Aspectos históricos e implicações da utilização do efeito 3D no cinema: o caso de A invenção de Hugo Cabret

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Luz e sombra, mostrar e esconder: os efeitos de sentido e as estratégias da imagem fotográfica em magnum in motion

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Intra-articular pressure profiles of the cadaveric equine fetlock joint in motion

The study of the influence of motion and initial intra-articular pressure (IAP) on intra-articular pressure profiles in equine cadaver metatarsophalangeal (MTP) joints was undertaken as a prelude to in vivo studies, Eleven equine cadaver MTP joints were submitted to 2 motion frequencies of 5 and 10 cycles/min of flexion and extension, simulating the condition of lower and higher (double) rates of passive motion. These frequencies were applied and pressure profiles generated with initial normal intra-articular pressure (-5 mmHg) and subsequently 30 mmHg intra-articular pressure obtained by injection of previously harvested synovial fluid.The 4 trials performed were 1) normal IAP; 5 cyles/min; 2) normal IAP; 10 cycles/min; 3) IAP at 30 mmHg; 5 cycles/min and 4) IAP at 30 mmHg; 10 cycles/min. The range of joint motion applied (mean +/- s.e.) was 67.6 +/- 1.61 degrees with an excursion from 12.2 +/- 1.2 degrees in extension to 56.2 +/- 2.6 degrees in flexion, Mean pressure recorded in mmHg for the first and last min of each trial, respectively, were 1) -5.7 +/- 0.9 and -6.3 +/- 1.1; 2) -5.3 +/- 1.1 and -6.2 +/- 1.1; 3) 58.8 +/- 8.0 and 42.3 +/- 7.2; 4) 56.6 +/- 3.7 and 40.3 +/- 4.6. Statistical analyses showed a trend for difference between the values for the first and last minute in trial 3 (0.05>P<0.1) with P = 0.1 and significant difference (P = 0.02) between the mean IAP of the first and last min in trial 4. The loss of intra-articular pressure associated with time and motion was 10.5, 16.9, 28.1 and 28.9% for trials 1-4, respectively. As initial intraarticular pressure and motion increased, the percent loss of intra-articular pressure increased.The angle of lowest pressure was 12.2 +/- 1.2 (mean +/- s.e.) in extension in trials 1 and 2, In trials 3 and 4, the lowest pressures were obtained in flexion with the joints at 18.5 +/- 2.0 degrees (mean +/- s.e.). This demonstrated that the joint angle of least pressure changed as the initial intra-articular pressure changed and there would not be a single angle of least pressure for a given joint.The volume of synovial fluid recovered from the MTP joints in trial 3 compared to 4 (trials in which fluid was injected to attain IAP of 30 mmHg) was not significantly different, supporting a soft tissue compliance change as a cause for the significant loss of intra-articular pressure during the 15 min of trial 4.The pressure profiles generated correlate well with in vivo values and demonstrated consistent pressure profiles. Our conclusions are summarised as follows:1. Clinically normal equine MTP joints which were frozen and then later thawed were found to have mostly negative baseline intra-articular pressures, as would be expected in living subjects,2. Alternate pressure profiles of the dorsal and plantar pouch at baseline intra-articular pressure document the presence of pressure forces that would support 'back and forth' fluid movement between joint compartments. This should result in movement of joint fluid during motion, assisting in lubrication and nutrition of articular cartilage,3. If joint pressure was initially greater than normal (30 mmHg), as occurs in diseased equine MTP joints, joint motion further increased joint capsule relaxation (compliance) and, therefore, reduced intra-articular pressure.4. Peak intra-articular pressures reached extremely high values (often >100 mmHg) in flexion when initial pressure was 30 mmHg. Joint effusion pressures recorded for clinical MCP joints are frequently 30 mmHg. These IAP values are expected to produce intermittent synovial ischaemia in clinical cases during joint flexion.5, Additional in vivo studies are necessary to confirm our conclusions from this study and to identify the contributions of fluid absorption and the presence of ischaemia in a vascularised joint.

Actual Brazilian habitations in wood: A technology in development or a question of fashion?

Over the past few years there have significantly been increased the articles that approach the constructions in wood or with structure in wood in the specialized Brazilian magazines. This increase brings up indications that the incorporated values to these habitations are modifying, however it is not so simple to conclude that these issues can be associated to the development of incorporated technologies to the constructive system. The work presents, firstly, a survey performed in these publications that had the objective to verify which the constructive systems in wood is being more executed, under which cultural and technician standards. From that survey it was performed a study of the habitations constructed in mixing system whose structures are timbers and walls in masonry. The aesthetic and cultural questions involved are argued considering mainly that these habitations belong to a social class whose purchasing power increased.

Bio-safety technology in production of bovine herpesvirus type 5 (BoHV-5) using an alternative serum-free medium

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reproductive technology in domestic carnivorous

Background: The delay in development of artificial reproduction techniques on carnivorous could be due to countless reasons, but the lack of commercial interest is probably the most important one. The majority of canines are small structures, canidae are extremely fertile and a great number of species are adapted to domestication or captivity. Finally, the canine gamete physiology presents a difficult adaptation of technology knowledge obtained from other species. Furthermore, domestic felines are animals of company and there is no interest in reproducing them in a large scale, as it has been observed in other domestic animals, however, besides of being a valuable model for the development of in vitro techniques, the domestic cat is also used as an embryo receptor for different species of small wild felines due to physiological similarities among them, in vitro embrionary development, Review: It was reviewed the main insights about the reproductive physiology in female dogs, in vitro oocytary maturation (IVM), pregnancy and conception rate with dogs' frozen/unfrozen semen and PIV in domestic cats. The majority of mammal oocytes restart meiosis spontaneously after ovulation and reaches MII in artificial environment; in an in vitro maturation system in bovines, around 90% of oocytes complete their maturation, although its development capacity can be reduced subsequently. The success of IVM in canidae have been limited, with maturation rate varying from 0 to 58%, usually around 20%. The greatest difficulties include oocyte quality, hormonal environment, protein supplementation, cumulus / oocyte cell interaction, donor breed and age, culture systems, oxygen tension, amino acids, growth factor and sequential means. The freezing process reduces the quality of the semen, firstly because it reduces the number of living sperms and secondly because freezing produces cell modifications that could alter the sperm motility, longevity, integrity of membranes and its fertilizing capacity. Conclusion: Nowadays, several researches are being performed with the aim of increasing viability after dogs' and cats' semen is unfrozen, using extenders, cryoprotectors, freezing and unfreezing curves, addition of antioxidant substances. The aim of this text is to inform about the improvements obtained on the artificial reproduction techniques, emphasizing the oocytary maturation in female dogs, semen cryopreservation and artificial insemination in domestic dogs and cats.

Development of CAN-based distributed control system for variable rate technology in agricultural machinery

The number of electronic devices connected to agricultural machinery is increasing to support new agricultural practices tasks related to the Precision Agriculture such as spatial variability mapping and Variable Rate Technology (VRT). The Distributed Control System (DCS) is a suitable solution for decentralization of the data acquisition system and the Controller Area Network (CAN) is the major trend among the embedded communications protocols for agricultural machinery and vehicles. The application of soil correctives is a typical problem in Brazil. The efficiency of this correction process is highly dependent of the inputs way at soil and the occurrence of errors affects directly the agricultural yield. To handle this problem, this paper presents the development of a CAN-based distributed control system for a VRT system of soil corrective in agricultural machinery. The VRT system is composed by a tractor-implement that applies a desired rate of inputs according to the georeferenced prescription map of the farm field to support PA (Precision Agriculture). The performance evaluation of the CAN-based VRT system was done by experimental tests and analyzing the CAN messages transmitted in the operation of the entire system. The results of the control error according to the necessity of agricultural application allow conclude that the developed VRT system is suitable for the agricultural productions reaching an acceptable response time and application error. The CAN-Based DCS solution applied in the VRT system reduced the complexity of the control system, easing the installation and maintenance. The use of VRT system allowed applying only the required inputs, increasing the efficiency operation and minimizing the environmental impact.

Memória e historiografia no documentário: o fim e o princípio de Eduardo Coutinho

Pós-graduação em Ciências Sociais - FFC

Difference variance dispersion graphs for comparing response surface designs with applications in food technology

Variance dispersion graphs have become a popular tool in aiding the choice of a response surface design. Often differences in response from some particular point, such as the expected position of the optimum or standard operating conditions, are more important than the response itself. We describe two examples from food technology. In the first, an experiment was conducted to find the levels of three factors which optimized the yield of valuable products enzymatically synthesized from sugars and to discover how the yield changed as the levels of the factors were changed from the optimum. In the second example, an experiment was conducted on a mixing process for pastry dough to discover how three factors affected a number of properties of the pastry, with a view to using these factors to control the process. We introduce the difference variance dispersion graph (DVDG) to help in the choice of a design in these circumstances. The DVDG for blocked designs is developed and the examples are used to show how the DVDG can be used in practice. In both examples a design was chosen by using the DVDG, as well as other properties, and the experiments were conducted and produced results that were useful to the experimenters. In both cases the conclusions were drawn partly by comparing responses at different points on the response surface.

Grander system: A new technology to reduce surface tension of adhesive systems in dentistry

Background. Reduced surface tension of liquids results in higher surface wetting ability and diffusivity by the substrate. Objectives. The objective of this study was to evaluate the influence of the Grander Technology in reducing the surface tension of adhesive systems. Methods. Two adhesive systems (self-etch and total-etch) were modified by physical contact with the Grander system Flexible unit to revitalize water, for 48 h. Surface tension of adhesive systems and water in normal and grander-modified conditions was measured with a goniometer. Results. The results showed a reduction of surface tension for all conditions grander-modified between 3-15%. Conclusions. Grander Technology was effective in reducing the surface tension of the Single Bond and Clearfil SE Bond adhesive systems. Clinical significance. Grander technology was employed to restructure the molecular structure of water-based adhesive systems, which can increase their wetness capacity and therefore ensure a greater diffusibility.

A discursivização em Wall.E: sociedade, tecnologia e poder

This article consists in a discourse analysis of the feature film in animation Wall.e produced by Pixar in association to Disney in 2008. Pixar has been known to produce films that contain various discursive levels, making its products appealing not only for children, but also for adults. However, Wall-e proves to be a masterpiece in Pixar carrier, because it is the one which focuses on the analysis and critique of contemporary society associated with technological development. For this, the plot has as its starting point the question of sustainability and unbridled consumerism. But the film expands the debate, tracing the relationship between technology and humanity, discussing how one affects the other. The project therefore aims to show how the animation works such concepts and constructs his discourse. To this end, the work seeks to identify the signs that make up the discourse and draw the intertextuality between WALL.E and other works that also discuss the same elements such as Stanley Kubrick‟s 2001 - A Space Odyssey (1968)