Zoneamento geoambiental como subsídio na determinação de áreas de instabilidade em faixas de intervenção de dutos

Pós-graduação em Geociências e Meio Ambiente - IGCE

LAMINAR THERMALLY DEVELOPING FLOW INSIDE RIGHT-ANGULARLY TRIANGULAR DUCTS

An analytical approach based on the generalized integral transform technique is presented, for the solution of laminar forced convection within the thermal entry region of ducts with arbitrarily shaped cross-sections. The analysis is illustrated through consideration of a right triangular duct subjected to constant wall temperature boundary condition. Critical comparisons are made with results available in the literature, from direct numerical approaches. Numerical results for dimensionless average temperature and Nusselt numbers are presented for different apex angles.

Floristic composition of the tree stratum of a semideciduous mesophytic forest in the municipality of Botucatu, São Paulo state

The floristic composition was studied in an area of semideciduous mesophytic forest, with 120 ha, in the municipality of Botucatu, SP, Brazil. This forest lies on the ascent of the Cuesta of Botucatu. Due to the heterogeneity of the relief, for the sampling process, the forest was divided in three regions: the upper one (comprising the strip of forest on the plateau), middle on (the forestal area lied on the ascent properly said) and the lower one (the strip of forest on the plain). The tree sampling regions showed some differences among them and this must be connected to the differences in the soil.

Identificação e mapeamento da dinâmica fluvial com fins à avaliação da sensibilidade ao derrame de óleo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of random/aligned nylon-6/MWCNT fibers on dental resin composite reinforcement

The aims of this study were (1) to synthesize and characterize random and aligned nanocomposite fibers of multi-walled carbon nanotubes (MWCNT)/nylon-6 and (2) to determine their reinforcing effects on the flexural strength of a dental resin composite.Nylon-6 was dissolved in hexafluoropropanol (10 wt%), followed by the addition of MWCNT (hereafter referred to as nanotubes) at two distinct concentrations (i.e., 0.5 or 1.5 wt%). Neat nylon-6 fibers (without nanotubes) were also prepared. The solutions were electrospun using parameters under low- (120 rpm) or high-speed (6000 rpm) mandrel rotation to collect random and aligned fibers, respectively. The processed fiber mats were characterized by scanning (SEM) and transmission (TEM) electron microscopies, as well as by uni-axial tensile testing. To determine the reinforcing effects on the flexural strength of a dental resin composite, bar-shaped (20 x 2 x 2 mm(3)) resin composite specimens were prepared by first placing one increment of the composite, followed by one strip of the mat, and one last increment of composite. Non-reinforced composite specimens were used as the control. The specimens were then evaluated using flexural strength testing. SEM was done on the fractured surfaces. The data were analyzed using ANOVA and the Tukey's test (alpha=5%).Nanotubes were successfully incorporated into the nylon-6 fibers. Aligned and random fibers were obtained using high- and low-speed electrospinning, respectively, where the former were significantly (p<0.001) stronger than the latter, regardless of the nanotubes'presence. Indeed, the dental resin composite tested was significantly reinforced when combined with nylon-6 fibrous mats composed of aligned fibers (with or without nanotubes) or random fibers incorporated with nanotubes at 0.5 wt%. (C) 2015 Elsevier Ltd. All rights reserved.

Zoneamento bioclimático da ovinocultura no Estado do Paraná

Utilizaram-se 45 fêmeas ovinas adultas (15 Hampshire Down [HD], 15 Texel [TE] e 15 Ile de France [IF]), para propor um zoneamento bioclimático da ovinocultura no Estado do Paraná. Mediram-se a temperatura retal (Tr), da epiderme (Te), do interior do velo (Tiv) e da superfície do velo (Tsv); a frequência respiratória (Fr); a temperatura do ar (Ta), pressão de vapor (e), velocidade do vento (v) e carga térmica radiante (CTR). O Índice de Conforto Térmico utilizado foi ICT= 0,6678Ta + 0,4969e + 0,5444Tg + 0,1038v. A regressão do ICT sobre Tr mostrou efeito quadrático para as três raças. Para ICT=24,3, 27,3 e 20,6, os valores de Tr foram respectivamente: 39,10ºC para a raça HD, 39,05ºC para TE e 39,09ºC para IF, atingindo 40,40; 40,50; e 40,28ºC, respectivamente, para ICT=58. As três raças aumentaram sua Tr a partir de ICT=26, com a TE apresentando menor Tr até o valor ICT=46; neste ponto, as três raças foram semelhantes, tendo a TE apresentado maiores valores. Para ICT igual a 27,6; 29,7; e 27,0, os valores de Fr foram, respectivamente, 89,63; 77,08; e 78,77 resp./min., para as raças HD, TE e IF. A raça TE apresentou menor Fr (77,08 resp./min.), para ICT=29,7 e para ICT=48, valores semelhantes aos da IF (181,96 resp./min.); a partir deste índice, passou a ser maior que as demais raças, atingindo valores de 288,66 resp./min. no ICT=56, porém inferior à HD (289,01 resp./min.). Neste índice, a raça IF foi a que apresentou a menor Fr (275,72 resp./min.). Uma extensa faixa ao longo do litoral do Estado, entrando cerca de 200 km para o interior até os limites das cidades de Castro, Telêmaco Borba, Laranjeiras do Sul e Pato Branco, permite a criação das três raças, sem exigir grandes esforços de termorregulação.

Size distribution and sex ratio in the spider crab Epialtus brasiliensis (Dana 1852) associated with seaweed on a rocky shore in southeastern Brazil (Crustacea, Decapoda, Brachyura, Majoidea, Epialtidae).

This study analyzed a population of the spider crab Epialtus brasiliensis, in regard to its size distribution, sex ratio and Sexual maturity. The study was conducted on a rocky shore in the Ubatuba region, state of Silo Paulo, Brazil, where a wide strip of algae covers the intertidal zone. A total of 378 specimens were obtained: 200 males (128 juvenile and 72 adult crabs) and 178 females (46 juveniles and 132 adults). Their Sizes ranged from 3.4 to 16.7 mm carapace length (CL). Taking into account that the pubertal and terminal molts are coincident in majid crabs, the maximum sizes attained by males and females are especially dependent on the factors that influence sexual maturity, mainly food resources, temperature and intraspecific competition. Males of E. brasiliensis occurred in all size classes, whereas females occurred only as far the 10th size class (12-13 min CL). file total sex ratio did not differ statistically from 1 : 1, but when the juvenile and adult specimens were analyzed separately the differences between sexes were significantly different, with higher proportions of immature males and mature females. The CL50 calculated for males and females was 10.4, and 6.9 min CL, respectively. Thus, males reach their sexual maturity at a larger size than females. This feature may be important for the reproductive strategy of this species, because larger males probably have greater reproductive Success.

Faixas de controle de plantas daninhas e seus reflexos no crescimento de plantas de eucalipto

Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.

Clonagem do abacateiro variedade Duke 7 (Persea americana Mill.) por alporquia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Autologous orbicularis muscle for filling facial foldsan experimental and clinical study

Purpose: To present a technique for filling facial folds by using autologous orbicularis oculi muscle, based on an experimental model. Methods: two studies are presented: (1) an experimental study using 15 albino guinea-pigs from which a strip of the sural triceps muscle was removed and implanted in the subcutaneous tissue of the dorsal area. The animals were sacrificed 7, 30 and 60 days after the implantation, and the material was histologically evaluated. And (2%) an interventional prospective clinical trial carried out on 20 patients referred to blepharoplasty surgery. They received autologous preseptal orbicularis muscle for filling facial folds. The results where evaluated by patients satisfaction and clinical exam. Results: the sural tricep muscle, when implanted in the subcutaneous tissue, resulted in fibrosis. The patients whom received autologous orbicularis muscle implanted for filling facial folds showed that the procedure can be successfully carried out. Conclusions: autologous preseptal orbicularis muscle is a good material for filling facial folds. Cicatricial tissue will be formed on its implantation site, filling the tissue gap that forms the folds on the skin.

Efeito do álcool e formol sobre a composição isotópica de δ 13C e de δ 15N em Plagioscion squamosissimus e Hypophthalmus edentatus (Pisces, Osteichthyes)

The present study investigates the δ 13C and δ 15N isotopic composition in frozen samples (control), samples in alcohol and in formaldehyde of Plagioscion squamosissimus and Hypophthalmus edentatus. From each individual we extracted a strip of muscle from the region above the lateral line, in the dorsal fin base, that was divided into three equal parts, each one was submitted to one type of treatment: freeze - control group (-15oC), conservation in alcohol 70% and fixation in formaldehyde 4%. Samples were kept under those treatments for 30 days, washed and submerged in distilled water for 4 hours. Afterwards, they were dried up in air oven at 60oC for 48 hours and macerated until the obtaining of a fine powder. A significant difference was found in isotopic values of carbon and nitrogen, between the control and the samples in alcohol and formaldehyde, except for δ 13C from the H. edentatus samples in formaldehyde. The carbon isotopic values of samples in alcohol were mostly enriched compared to control, whereas the samples in formaldehyde presented depleted values in relation to the control. The nitrogen isotopic values for both samples preserved in alcohol and formaldehyde were enriched when compared to the values of frozen samples, independently of used preservatives. Therefore, the isotopic correction should be accomplished according to the isotope and preservative employed for species of freshwater fish.

Caracterização histoquímica e determinação do ciclo secretor da glândula salivar do tórax de Polistes versicolor (Olivier, 1791) (Hymenoptera: vespidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo tomográfico do encéfalo de cães dolicocefálicos, mesaticefálicos e branquicefálicos clinicamente sadios

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fabricação e caracterização metalográfica e mecânica de tiras de ligas metálicas fundidas e tixolaminadas no estado semi-sólido de diferentes intervalos de solidificação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da utilização de cartas geotécnicas em diferentes escalas para a gestão ambiental de rodovia em operação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)