles. Until now, three exercises have been organized (GHEP-MIX01, GHEP-MIX02 and GHEP-MIX03), with 32, 24 and 17 participant laboratories respectively. The exercise aims to give a general vision by addressing, through the proposal of mock cases, aspects related to the edition of mixture profiles and the statistical treatment. The main conclusions obtained from these exercises may be summarized as follows. Firstly, the data show an increased tendency of the laboratories toward validation of DNA mixture profiles analysis following international recommendations (ISO/IEC 17025: 2005). Secondly, the majority of discrepancies are mainly encountered in stutters positions (53.4%, 96.0% and 74.9%, respectively for the three editions). On the other hand, the results submitted reveal the importance of performing duplicate analysis by using different kits in order to reduce errors as much as possible. Regarding the statistical aspect (GHEP-MIX02 and 03), all participants employed the likelihood ratio (LR) parameter to evaluate the statistical compatibility and the formulas employed were quite similar. When the hypotheses to evaluate the LR value were locked by the coordinators (GHEP-MIX02) the results revealed a minor number of discrepancies that were mainly due to clerical reasons. However, the GHEP-MIX03 exercise allowed the participants to freely come up with their own hypotheses to calculate the LR value. In this situation the laboratories reported several options to explain the mock cases proposed and therefore significant differences between the final LR values were obtained. Complete information concerning the background of the criminal case is a critical aspect in order to select the adequate hypotheses to calculate the LR value. Although this should be a task for the judicial court to decide, it is important for the expert to account for the different possibilities and scenarios, and also offer this expertise to the judge. In addition, continuing education in the analysis and interpretation of mixture DNA profiles may also be a priority for the vast majority of forensic laboratories. (C) 2014 Elsevier Ireland Ltd. All rights reserved.

Reproductive biology of Hepatus pudibundus (Crustacea: Brachyura), the most abundant crab on the southeastern Brazilian coast

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos de herbicidas nos teores de clorofilas de Spirodela punctata

Com o objetivo de verificar na planta aquática Spirodela punctata o efeito de diferentes concentrações (0,005; 0,05; 0,5 e 5 mgL-1 de ingrediente ativo) dos herbicidas butachlor, glyphosate e propanil sobre os teores de clorofila a, b e na razão clorofila a/b, foram conduzidos, por sete dias completos, bioensaios em sala climatizada. Determinou-se os teores de clorofilas através de leituras espectrofotométricas nas absorbâncias A645 e A663 nm. Os resultados mostraram que o butachlor diminuiu o teor de clorofila b, o glyphosate o teor de clorofila a, enquanto o propanil diminuiu os teores de clorofila a, b e a razão a/b, provocando a maior redução de pigmentos na espécie.

Comportamento de adesão da madeira de um híbrido clonal de Eucalyptus urophylla x Eucalyptus grandis proveniente de três condições de manejo

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Hipertensão arterial experimental e prenhez em ratas: repercussões no peso da placenta e no índice placentário

Objetivo: estudar as repercussões da hipertensão sobre o peso da placenta e índice placentário. Métodos: foram utilizadas 82 ratas virgens da linhagem Wistar em idade de reprodução. Após a indução da hipertensão arterial experimental (Modelo Goldblatt I -- 1 rim-1 clipe) as ratas foram sorteadas para compor os 4 grandes grupos experimentais (controle, manipulação, nefrectomia e hipertensão). A seguir, as ratas foram distribuídas por sorteio em 8 subgrupos, sendo quatro prenhes (P) e quatro não-prenhes. Após acasalamento, dos quatro grupos prenhes obtivemos com o nascimento dos recém-nascidos (RN) os seguintes grupos: RN-C, RN-M, RN-N e RN-H, respectivamente, controle, manipulação, nefrectomizado e hipertenso. Resultados: quanto ao peso da placenta, o do grupo RN-C foi estatisticamente maior que o de todos os demais grupos. Por outro lado, verifica-se que o peso das placentas provenientes do grupo RN-M foi maior que o dos grupos RN-N e RN-H, os quais não diferiram entre si. Os índices placentários dos grupos P-C (Md = 0,1085) e P-M (Md = 0,1110) não diferiram entre si, mas foram menores que os dos grupos P-N (Md = 0,1175) e P-H (Md = 0,1211), os quais também não diferiram entre si. Conclusões: a hipertensão e a nefrectomia unilateral determinaram redução do peso das placentas e aumento do índice placentário, evidenciando repercussões no desenvolvimento placentário e fetal.

Which kind of miniplate to use in mandibular sagittal split osteotomy? An in vitro study

This study verified the resistance to displacement of six miniplate fixation methods after sagittal split osteotomy (SSO). SSO was performed in 30 polyurethane synthetic mandible replicas. The distal segments were advanced (4 mm) and specimens were grouped according to the fixation method: four-hole standard miniplate; four-hole locking miniplate; six-hole standard miniplate; six-hole locking miniplate; six-hole standard sagittal miniplate; six-hole locking sagittal miniplate. Biomechanical evaluation was performed by applying compression loads to three points on the second molar region, using an Instron universal testing machine until a 3 mm displacement of the segments occurred. Compression loads able to produce 3 mm displacement were recorded in kN and subjected to analysis of variance (P < 0.01) and Tukey's tests for comparison between groups (P < 0.05). The locking sagittal miniplate showed higher resistance to displacement than the regular four- and six-hole locking and standard miniplates. No significant differences were observed between the locking sagittal miniplate and the regular sagittal or the four-hole locking miniplates. Two of the three groups with the best results had locking plate fixation methods. Fixation of SSO with a single miniplate is better accomplished using six-hole locking sagittal miniplates, six-hole standard sagittal miniplates, or four-hole locking miniplates; these methods are more resistant to displacement.