15 resultados para Technical literature
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Maximum Power Point tracking (MPPT) in photovoltaic (PV) systems may be achieved by controlling either the voltage or current of the PV device. There is no consensus in the technical literature about how is the best choice. This paper provides a comparative analysis performance among current and voltage control using two different MPPT strategies: the perturb and observe (P&O) and the incremental conductance techniques. © 2011 IEEE.
Resumo:
Modal analysis is widely approached in the classic theory of power systems modelling. This technique is also applied to model multiconductor transmission lines and their self and mutual electrical parameters. However, this methodology has some particularities and inaccuracies for specific applications, which are not clearly described in the technical literature. This study provides a brief review on modal decoupling applied in transmission line digital models and thereafter a novel and simplified computational routine is proposed to overcome the possible errors embedded by the modal decoupling in the simulation/ modelling computational algorithm. © The Institution of Engineering and Technology 2013.
Resumo:
Introduction: Technical literature shows high frequencies of injuries occurring in classical ballet dancers; however, only limited information about the permanent effects of chronic diseases are mentioned. Objective: To compare the presence of MSD among dancers who wear pointe shoes and those who do not. Methods: The research was conducted at the 27th Festival of Joinville in Santa Catarina. The study had the participation of 111 dancers, 88 of whom wore pointe shoes while 23 did not. Specific procedures were used to obtain information related to MSD and foot injuries caused by dancing. Results: The most affected parts were the knees (29.7% with pointe shoes versus 39% without), spine (26.4% with pointe shoes versus 22% without), and ankle/foot (20% with pointe shoes versus 12.2% without). Through odds ratio and respective confidence intervals (IC95%), the study identified protection factor in the knees (0.24; CI95% - 0.09-0.64) and legs (0.11; CI95% - 0.02-0.65) for dancers who wear pointe shoes. It was found that the risk of injuries in specific structures of the foot is significantly higher among those dancers. In this case, the appearance of bunions (9.74; CI95% - 1.25-75,99), calluses on the toes (3.46; CI95% - 1.29-9.27) and the association of the three (4.47; CI95% - 1.69-11.83) were those that showed an increased risk factor compared to dancers who do not stand en pointe. Conclusion: The use of pointe shoes in elite Brazilian dancers was associated to lower occurrence of MSD in the knee and leg, however it was strongly associated to foot injuries.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Elétrica - FEIS
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture
Resumo:
The prognosis of tooth replantation is usually related to the need of endodontic treatment, which has a direct relationship with the occurrence of root resorptions. Several studies have been undertaken in an attempt to prevent, delay, or treat these complications, which are the main causes of loss of replanted teeth. This literature review examines research evidence on intracanal dressings and root canal filling materials used in cases of tooth replantation. A comprehensive search was performed in the Medline/Pubmed, Bireme and Scielo full-text electronic journal databases to retrieve English-language articles referring to these topics that had been published between 1964 and 2010. Calcium hydroxide (CH) remains the usually recommended choice as an intracanal medicament in replanted teeth; however, there is evidence to support the initial use of a corticosteroid-antibiotic combination such as Ledermix paste to control potential early resorption, prior to the introduction of CH where the beneficial effect in the treatment of progressive root resorption has been well proven. Regarding root filling materials, CH-containing sealers are a good option because of their biological properties. Accurate diagnosis and adequate treatment plan may constitute very complex tasks, particularly in tooth avulsion because several variables are involved. In addition to the technical knowledge and clinical experience directed toward the quality of treatment, patient education may favorably influence the survival of replanted teeth.
Resumo:
One of the areas of human identification is Cheiloscopy, the name given to the study of the lips, their characteristics (such as thickness, position of the grooves and grooves) and the record of the impressions left by them. There are variations in the layout of the lines and fissures of the lips, which are unique to each individual, permanent and unchanging. The lip print rarely changes, enduring minor traumas such as inflammation or sores. In criminal investigations, lip prints, visible through the presence of lipstick, can be found on glasses, napkins, clothes, cigarettes, indicating a relationship between the subject and the scene of the crime. Latent impressions may be revealed employing specific chemicals such as powder of silver and aluminum nitrate. Although it is not a very common method, Cheiloscopy may become very useful in forensics due to the extensive amount of valuable information that it brings. The objective of this study was to review the literature on the use of Cheiloscopy in human identification, using traditional and digital methods. It was found that the literature is still in need of studies in this area. The advent of new digital technologies can facilitate the implementation of technical expertise, generating speed and objectivity. New research studies are necessary, especially in the development of digital methods. The application of Cheiloscopy can greatlyhelp with Law, in the identification of living suspects and dead individuals. In the end the benefit will fall to society as a whole.
Resumo:
The goal of this study is to present and test a conceptual framework that describes the technical aspects (TA), human/organizational aspects (HOA) of the adoption of green product development (GPD) practices and the effect of these practices on firms'environmental (EP), operational (OP) and market performance (MP). To this end, after reviewing the literature on these themes, a conceptual framework with 5 hypotheses is proposed. These hypotheses were tested on 62 Brazilian companies through structural equation modeling using SmartPLS 2.0M3. The main results of this study are as follows: (a) in general, the proposed framework obtained adequate goodness of fit statistics (GoF); (b) technological factors are shown to have an influence on the adoption of GPD practices, and those practices are related to company EP, OP and MP, thus confirming 4 hypotheses of the study; and (c) one of the study's hypotheses is not validated, indicating that the relationship of human/organizational aspects to GPD must be further analyzed. This work extends the literature because: (a) the conceptual framework tested in this study establishes several concepts that have been only partially tested in the previous literature; (b) this work presents evidence about Brazil, where the themes addressed herein have not been yet been thoroughly investigated; and (c) the non-validation of the hypothesis regarding the relationship between human/ organizational aspects with respect to the adoption of product-related environmental practices requires attention. (C) 2014 Elsevier Ltd. All rights reserved.